journal article·2022-01Open access

Effect of low-energy ion assistance on the properties of sputtered ZrB2 films

Claudia Schnitter, Ivan Petrov, Igor Zhirkov, Lars Hultman, Justinas Palisaitis, Johanna Rosen, Hans Högberg

Vacuum· Volume 195

Abstract

Zirconium diboride (ZrB2) films have been deposited by direct current magnetron sputtering (DCMS) from a ZrB2 compound target on Al2O3 (0001) substrates held at 600, 700, 800, and 900 °C, and with two different axial magnetic field strengths, 34 and 104 G, generated using a coil surrounding the substrate. Plasma probe measurements show an increase of the ion fluxes on floating-potential substrates of the two different configurations by a factor of 2.8 for 104 G compared to 34 G, while the ion energy remained relatively constant at ≈12 eV. Time-of-flight elastic recoil detection analysis (ToF-ERDA) show that films deposited with a magnetic field of 34 G are highly overstoichiometric with B/Zr ratios ≈2.4, while films deposited with 104 G exhibit a B/Zr ratios ≈2.1. The levels of oxygen and carbon in the films are below 1 at. % irrespective of growth conditions. X-ray diffraction (XRD) θ/2θ scans, complemented by pole figure measurements, reveal that all deposited films are 0001-oriented. XRD θ/2θ scans of the 000ℓ peak intensities and ω (rocking-curve) widths show increased ZrB2 crystal quality with increasing temperature for both magnetic field strengths. Minimum electrical resistivity of ≈100 μΩcm is achieved for an axial magnetic field of 104 G, independent of temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Metallization and glassing of silicon integrated circuits
2. Diffusion barriers in thin films10.1016/0040-6090(78)90184-0 ↗
3. Diboride diffusion barriers in silicon and GaAs technology10.1116/1.583466 ↗
4. Borides in thin film technology10.1006/jssc.1997.7456 ↗
5. Self-organized nanocolumnar structure in superhard TiB2 thin films10.1063/1.1887824 ↗
6. Controlling the B/Ti ratio of TiBx thin films grown by high-power impulse magnetron sputtering
7. Microstructure and materials properties of understoichiometric TiBx thin films grown by HiPIMS10.1016/j.surfcoat.2020.126537 ↗
8. Chemical vapor deposition of titanium diboride10.1016/0022-0248(74)90247-4 ↗
9. Growth of single-crystalline zirconium diboride thin film on sapphire10.1063/1.3226881 ↗
10. Hard and elastic epitaxial ZrB2 thin films on Al2O3(0001) substrates deposited by magnetron sputtering from a ZrB2 compound target10.1016/j.actamat.2016.03.064 ↗
11. Fully strained low-temperature epitaxy of TiN/MgO(001) layers using high-flux, low-energy ion irradiation during reactive magnetron sputter deposition10.1016/j.tsf.2010.04.028 ↗
12. Effects of high-flux low-energy ion bombardment on the low-temperature growth morphology of TiN(001) epitaxial layers10.1103/PhysRevB.61.16137 ↗
13. Physical properties of epitaxial ZrN/MgO(001) layers grown by reactive magnetron sputtering
14. Non-reactively sputtered TiN and TiB2 films: influence of activation energy on film growth10.1016/S0257-8972(97)00331-9 ↗
15. Microstructure and properties of nitride and diboride hard coatings deposited under intense mild-energy ion bombardment10.1016/S0257-8972(99)00198-X ↗
16. Controlling the boron-to-titanium ratio in magnetron-sputter-deposited TiBx thin films
17. Influence of plasma parameters on the growth and properties of magnetron sputtered CNx thin films10.1063/1.373690 ↗
18. Charged particle fluxes from planar magnetron sputtering sources10.1116/1.573470 ↗
19. Use of an externally applied axial magnetic field to control ion/neutral flux ratios incident at the substrate during magnetron sputter deposition10.1116/1.577812 ↗
20. Electrostatic probe measurements in the glow discharge plasma of a D. C. Magnetron sputtering system10.1002/ctpp.2150280207 ↗
21. Potku - new analysis software for heavy ion elastic recoil detection analysis10.1016/j.nimb.2014.02.016 ↗
22. Use of cleaved wedge geometry for plan‐view transmission electron microscopy sample preparation
23. McDaniel · 1964
24. Experiment and simulation of the compositional evolution of Ti-B thin films deposited by sputtering of a compound target10.1063/1.2978211 ↗
25. Stoichiometric, epitaxial ZrB2 thin films with low oxygen-content deposited by magnetron sputtering from a compound target: effects of deposition temperature and sputtering power10.1016/j.jcrysgro.2015.08.012 ↗
26. Synthesis and properties of some refractory transition metal diboride thin films10.1016/0040-6090(83)90010-X ↗
27. Deposition of zirconium boride thin films by direct current triode sputtering10.1116/1.574103 ↗
28. Electrical resistivity of titanium diboride and zirconium diboride10.1111/j.1151-2916.1995.tb08498.x ↗
29. Zirconium diboride (0001) as an electrically conductive lattice-matched substrate for gallium nitride10.1143/JJAP.40.L1280 ↗
30. Effect of substrate temperature on the properties of ZrB2 film on Si(111) deposited by pulsed DC magnetron sputtering10.7567/JJAP.53.095503 ↗
31. Direct current magnetron sputtered ZrB2 thin films on 4H-SiC(0001) and Si(100)10.1016/j.tsf.2013.11.040 ↗
32. ZrB2 thin films grown by high power impulse magnetron sputtering from a compound target10.1016/j.tsf.2012.11.006 ↗
33. Characteristics of sputter-deposited TiN, ZrB2 and W2B diffusion barriers for advanced metallizations to GaAs10.1016/S0038-1101(99)00024-6 ↗
34. Low temperature deposited Zr-B film applicable to extremely thin barrier for copper interconnect10.1016/j.apsusc.2009.05.118 ↗
35. Application of ZrB2 thin film as a low emissivity film at high temperature10.1016/j.apsusc.2020.146763 ↗
36. Atom probe tomography field evaporation characteristics and compositional corrections of ZrB210.1016/j.matchar.2019.109871 ↗