CuSbS2 thin films by heat treatment of thermally evaporated Sb2S3/CuS stack: Effect of [Cu]/[Sb] ratio on the physical properties of the films
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. CuSbS2as a promising earth-abundant photovoltaic absorber material: a combined theoretical and experimental study10.1021/cm500516v ↗
2. Spray pyrolysed thin films of copper antimony sulfide as photovoltaic absorber
3. Post annealing effects on structural, optical and electrical properties of CuSbS2 thin films fabricated by combinatorial thermal evaporation technique10.1016/j.spmi.2015.10.024 ↗
4. Investigation on dispersive optical constants and microstructural parameters of the absorber CuSbS2 thin films10.1016/j.vacuum.2014.11.017 ↗
5. Effect of substrate temperature on properties of co-evaporated copper antimony sulfide thin films
6. CuSbS2 solar cells using CdS, In2S3 and the in/Cd-based hybrid buffers10.1007/s11664-021-08815-w ↗
7. Thin fi lm solar cell based on CuSbS 2 absorber prepared by chemical bath deposition (CBD)10.1016/j.materresbull.2016.11.028 ↗
8. Properties of CuSbS2thin films electrodeposited from ionic liquids as p-type absorber for photovoltaic solar cells10.1016/j.tsf.2014.06.031 ↗
9. Novel design of reactor to grow CuSbS2 films by chalcogenisation of metal precursors sequentially evaporated10.1016/j.jmrt.2021.08.144 ↗
10. Thin film solar cell based on CuSbS2absorber fabricated from an electrochemically deposited metal stack10.1016/j.tsf.2013.11.046 ↗
11. Fabrication and characterization of cost-efficient CuSbS2thin film solar cells using hybrid inks10.1016/j.solmat.2016.02.013 ↗
12. Core levels, band Alignments, and valence-band states in CuSbS2 for solar cell applications10.1021/acsami.7b14208 ↗
13. High open ‐ circuit voltage CuSbS2 solar cells achieved through the formation of epitaxial growth of CdS/CuSbS2 hetero ‐ interface by post ‐ annealing treatment
14. Structural, optical and charge generation properties of chalcostibite and tetrahedrite copper antimony sulfide thin films prepared from metal xanthates10.1039/C5TA05777A ↗
15. Selective nanocrystal synthesis and calculated electronic structure of all four phases of copper-antimony-sulfide10.1021/cm5005642 ↗
16. Two-stage processed CuSbS2 thin fi lms for photovoltaics : effect of Cu/Sb ratio10.1016/j.ceramint.2018.05.117 ↗
17. P-Type CuSbS2thin films by thermal diffusion of copper into Sb2S310.1016/j.solmat.2010.06.011 ↗
18. Analytical modeling and simulation of CIGS solar cells10.1016/j.egypro.2013.07.071 ↗
19. Full space device optimization for solar cells10.1038/s41598-017-12158-0 ↗
20. Prospects of Zn(O,S) as an alternative buffer layer for Cu2ZnSnS4 thin-film solar cells from numerical simulation10.1049/mnl.2016.0130 ↗
21. Efficiency enhancement of CZTSSe solar cells via screening the absorber layer by examining of different possible defects10.1038/s41598-020-75686-2 ↗
22. Optik Development of CZTGS/CZTS tandem thin fi lm solar cell using10.1016/j.ijleo.2018.09.033 ↗
23. Numerical simulation of ultra-thin CdTe solar cells with a buffer layer of MoOx in the backwall configuration10.1016/j.cjph.2018.08.013 ↗
24. Physical device modeling of CdTe ultrathin film solar cells10.1016/j.solener.2016.02.046 ↗
25. Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness10.1016/j.solmat.2007.04.006 ↗
26. Numerical simulation of highly efficient lead-free all-perovskite tandem solar cell10.1016/j.solener.2020.08.003 ↗
27. Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency
28. The study of some materials as buffer layer in copper antimony sulphide (CuSbS 2) solar cell using SCAPS 1-D10.1109/PVSC.2017.8366580 ↗
29. Simulation studies on photovoltaic response of ultrathin CuSb(S/Se)2 ternary compound semiconductors absorber-based single junction solar cells10.1002/er.5158 ↗
30. High efficiency non-toxic CuSbS2 -based heterojunction solar cell with TiO2 electron transport layer
31. The role of the annealing temperature on the microstructural evolution of CuSbS2 thin films prepared by cationic exchange10.1016/j.solmat.2018.05.029 ↗
32. Preparation of CuSbS2 thin films by a facile and low-cost chemical solution method10.1007/s10854-017-8351-y ↗
