journal article·2019-08

Effect of eccentric loading on energy absorbing circular cap and open end frusta tube structures

Vivek Patel, Gaurav Tiwari, Ravikumar Dumpala

Vacuum· Volume 166
Publisher page

Abstract

Abstract The response of cap end (C) and open end (O) frusta tube made of aluminium alloy AA-1080 were explored against eccentric loading by carrying out numerical simulation. The thickness of both type of frusta tube was varied as 1.15, 1.2 and 1.3 mm whereas height of open end and cap end frusta tube were considered as 91.6 and 103 mm respectively. The semi-apical angle was varied as 5.71°and 7.59° which resulted base diameter 60.8 and 67.2 mm for both type of tubes respectively. The variation in eccentricity of loading from the axis of the tubes was kept as 5, 8 and 12 mm. The numerical simulations were carried out by using commercial finite element code LS-DYNA. The performance of structures was decided based on crashworthiness parameters like Peak force, Mean crushing force, Crash load efficiency and Energy absorption capability. For validating the numerical results, experiments were performed on compression testing machine wherein both cap end and open end specimens with the thickness of 1.15 mm were compressed with eccentricity 5 mm. The actual results were found close enough with predicted results. Cap end structure showed higher Crash load efficiency and energy absorption compared to the open end frusta tube.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A review on tailored blanks—production, applications and evaluation10.1016/j.jmatprotec.2013.08.015 ↗
2. Hot stamping of boron steel sheets with tailored properties: a review10.1016/j.jmatprotec.2015.09.023 ↗
3. Numerical study of axially crushed cylindrical tubes with corrugated surface10.1016/j.tws.2008.12.008 ↗
4. Elastic–plastic theory for initial buckling load of thin-walled grooved tubes under axial compression10.1016/S0924-0136(02)00383-7 ↗
5. Axial crushing behavior and energy absorption efficiency of corrugated tubes10.1016/j.matdes.2013.09.031 ↗
6. Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading10.1016/j.tws.2010.01.012 ↗
7. Optimum crashworthiness design of tapered thin-walled tubes with lateral circular cutouts10.1016/j.tws.2016.07.018 ↗
8. A review on functionally graded structures and materials for energy absorption10.1016/j.engstruct.2018.05.094 ↗
9. Relative merits of conical tubes with graded thickness subjected to oblique impact loads10.1016/j.ijmecsci.2015.04.013 ↗
10. A study on mode of collapse of varying wall thickness metallic frusta subjected to axial compression10.1016/j.tws.2007.10.005 ↗
11. Crashworthiness performance of conical tubes with nonlinear thickness distribution10.1016/j.tws.2015.11.007 ↗
12. A numerical study on the impact response and energy absorption of tapered thin-walled tubes10.1016/j.ijmecsci.2004.03.006 ↗
13. Numerical simulation of thin-walled metallic circular frusta subjected to axial loading10.1533/ijcr.2005.0365 ↗
14. Modes of axial collapse of unconstrained capped frusta10.1016/S0020-7403(02)00018-8 ↗
15. Folding-crumpling of thin-walled aluminium frusta10.1533/cras.2002.0207 ↗
16. Mode of collapse and energy absorption characteristics of constrained frusta under axial impact loading10.1016/S0020-7403(00)00036-9 ↗
17. Hallquist · 2006
18. Minimum mass design of thin tubular structures under eccentric compressive loading10.1016/j.tws.2015.01.006 ↗
19. Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries10.1016/j.tws.2010.07.003 ↗
20. Computer simulation and energy absorption of tapered thin-walled rectangular tubes10.1016/j.tws.2005.03.008 ↗