journal article·2011-06

Modification of surface properties of silicon micro-molds by nitrogen and silicon doped diamond-like carbon coatings deposited with magnetron co-sputtering

B. Saha, E. Liu, S.B. Tor, D.E. Hardt, J.H. Chun

Vacuum· Volume 85· Issue 12
Publisher page

Abstract

This paper investigated the effect of nitrogen gas (N2) flow rate on the structural, mechanical and tribological properties of nitrogen (N) and silicon (Si) doped diamond-like carbon (Si:DLC:N) coatings deposited on Si micro-molds via magnetron co-sputtering deposition with respect to the bare Si molds. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) showed that the amount of sp2 bonds and cluster size of the coatings increased with the increase in N2 flow rate. It was noticed that the surface roughness (Rq) of the Si:DLC:N coated molds increased from about 3.8 to 7.8 nm with increased nitrogen flow rate from 5 × 10−6 to 25 × 10−6 m3/min, but the variation of roughness between the coated and uncoated Si molds was not significant. Ethylene glycol and deionized (DI) water were used to measure their contact angles with the mold surfaces, which were used to evaluate the surface energy of the molds. The total surface energy of the coated molds increased from about 38.2 × 10−3 to 66.5 × 10−3 N/m with the increase in N2 flow rate from 5 × 10−6 to 25 × 10−6 m3/min. The coefficient of friction (COF) of the coated molds decreased with increased N2 flow rate. Highlights ► Study on properties of DLC coatings. ► Effect of N2 of gas flow rate on structural, mechanical, tribological properties. ► Evaluation performance of DLC coated micromold on hot-embossing process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Saha · J Micromech Microeng · 2009 · 19 · 10502510.1088/0960-1317/19/10/105025 ↗
2. Robertson · Mater Sci Eng R · 2002 · 37 · 12910.1016/S0927-796X(02)00005-0 ↗
3. Oka · Surf Coat Technol · 2004 · 186 · 14110.1016/j.surfcoat.2004.04.010 ↗
4. Bonetti · Thin Solid Films · 2006 · 515 · 37510.1016/j.tsf.2005.12.154 ↗
5. Monteiro · Surf Coat Technol · 2003 · 163–164 · 14410.1016/S0257-8972(02)00488-7 ↗
6. Chen · Thin Solid Films · 2001 · 398–399 · 11010.1016/S0040-6090(01)01455-9 ↗
7. Fowkes · J Phys Chem · 1963 · 67 · 253810.1021/j100806a008 ↗
8. Kaelble · Polymer · 1977 · 18 · 47510.1016/0032-3861(77)90164-1 ↗
9. Liu · Surf Coat Technol · 2009 · 203 · 182910.1016/j.surfcoat.2009.01.008 ↗
10. Richter · J Non-Cryst Solids · 1986 · 88 · 13110.1016/S0022-3093(86)80093-X ↗
11. Liu · J Appl Phys · 1999 · 86 · 607810.1063/1.371657 ↗