Plasma modification and deposition on inner tube faces by pulsed DC discharges
Source abstract
Abstract
Abstract The modification of inner surfaces of tubes becomes increasingly important in many fluid transport applications. However, long tubes require special plasma techniques for a surface functionalization on the nanometer scale without damaging the bulk. This work focuses on pulsed DC glow discharges in inert argon, reactive oxygen, nitrogen and air plasma as well as polymerizing acetylene plasma revealing strong influences to the wetting behavior by the total duration of the plasma discharge time (plasma on-time). While the investigated polymers polyamide, polycarbonate, polyethylene terephtalate, and thermoplastic polyurethane react very differently on the inert and reactive etching (activation) plasma, the deposition of plasma polymer films (polymer-like carbon with decreasing cross-linking at lower plasma intensity and >50% hydrogen content) suppresses all substrate influences.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Grünwald · 1992
2. Benz · 1989
3. Plasmapolymerisierte Sperrschichten – Diffusionsprobleme lösbar
4. A model for the discharge kinetics and plasma chemistry during plasma enhanced chemical vapor deposition of amorphous silicon10.1063/1.340989 ↗
5. 2000
6. Thick coatings of doped synthetic silica glass by plasma impulse CVD
7. Plasma pulsed CVD deposition of TiO2 waveguiding films: properties and potential applications in integrated optical sensor systems10.1557/PROC-276-117 ↗
8. New insights into aging phenomena from plasma chemistry10.1016/j.nima.2003.08.125 ↗
9. The competitive ablation and polymerization (CAP) principle and the plasma sensitivity of elements in plasma polymerization and treatment10.1002/(SICI)1099-0518(20000315)38:6<943::AID-POLA3>3.0.CO;2-3 ↗
10. Karwoski T, Matsuzawa Y. Glow discharge process for producing implantable devices. US Patent 4.632.842.
11. Plasma deposition of tetraglyme inside small diameter tubing: optimization and characterization10.1002/jbm.a.30906 ↗
12. Biedermann A. Verfahren zur Innenbeschichtung elektrisch nicht leitender Hohlkörper. DE Patent 36.25.356.
13. Chapman · 1980
14. Liebermann · 2005
15. Selective surface modification of polymers by means of hydrogen and oxygen plasmas10.1002/pol.1983.170210319 ↗
16. Mitsuharu · 1992
17. Hollahan · 1974
18. Plasmamodifizierung von Polymeroberflächen. 1. Plasma-Polymer-Wechselwirkung10.1002/actp.1980.010311208 ↗
19. Sanderson · 1983
20. Sanderson · 1976
21. Plasma surface treatment of polymers: Interfacial properties of adhesion
22. An introduction to plasma polarisation
23. Rother · 1992
24. Konuma · 1992
25. Biederman · 1992
26. Plasma chemistry and growth of nanosized particles in a C2H2 RF discharge10.1088/0022-3727/34/14/312 ↗
27. Growth mechanism of amorphous hydrogenated carbon10.1016/S0925-9635(01)00553-2 ↗
28. Mechanisms and kinetics study of polymeric thin-film deposition in glow discharge10.1080/00222337608061191 ↗
29. Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond10.1098/rsta.2004.1452 ↗
30. Raman Spectrum of graphite
31. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