Diffusion behavior of fcc and L12 Ni–Al–Cr alloys
Source abstract
Abstract
Abstract In this paper, 12 groups of single-phase (γ and γ′) Ni–Al–Cr diffusion couples were carefully fabricated, and their concentration profiles at 1423, 1473, and 1523 K were measured by means of electron probe microanalysis technique. Atomic mobilities of γ phase in ternary Ni–Al–Cr system were then established directly from the experimental concentration profiles by using the HitDIC (High-throughput Determination of Interdiffusion Coefficients) software. The reliability of the atomic mobilities was confirmed by the coincidence between the calculated and experimental properties including the composition profiles and diffusion paths. Moreover, based on the atomic mobilities together with the available thermodynamic descriptions, the three-dimensional interdiffusivities planes at 1423–1523 K were constructed, from which the activation energies in γ Ni–Al–Cr alloys were extracted. Lower diffusion activation energy corresponds to higher interdiffusion coefficient. After that, the composition-dependent interdiffusion coefficients in γ′ Ni–Al–Cr alloys were determined and the magnitude relation of D ˜ A l A l N i and D ˜ C r C r N i in γ’ Ni–Al–Cr alloys was verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Influence of bonding variables on transient liquid phase bonding behavior of nickel based superalloy IN-738LC10.1016/j.matdes.2013.05.042 ↗
2. Development of a boron-free filler metal for brazing nickel-based superalloys utilizing the Cu–Mn–Ni system10.1007/s10853-020-04594-7 ↗
3. Evolution and formation mechanism of the interfacial microstructure on diffusion bonded joints of single crystal Ni-based superalloys to Ti3AlC2 ceramic with Ni interlayer10.1016/j.vacuum.2020.110027 ↗
4. Vacuum TLP bonding of Inconel 617 superalloy using Ni-Cr-Si-Fe-B filler metal: metallurgical structure and mechanical properties10.1016/j.vacuum.2018.03.048 ↗
5. Wang · 2019 · 108942
6. Phase field modeling the growth of Ni3Al layer in the β/γ diffusion couple of Ni-Al binary system10.1016/j.intermet.2010.09.012 ↗
7. Atomic mobilities in fcc Ni–rich Ni−X (X=Rh, Ta, W, Re, and Ir) systems10.1016/j.calphad.2019.03.013 ↗
8. Interdiffusion in Ni-rich, Ni-Cr-Al alloys at 1100 and 1200 °C: Part II. Diffusion coefficients and predicted concentration profiles10.1007/BF02647079 ↗
9. Interdiffusion in (fcc) Ni-Cr-X (X = Al, Si, Ge or Pd) alloys at 700 °C, defect diffus
10. Interdiffusion in γ (Face-Centered cubic) Ni-Cr-X (X = Al, Si, Ge or Pd) alloys at 900 °C
11. High-throughput determination of interdiffusivities for Ni-Al-Cr alloys at 1173 K through a combination of diffusion multiple and numerical inverse method, defect diffus
12. Applications of the square root diffusivities to diffusion in Ni-Al-Cr alloys10.1007/BF02646063 ↗
13. Diffusion of cobalt, chromium, and titanium in Ni3Al10.1007/BF02651757 ↗
14. Concentration dependence of ternary interdiffusion coefficients in Ni3Al/Ni3Al–X couples with X = Cr, Fe, Nb and Ti10.1016/S1359-6454(03)00276-3 ↗
15. Diffusion behaviors of Rh, Ta, W, Re, Os and Ir in ternary L12-Ni3Al alloys10.1016/j.intermet.2018.08.005 ↗
16. Site preference and diffusion in Ni3Al alloyed with Ir, Ta or Re at 1200 °C, Defect Diffus
17. Interdiffusion in L12- Ni3Al alloyed with Re10.1007/s11669-009-9499-9 ↗
18. Assessment of diffusional mobilities in face-centered cubic Ni-Cr-Al alloys
19. A pragmatic method to determine the composition-dependent interdiffusivities in ternary systems by using a single diffusion couple10.1016/j.scriptamat.2014.07.016 ↗
20. An augmented numerical inverse method for determining the composition-dependent interdiffusivities in alloy systems by using a single diffusion couple10.1557/mrc.2016.21 ↗
21. Screening of possible Re-substitutional elements in single-crystal Ni-based superalloys: a viewpoint from interdiffusion coefficients in Ni-Al-X ternaries10.1007/s11661-018-4669-1 ↗
22. Determination of accurate interdiffusion coefficients in fcc Ag-In and Ag-Cu-In alloys: a comparative study on the Matano method with distribution function and the numerical inverse method with HitDIC10.1016/j.jallcom.2019.05.224 ↗
23. Deng · 2017 · vol. 56 · 230
24. On sluggish diffusion in fcc Al–Co–Cr–Fe–Ni high-entropy alloys: an experimental and numerical study10.3390/met8010016 ↗
25. HitDIC: a free-accessible code for high-throughput determination of interdiffusion coefficients in single solution phase10.1016/j.calphad.2017.12.004 ↗
26. High-throughput determination of high-quality interdiffusion coefficients in metallic solids: a review10.1007/s10853-020-04805-1 ↗
27. A novel computational framework for establishment of atomic mobility database directly from composition profiles and its uncertainty quantification10.1016/j.jmst.2019.12.038 ↗
28. Diffusion and the Kirkendall shift in binary alloys10.1016/0001-6160(67)90363-X ↗
29. Thermodynamic modeling of Al–Co–Cr, Al–Co–Ni, Co–Cr–Ni ternary systems towards a description for Al–Co–Cr–Ni10.1016/j.calphad.2015.12.007 ↗
30. Models for numerical treatment of multicomponent diffusion in simple phases10.1063/1.351745 ↗
31. Interdiffusion in multiphase, Al-Co-Cr-Ni-Ti diffusion couples10.1007/s11669-004-0112-y ↗
32. Volume interdiffusion coefficient and uncertainty assessment for polycrystalline materials
33. Interdiffusion in the ξ–solid solution of a Ni–Al system10.2320/matertrans1960.21.601 ↗
34. Interdiffusion and its size effect in nickel solid solutions of Ni-Co, Ni-Cr and Ni-Ti systems10.1007/BF00729354 ↗