journal article·2017-06

Bipolar and rewritable switching of one diode–one resistor nonvolatile strontium titanate nickelate memory devices

Ke-Jing Lee, Yu-Chi Chang, Cheng-Jung Lee, Yeong-Her Wang

Vacuum· Volume 140
Publisher page

Abstract

Abstract A bipolar-type one diode–one resistor (1D1R) memory device is proposed and demonstrated by integrating a Ni/TiO 2 /Ti diode and an Al/Strontium Titanate Nickelate (STN)/Pt bipolar resistive random access memory cell to suppress undesired sneak current in a cross-point array. Uniform self-compliance resistive-switching characteristics can be achieved by reverse bias current of the Ni/TiO 2 /Ti diode. Experimental results show that the bipolar 1D1R memory device has reproducible, uniform, and self-rectifying resistive-switching behavior in low-resistance state. High current ON/OFF ratio (>10 5 ) and satisfactory retention (>>10 5 s) are achieved. Therefore, the proposed device exhibits high potential for high-density integrated nonvolatile memory applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Ferroelectric and Negative Capacitance Devices · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Two series oxide resistors applicable to high speed and high Density nonvolatile memory10.1002/adma.200700251 ↗
2. A self-rectifying AlOy bipolar RRAM with sub-50-uA set/reset current for cross-bar architecture10.1109/LED.2012.2210855 ↗
3. (In,Sn)2O3/TiO2/Pt schottky-type Diode switch for the TiO2 resistive switching memory array10.1063/1.2912531 ↗
4. Rewritable switching of one Diode–one resistor nonvolatile organic memory Devices10.1002/adma.200903203 ↗
5. Low-temperature-grown transition metal oxide based storage materials and oxide transistors for high-density non-volatile memory10.1002/adfm.200801032 ↗
6. 32 × 32 crossbar array resistive memory composed of a stacked Schottky diode and unipolar resistive memory10.1002/adfm.201202170 ↗
7. ZnO-based one Diode-one resistor Device structure for crossbar memory applications10.1063/1.3701722 ↗
8. Control of resistance switching voltages in rectifying Pt/TiOx/Pt trilayer10.1063/1.2838350 ↗
9. 2-Stack ID-IR cross-point structure with oxide diodes as switch elements for high density resistance RAM applications
10. Stack friendly all-oxide 3D RRAM using gainzno peripheral TFT realized over glass substrates
11. Control of resistance switching voltages in rectifying Pt/TiOx/Pt trilayer10.1063/1.2838350 ↗
12. A ZnO cross-bar array resistive random access memory stacked with heterostructure diodes for eliminating the sneak current effect10.1063/1.3599707 ↗
13. Very low reset current achieved in oxygen vacancy controlled regime10.1109/LED.2011.2127443 ↗
14. Effects of electrodes on the switching behavior of strontium titanate nickelate resistive random access memory10.3390/ma8105374 ↗
15. Deactivation of TiO2 photocatalytic films loaded on aluminium: XPS and AFM analyses10.1016/j.apsusc.2005.09.023 ↗
16. Influence of substrates on resistive switching behaviors of V-doped SrTiO3 thin films, Jpn10.7567/JJAP.53.035503 ↗
17. A novel synthesis of SrCO3–SrTiO3 nanocomposites with high photocatalytic activity10.1007/s11051-014-2804-5 ↗
18. Competition of resistive-switching mechanisms in nickel-richnickel oxide thin films10.1149/1.3609261 ↗
19. Reproducible switching effect in thin oxide films for memory applications10.1063/1.126902 ↗
20. Nanoionics-based resistive switching memories10.1038/nmat2023 ↗
21. Novel self-compliance bipolar 1D1R memory Device for high-density RRAM application
22. Metal–oxide RRAM10.1109/JPROC.2012.2190369 ↗
23. Voltage-polarity-independent and high-speed resistive switching properties of V-doped SrZrO3 thin films10.1109/TED.2007.908867 ↗
24. Resistive switching behavior and multiple transmittance states in solution-processed tungsten oxide10.1021/am200430y ↗
25. Bipolar resistive switching behavior in sol-gel MgTiNiOx memory Device10.1109/JEDS.2016.2560879 ↗