Wetting of h-BN by molten Cu-8.8Zr-xTi ternary alloys at 1373 K
Source abstract
Abstract
Abstract The wetting of hexagonal boron nitride (h-BN) by molten Cu–Zr eutectic alloy with different Ti concentration (0-10 at.%) was studies by a modified sessile drop method at 1373 K under high vacuum. h-BN cannot be wetted by Cu–Zr eutectic alloy (equilibrium contact angle is ~128°), but a small addition of Ti (2.5 at.%) can decrease contact angle significantly. Interfacial reaction products Ti-nitride, Ti-diboride, Zr-nitride and Zr-diboride were observed and identified using SEM and XRD. The reason of contact angle decreasing with Ti concentration in wetting case of Cu-8.8Zr-xTi (x = 2.5, 7.5, 10) system is the reducing of stoichiometry of TiNy, which makes TiNy has a better metallic property. In addition, the adsorption of Ti at liquid/solid interface is not a negligible factor. In non-wetting cases of Cu-8.8Zr and Cu–10Ti, the negative molar exchange energy values between Cu–Zr and Cu–Ti indicate Zr and Ti would be attracted by the bulk of liquid. Thereby, the improvement in the wettability of h-BN by Cu–Zr and Cu–Ti binary alloys is very limited.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A nano-micro dual-scale particulate-reinforced copper matrix composite with high strength, high electrical conductivity and superior wear resistance10.1039/C8RA06020G ↗
2. Solid-solution copper alloys with high strength and high electrical conductivity10.1016/j.scriptamat.2012.12.027 ↗
3. Enhancing strength without compromising ductility in copper by combining extrusion machining and heat treatment10.1016/j.jmatprotec.2018.12.001 ↗
4. Exfoliated hexagonal boron nitride-based polymer nanocomposite with enhanced thermal conductivity for electronic encapsulation10.1016/j.compscitech.2013.10.018 ↗
5. High thermal conductivity of suspended few-layer hexagonal boron nitride sheets10.1007/s12274-014-0486-z ↗
6. High-temperature mechanical and thermal properties of h-BN/30vol%Y2SiO5 composite10.1016/j.ceramint.2015.05.030 ↗
7. Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics10.1016/j.msea.2014.03.132 ↗
8. Review on the properties of hexagonal boron nitride matrix composite ceramics10.1016/j.jeurceramsoc.2016.05.007 ↗
9. Superior thermal conductivity in suspended bilayer hexagonal boron nitride
10. Graphene analogues of BN : novel synthesis and properties10.1021/nn9018762 ↗
11. Boron nitride encapsulated copper nanoparticles: a facile one-step synthesis and their effect on thermal decomposition of ammonium perchlorate
12. Cutting performance of PVD-coated carbide and cBN tools in hard milling10.1016/j.ijmachtools.2010.10.007 ↗
13. Turning of interrupted and continuous hardened steel surfaces using ceramic and cBN cutting tools10.1016/j.jmatprotec.2011.01.002 ↗
14. Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system10.1016/j.vacuum.2019.05.014 ↗
15. Wetting and interfacial reaction between liquid Ag-Cu-Ti and SiO2f/SiO2 composites10.1016/j.vacuum.2019.109042 ↗
16. The effect of titanium ion implantation into carbon ceramic on its wettability by liquid copper10.1016/j.vacuum.2007.01.063 ↗
17. Eustathopoulos · 1999 · 298
18. Interfacial reaction between cubic boron nitride and Ti during active brazing10.1361/105994906X108747 ↗
19. Wettability of zirconium diboride ceramics by Ag, Cu and their alloys with Zr10.1016/S1359-6462(02)00361-5 ↗
20. On segregation of Zr and wettability of active Ag-Cu-Zr alloy on cubic boron nitride surface10.1016/j.matlet.2017.07.080 ↗
21. Some observations on the wetting and bonding of nitride ceramics10.1007/BF00584866 ↗
22. Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites10.1016/j.scriptamat.2008.09.004 ↗
23. Microstructural and mechanical properties of jointed ZrO2/Ti–6Al–4V alloy using Ti33Zr17Cu50 amorphous brazing filler10.1016/j.matdes.2012.12.023 ↗
24. Reactive wetting of TA2 pure Ti and TC4 alloy by molten Al 4043 alloy at 873–973 K10.1016/j.vacuum.2017.08.034 ↗
25. Vaporization of inorganic substance: B2O3, TeO2 and Mg3N210.1021/j150524a009 ↗
26. Wetting of TiN by liquid copper
27. Wetting of titanium nitride and titanium carbide by liquid metals10.1016/1359-6454(95)00165-0 ↗
28. Lequeux · 1998 · 112
29. Measurement of contact angle and work of adhesion at high temperature10.1007/s10853-005-1945-4 ↗
30. The wetting of refractory carbides, borides and nitrides by molten metals10.1007/BF00780116 ↗
31. Samsonov · 1973
32. Wetting of group Ⅳ diborides by liquid metals10.1007/s10853-006-0442-8 ↗
33. Study of the wetting of metal like borides by liquid metals
34. Interface interaction in the (B4C+TiB2)/Cu system10.1007/s10853-006-0436-6 ↗
35. Wetting behavior and interfacial interactions of molten Cu50Ti alloy with hexagonal BN and TiB2 ceramics10.1016/j.ceramint.2016.03.090 ↗
36. Study on the phase diagram of the Ti-B-N system and the interfacial reaction of the Ti/BN joints10.1016/j.msea.2004.10.018 ↗
37. Massalski · 1990
38. Effect of boron on the surface tension of molten silicon and its temperature coefficient10.1016/S0021-9797(03)00262-5 ↗
39. The effect of Me-Ti inter-atomic interactions on wetting in CaF2/(Me-Ti) systems: Ab-initio consideration10.1016/j.susc.2009.04.006 ↗
40. Characteristics of spreading dynamics for adsorption wetting at high temperatures10.1016/j.commatsci.2014.11.052 ↗