Characterization of Si–Cu–C–Al quaternary interface of SiC/2A14 joint via counterintuitive laser butt welding
Source abstract
Abstract
Abstract SiCp/Al matrix composites (SiCp/AMCs) have be widely used in the aerospace structural components, space station solar cell structural framework. However, the double bottleneck of poor formability and low tensile strength exists in laser welding SiCp/AMCs. Here, the SiCp/2A14Al joints were prepared via counterintuitive laser butt welding. The Si–Cu–C–Al quaternary system nanometer precipitations were characterized. A new concept of ‘Perforating Laser Welding’ (PLW) was proposed, under which 205 MPa welded joint was successfully prepared. TEM results showed that amorphous Si was embedded in the Al matrix. AlCu was attached to Al4C3 for heterogeneous nucleation-growth. Al4C3 has a tightly bonded interface with Al matrix, which enhances the load transfer capability. This provides a two-level coupling window for SiCp/2xxx Al welded joint design: the ‘Perforating Laser Welding’ concept and the tailoring load transfer interface between AlCu/Al4C3 and Al matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. High-strength SiC joints with a novel in-situ formed SiC/Al4SiC4 joining filler10.1016/j.jeurceramsoc.2020.07.041 ↗
2. Machining of Al/SiC particulate metal-matrix composites Part I: tool performance10.1016/S0924-0136(98)00054-5 ↗
3. Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al-Zn-Mg-Cu composites10.1016/j.msea.2015.07.050 ↗
4. Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys10.1179/174328005X14357 ↗
5. Solute clustering in Al-Cu-Mg alloys during the early stages of elevated temperature ageing10.1016/j.actamat.2010.05.020 ↗
6. Precipitation reactions in Al-4.0Cu0.3Mg (wt.%) alloy10.1016/j.actamat.2007.12.046 ↗
7. Segregation of S precipitates at T/Al interfaces and relevant effects on localized corrosion mechanisms in Al-Cu-Mg alloy10.1016/j.matchar.2020.110571 ↗
8. Ringer · Mater. Sci. Eng., A · 1996 · 217 · 27310.1016/S0921-5093(96)10341-5 ↗
9. Electron beam welding of SiCp/2024 and 2219 aluminium alloy
10. Interfacial characteristics of electron beam welding joints of SiCp/Al composites10.1179/174328409X412005 ↗
11. Mechanism of laser beam welding for SiCp/6063Al compositue
12. Effects of electron beam welding parameters on SiCp/101Al welded joints
13. Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation10.1016/j.msea.2019.138279 ↗
14. The synergistic role of Mn and Zr/Ti in producing θ/L12 co-precipitates in Al-Cu alloys10.1016/j.actamat.2020.05.043 ↗
15. An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys10.1016/j.actamat.2018.09.052 ↗
16. Nanostructure of aluminium alloy 2024: segregation, clustering and precipitation processes10.1016/j.actamat.2010.11.033 ↗
17. On the influence of in situ sound wave superposition on the microstructure of laser welded 7000 aluminum alloys
18. Fibre laser welding of high-alloyed Al-Zn-Mg-Cu alloys10.1016/j.jmatprotec.2016.06.002 ↗
19. Comparative evaluation of residual stresses in vacuum electron beam welded high strength steel S960QL and S960M butt joints10.1016/j.vacuum.2020.109931 ↗
20. Effects of minor Zr addition on the microstructure and mechanical properties of laser welded joint of Al/SiCp metal-matrix composite10.1016/j.jmapro.2019.12.004 ↗
21. Influence of in situ reaction on the microstructure of SiCp/AlSi7Mg welded by Nd:YAG laser with Ti Filler10.1007/s11665-009-9422-x ↗
22. Laser welding mechanism and parameters of aluminum matrix composite SiCw/6061Al
23. High volume fraction SiCp/2024 aluminum matrix composite laser in situ welding joint fracture behavior, ransactions. China. Welding
24. Mechanical properties of laser welded joints of high volume fraction SiCp/Al aluminum matrix composites
25. Effect of Ti-Si-Mg-Al wire on microstructure and mechanical properties of plasma arc in-situ welded joint of SiCp/Al composites10.1016/S1003-6326(11)61175-8 ↗
26. Research on laser welding of aluminum matrix composite SiCw/606110.1016/j.vacuum.2006.01.023 ↗
27. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites10.1016/j.actamat.2016.12.022 ↗
28. Introduction to the interdependence theory of grain formation and its application to aluminium, magnesium and titanium alloys10.4028/www.scientific.net/MSF.690.206 ↗
29. A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys10.1016/j.actamat.2010.12.014 ↗
30. Understanding the refinement of grains in laser surface remelted Al-Cu alloys10.1016/j.scriptamat.2019.12.020 ↗