Estimation of temperature in turbo-molecular pump based on motor resistance online identification
Source abstract
Abstract
Abstract The temperature of the turbo-molecular pump (TMP) system has to be monitored in real-time for long stable operation in a high vacuum environment. Since the high-speed motor is the major heat source of the TMP system, the thermal sensors such as Pt100 are widely used to measure the temperature via being embedded in the motor stators. However, these thermal sensors require extra wires and signal conditioning circuits, which increase the complexity of installation. In order to solve this problem, a real-time online estimation method for the temperature of the TMP driven motor is proposed in this paper. First of all, the resistance identification model of the high-speed motor used in TMP system is built. After that, an improved recursive least squares (RLS) algorithm, which introduces a discount factor to overcome the problem of data saturation and weak dynamic tracking, is used to identify the resistance of the motor stator windings. Then, the temperature of the TMP could be estimated indirectly based on the linear relationship between the motor stator resistance and the temperature. At last, the proposed method is tested in a self-developed magnetically levitated turbo-molecular pump (MLTMP) system, and the experimental results verify its validity and reliability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Hydraulic and Pneumatic Systems · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Vibration control of a turbomolecular vacuum pump using piezoelectric actuators
2. Pumping performance analysis on turbomolecular pump10.1016/j.vacuum.2011.02.010 ↗
3. Identification of sensorless rotor temperature estimation technique for permanent magnet synchronous motor
4. A survey of state-of-the-art methods to compute rotor eddy-current losses in synchronous permanent magnet machines
5. Investigation of the rotor temperature of a turbo-molecular pump with different motor drive methods10.1016/j.vacuum.2017.10.001 ↗
6. Model of the rotor temperature of turbo-molecular pumps in magnetic fields10.1016/j.vacuum.2011.09.009 ↗
7. Rotor temperature monitoring system
8. Magnet temperature estimation in surface PM machines during six-step operation10.1109/TIA.2012.2227097 ↗
9. Open-circuit fault detection in stranded PMSM windings using embedded FBG thermal sensors10.1109/JSEN.2019.2894097 ↗
10. Permanent-magnet temperature estimation in PMSMs using pulsating high-frequency current injection10.1109/TIA.2015.2404922 ↗
11. Expectation maximization particle filter and Kalman filter based permanent magnet temperature estimation for PMSM condition monitoring using high-frequency signal injection10.1109/TII.2016.2591509 ↗
12. Investigation of turbo-molecular pumps in strong magnetic fields10.1016/j.vacuum.2011.07.063 ↗
13. Mechanical stress and thermal aspects of the rotor assembly for turbomolecular pumps10.1016/j.vacuum.2016.03.026 ↗
14. A real-time thermal model of a permanent-magnet synchronous motor10.1109/TPEL.2009.2027905 ↗
15. An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers10.1109/TIE.2004.825280 ↗
16. Design aspects of a large scale turbomolecular pump with active magnetic bearings10.1016/j.vacuum.2016.12.010 ↗
17. Motor temperature monitoring based on impedance estimation at PWM frequencies10.1109/TEC.2013.2292566 ↗
18. Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management10.1109/TEC.2010.2051811 ↗
19. Online estimation of the stator resistances of a PMSM with consideration of magnetic saturation
20. Magnet temperature estimation in surface PM machines using high-frequency signal injection10.1109/TIA.2010.2049816 ↗
21. Jia · 2007
22. 2005
23. Ding · 2014
24. Ljung · 2002
25. On-line identification of an electro-hydraulic system using recursive least square
26. STAR recursive least square lattice adaptive filters
27. Performance bounds of forgetting factor least-squares algorithms for time-varying systems with finite measurement data10.1109/TCSI.2004.842874 ↗