33. Development of phase-pure CuSbS2thin films by annealing thermally evaporated CuS/Sb2S3stacking layer for solar cell applications10.1016/j.mssp.2018.02.029 ↗
34. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
35. The influence of interface state and energy barriers on the efficiency of heterojunction solar cells10.1088/0022-3727/11/5/009 ↗
36. Analysis of back-contact interface recombination in thin-film solar cells10.1109/JPHOTOV.2018.2819664 ↗
37. Numerically investigating the AZO/Cu2O heterojunction solar cell using ZnO/CdS buffer layer
38. Improved photocurrent in Cu(in,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
39. Theoretical studies of single and tandem Cu2ZnSn(S/Se)4 junction solar cells for enhanced efficiency10.1016/j.optmat.2018.05.030 ↗
40. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
41. Growth and vacuum post-annealing effect on the properties of the new absorber CuSbS2 thin films10.1016/j.matlet.2008.04.003 ↗
42. The impact of lone-pair electrons on the lattice thermal conductivity of the thermoelectric compound CuSbS 210.1039/C6TA10420G ↗
43. CuSbS2thin films by rapid thermal processing of Sb2S3-Cu stack layers for photovoltaic application10.1016/j.solmat.2017.02.005 ↗
44. Raman spectra of isolated and interconnected pyramidal XS3 groups (X = Sb,Bi) in stibnite, bismuthinite, kermesite, stephanite and bournonite10.1127/0935-1221/2009/0021-1914 ↗
45. Two-stage co-evaporated CuSbS2 thin films for solar cells10.1016/j.jallcom.2016.04.193 ↗
46. Optical properties and electronic structures of CuSbS2, CuSbSe2, and CuSb(S1-xSex)2 solid solution
47. Solution-processed CuSbS2thin film: a promising earth-abundant photocathode for efficient visible-light-driven hydrogen evolution10.1016/j.nanoen.2016.08.036 ↗
48. Energy band alignment in chalcogenide thin film solar cells from photoelectron spectroscopy10.1088/0953-8984/27/13/134201 ↗
49. Pinning down high-performance Cu-chalcogenides as thin-film solar cell absorbers: a successive screening approach10.1063/1.4950818 ↗
50. Band Alignments , band gap , core-levels and valence-band states in Cu3BiS3 for photovoltaics10.1021/acsami.9b04268 ↗
51. Natural band Alignments and band offsets of Sb2Se3Solar cells10.1021/acsaem.0c01477 ↗
52. Energy band alignment at the heterointerface between CdS and Ag-alloyed CZTS10.1038/s41598-020-73828-0 ↗
53. Saleh · 1991
54. Effects of thermochemical treatment on CuSbS2 photovoltaic absorber quality and solar cell reproducibility10.1021/acs.jpcc.6b04206 ↗
55. Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete10.1590/S1983-41952015000400007 ↗
56. CuSbS2 nanobricks as electrode materials for lithium ion batteries10.1016/S1452-3981(23)13031-8 ↗
57. Thickness effect on the structural and optical constants of stibnite thin films prepared by sulfidation annealing of antimony films10.1016/j.ijleo.2013.10.114 ↗
58. CuSbS2 thin film formed through annealing chemically deposited Sb2S3-CuS thin films10.1016/S0022-0248(01)00672-8 ↗
59. Thin films of copper antimony sulfide: a photovoltaic absorber material10.1016/j.materresbull.2014.10.027 ↗
60. Investigation of optical framework of chalcostibite nanocrystal thin films: an insight into refractive index dispersion, optical band gap and single-oscillator parameters10.1016/j.jallcom.2017.06.157 ↗
61. Structural and electrical properties of CuSbTe/sub 2/, CuSbSe/sub 2/and CuSbS/sub 2/chalcogenide this films
62. Influence of the thickness on structural, optical and electrical properties of chemical bath deposited CdS thin films10.1016/S0927-0248(02)00283-0 ↗
63. Fourier-transform analysis of multiexponential curves observed in photoconductivity studies10.1103/PhysRevB.41.8545 ↗
64. A study of trap and recombination centers in MAPbI 3 perovskites10.1039/C6CP06261J ↗
65. Stable p-type conductivity and enhanced photoconductivity from nitrogen-doped annealed ZnO thin film10.1016/j.tsf.2012.02.081 ↗
66. Structural, optical and electrical properties of copper antimony sulfide thin films grown by a citrate-assisted single chemical bath deposition10.1016/j.apsusc.2017.08.027 ↗
67. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison10.1016/S0379-6779(99)00354-9 ↗
68. Kelvin probe force microscopy on III-V semiconductors: the effect of surface defects on the local work function10.1016/S0921-5107(03)00020-5 ↗