Irradiation of sputtered Al-Si-N coatings by pulsed 200 keV C+ ion beam
Source abstract
Abstract
Abstract This paper reports on the effect of the irradiation of Al-Si-N coatings by an intense pulsed ion beam. The Al-Si-N coating was deposited on a steel substrate by a reactive magnetron sputtering. The Al-Si-N coating with a high silicon content (30 at.%) was irradiated by a high-intense pulsed C + ion beam. It was shown that metastable growth defects (GDs) created in the Al-Si-N coating during deposition can be healed up by its post-deposition irradiation using several pulses (1 and 10) of C + ions with energy E i = 200 keV, ion current density i s = 7 A/cm 2 , pulse duration t p = 110 ns and radiation dose 2 MGy. The reduction in deposition-induced GD density results in an increased transmittance of the Al-Si-N coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Properties of magnetron sputtered Al–Si–N thin films with a low and high Si content10.1016/j.surfcoat.2007.12.024 ↗
2. Optical studies of AlN/n-Si (100) films obtained by the method of high-frequency magnetron sputtering10.1134/S1063782608020139 ↗
3. Characterization of (Al, Si) N films deposited by balanced magnetron sputtering10.1016/j.tsf.2009.03.173 ↗
4. Magnetron sputtering of Si-Al-N nanocomposite coatings on quartz for protection against impacts of high speed microparticles10.1016/j.vacuum.2017.06.018 ↗
5. Magnetron deposition of metal-ceramic protective coatings on glasses of windows of space vehicles10.1063/1.4901499 ↗
6. Effect of the nanostructuring of a Cu substrate on the fracture of heat-resistant Si-Al-N coatings during uniaxial tension10.1134/S1063784212060205 ↗
7. Comparison of Al–Si–N nanocomposite coatings deposited by HIPIMS and DC magnetron sputtering10.1016/j.surfcoat.2013.06.076 ↗
8. Morphology, microstructure evolution and optical properties of Al–Si–N nanocomposite coatings10.1016/j.surfcoat.2014.08.053 ↗
9. AlN/Si3N4 multilayers as an interface model system for Al1− xSixN/Si3N4 nanocomposite10.1016/j.surfcoat.2014.10.021 ↗
10. Flexible hard Al-Si-N films for high temperature operation10.1016/j.surfcoat.2016.05.054 ↗
11. Optical absorption peculiarities of Al-Si-N coatings produced by magnetron sputtering10.4028/www.scientific.net/KEM.712.3 ↗
12. Effect of energy on the formation of flexible hard Al-Si-N films prepared by magnetron sputtering10.1016/j.vacuum.2016.08.014 ↗
13. Radiation stability of nanomaterials
14. Ion‐induced degradation of phase stability and hardness of TiZrSiN nanocomposite thin films10.1002/pssc.201400142 ↗
15. Ion irradiation tolerance of TiSiN nanocomposite coating10.1016/j.surfcoat.2016.08.044 ↗
16. Irradiation resistance, microstructure and mechanical properties of nanostructured (TiZrHfVNbTa) N coatings10.1016/j.jallcom.2016.04.064 ↗
17. Nanostructured multielement (TiHfZrNbVTa) N coatings before and after implantation of N+ ions (1018 cm− 2): their structure and mechanical properties10.1016/j.nimb.2016.09.002 ↗
18. Improved irradiation tolerance of W thin films with homogeneouslymultilayered structure10.1016/j.surfcoat.2017.01.091 ↗
19. Application of high-power ion beams for technology10.1017/S0263034600006467 ↗
20. High intensity pulsed ion beam sources and their industrial applications10.1016/S0257-8972(99)00058-4 ↗
21. Electronic building and properties of aluminum nitride irradiated with ions
22. Electron trap level of hydrogen incorporated nitrogen vacancies in silicon nitride10.1063/1.4914163 ↗
23. Effect of topological disorder on structural, mechanical, and electronic properties of amorphous silicon nitride: an atomistic study10.1103/PhysRevB.85.205209 ↗
24. Optical properties of silicon nitride films deposited by hot filament chemical vapor deposition10.1063/1.359062 ↗