Wetting and interfacial reaction between liquid Ag-Cu-Ti and SiO2f/SiO2 composites
Source abstract
Abstract
Abstract The wetting and interfacial reaction between the liquid Ag-Cu-Ti and SiO2f/SiO2 composites were studied at 860 °C for various holding durations. Typical interfacial microstructure of the AgCuTi-SiO2f/SiO2 system was firstly investigated. The formation sequence of the reaction layers was discussed. Then the relationship between contact angles and the types of reaction products were revealed. Results show that the formation of the CuxTi6-xO (x = 2, 3) phase plays a key role on the wettability of the AgCuTi-SiO2f/SiO2 system. The microstructural evolution of the reaction products at the AgCuTi-SiO2f/SiO2 interface versus various holding durations was studied. Finally, the wetting mechanism of the AgCuTi-SiO2f/SiO2 system was proposed. This study can offer new insights into the reaction and joining nature of the AgCuTi-SiO2f/SiO2 system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Interfacial microstructure and improved wetting mechanism of SiO2f/SiO2 brazed with Nb by plasma treatment10.1016/j.vacuum.2017.06.041 ↗
2. Ambient and elevated temperature mechanical properties of hot-pressed fused silica matrix composite10.1016/S0955-2219(02)00156-5 ↗
3. Directionality effect on mechanical properties of 3D n-directional braided SiO2f/SiO2 composites prepared by silica sol-infiltration-sintering method10.1016/j.ceramint.2012.01.058 ↗
4. Mechanical behaviour and microstructural characterization of 3D four‐directional braided SiO2f/SiO2 composites10.1111/j.1460-2695.2012.01682.x ↗
5. Brazing SiO2f/SiO2 with TC4 alloy with the help of coating graphene10.1016/j.vacuum.2017.09.010 ↗
6. Active brazed Invar-SiO2f/SiO2 joint using a low-expansion composite interlayer10.1016/j.jmatprotec.2017.11.058 ↗
7. The effect of crystal structure of SiO2 on the wettability of AgCuTiSiO2f/SiO2 system10.1016/j.vacuum.2018.08.046 ↗
8. Brazing of SiO2f/SiO2 composite modified with few-layer graphene and Invar using AgCuTi alloy10.1016/j.matdes.2015.08.146 ↗
9. Wettability of silica substrates by silver–copper based brazing alloys inVacuo10.1111/j.1151-2916.2000.tb01660.x ↗
10. The effect of surface preoxidation of sintered silicon carbide on its wettability by silver–copper based brazing alloys in vacuo10.1016/S0921-5093(99)00044-1 ↗
11. Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis10.1016/j.apsusc.2017.12.106 ↗
12. Improved wetting of Al2O3 by molten Sn with Ti addition at 973–1273 K10.1016/j.jallcom.2017.12.350 ↗
13. The role of adsorption and reaction in wetting in the CuAg-Ti/alumina system10.1016/j.scriptamat.2004.05.002 ↗
14. The relation between wetting and interfacial chemistry in the CuAgTi/alumina system10.1016/j.actamat.2005.11.048 ↗
15. Wetting of microstructured alumina fabricated by epitaxial growth of Al4B2O9 whiskers10.1016/j.apsusc.2015.09.097 ↗
16. Effect of brazing conditions on microstructure and mechanical properties of Al2O3/Ti–6Al–4V alloy joints reinforced by TiB whiskers10.1016/j.jmst.2013.05.009 ↗
17. Microstructure and brazing mechanism of porous Si3N4/Invar joint brazed with Ag-Cu-Ti/Cu/Ag-Cu multi-layered filler10.1016/j.jmst.2017.07.001 ↗
18. Interfacial microstructures formation mechanism between SiO2 substrate and AgCuTi braze alloys10.1016/j.ceramint.2018.06.246 ↗
19. Effect of vertically oriented few-layer graphene on the wettability and interfacial reactions of the AgCuTi-SiO2f/SiO2 system
20. Microstructure and mechanical response of the SiO2f/SiO2 composite and Invar alloy joints brazed with an AgCuTi alloy10.1016/j.matdes.2016.08.075 ↗
21. Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system10.1016/j.vacuum.2019.05.014 ↗
22. Interface microstructure analysis of SiO2 glass ceramic and Ti6Al4V alloy joint brazed with TiZrNiCu alloy10.1179/174328409X428891 ↗
23. Interface microstructure and mechanical properties of the brazed SiO2 glass ceramic and 30Cr3 high-tensile steel joint10.1016/j.msea.2008.05.050 ↗
24. Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint10.1016/j.vacuum.2017.03.037 ↗
25. A review of underlying reasons for intergranular cracking for a variety of failure modes and materials and examples of case histories10.1016/j.engfailanal.2019.02.027 ↗
26. Investigation on viscosity, surface tension and non-reactive wettability of melting Ag-Cu-Xwt% Ti active filler metals10.1016/j.jallcom.2018.09.186 ↗
27. Wetting kinetics and spreading phenomena of the precursor film and bulk liquid in the AgCuTi/TC4 system10.1016/j.jallcom.2019.06.168 ↗
28. Reactive wetting of TiC-Ni cermet by Ag-Cu-Zn alloy during evaporation10.1016/j.vacuum.2017.01.014 ↗
29. Synthesis, properties, and ternary phase stability of M6X compounds in the Ti-Cu-O system10.1111/j.1151-2916.1993.tb06652.x ↗
30. The role of reactivity in wetting by liquid metals: a review10.1007/s10853-015-9331-3 ↗
31. Eustathopoulos · 1999 · vol. 3 · 261