journal article·2021-01Open access

Impact of Si addition on oxidation resistance of Zr–Si–N nanocomposite films

Dongsen Geng, Ruikai Zeng, Mingcong Rong, Qimin Wang, Haiqing Li, Zhengtao Wu

Vacuum· Volume 183

Abstract

Abstract Incorporating Si element into nitride films is known to enhance mechanical properties and oxidation resistance. Here, we reported the nanocomposite films of Zr–Si–N deposited using a hybrid deposited system combining rf magnetron sputtering from a Si3N4 target with dc magnetron sputtering from Zr target. Microstructure and oxidation resistance of Zr–Si–N nanocomposite films with 0–20.9 at.% Si content were investigated. The results indicated that the binary Zr–N film exhibits a typical columnar structure and the Zr–Si–N films become denser as the elevated Si content. The cross-section of film transforms to a dense and glassy structure when increasing the Si concentrations. The oxide scales of the Zr–Si–N films consist of ZrO2 nanograins and amorphous SiNx tissue. The introduction of the Si element significantly improves the oxidation resistance of the Zr–Si–N films due to the amorphous SiNx tissue phase suppresses both the inward diffusion of the oxygen and cracking in oxide scale caused by the phase transition from t-ZrO2 to m-ZrO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Hard and superhard nanocomposite coatings10.1016/S0257-8972(99)00586-1 ↗
2. Interface phenomena in (super) hard nitride nanocomposites: from coatings to bulk materials10.1039/c2cs15351c ↗
3. Very hard ZrC thin films grown by pulsed laser deposition10.1016/j.jeurceramsoc.2013.01.001 ↗
4. Self-organized anisotropic (Zr1-xSix)Ny nanocomposites grown by reactive sputter deposition10.1016/j.actamat.2014.09.029 ↗
5. Bulk titanium nitride ceramics–Significant enhancement of hardness by silicon nitride addition, nanostructuring and high pressure sintering10.1016/j.jeurceramsoc.2015.04.005 ↗
6. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗
7. Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film10.1016/j.actamat.2015.09.007 ↗
8. Argon · 2008
9. Understanding why the thinnest SiNx interface in transition-metal nitrides is stronger than the ideal bulk crystal10.1103/PhysRevB.81.245418 ↗
10. Properties of Zr–Si–N coatings prepared by RF reactive sputtering10.1016/S0257-8972(00)00914-2 ↗
11. Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV= 80 to ≥ 105 GPa10.1016/S0257-8972(00)00957-9 ↗
12. Advanced TiC/aC: H nanocomposite coatings deposited by magnetron sputtering10.1016/j.jeurceramsoc.2005.06.023 ↗
13. Structural, mechanical and biological comparison of TiC and TiCN nanocomposites films10.1016/j.jeurceramsoc.2012.12.010 ↗
14. Understanding hardness evolution of Zr–Si–N nanocomposite coatings via investigating their deformation behaviors10.1016/j.jeurceramsoc.2016.06.006 ↗
15. The effect of sputtering bias on the composition and microstructure ZrSiN diffusion barrier films, IVESC 2004
16. Synthesis of ZrSiN composite films using a plasma focus device10.1088/1674-1056/23/6/065204 ↗
17. Mechanical property evaluation of ZrSiN films deposited by a hybrid superimposed high power impulse- medium frequency sputtering and RF sputtering system10.1016/j.surfcoat.2018.03.103 ↗
18. Structure and tribological properties of reactively sputtered Zr–Si–N films10.1016/j.tsf.2005.09.062 ↗
19. Investigation of microstructure and properties of magnetron sputtered Zr–Si–N thin films with different Si content10.1016/j.surfcoat.2018.07.106 ↗
20. Silicon influence on corrosion resistance of magnetron sputtered ZrN and ZrSiN thin films10.1080/02670844.2018.1548100 ↗
21. The effect of ZrSiN diffusion barrier on the bonding strength of titanium porcelain10.1016/j.surfcoat.2006.07.023 ↗
22. Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiNx multilayered coatings: a comparative study10.1016/j.surfcoat.2017.08.076 ↗
23. Stabilisation of tetragonal zirconia in oxidised Zr–Si–N nanocomposite coatings10.1016/j.apsusc.2004.01.048 ↗
24. Structure and properties of magnetron sputtered Zr–Si–N films with a high (≥ 25 at.%) Si content10.1016/j.tsf.2004.11.190 ↗
25. Difference in high-temperature oxidation resistance of amorphous Zr–Si–N and W–Si–N films with a high Si content10.1016/j.apsusc.2005.11.038 ↗
26. Thermal stability of magnetron sputtered Zr–Si–N films10.1016/j.surfcoat.2006.07.206 ↗
27. Oxidation resistance and mechanical properties of Zr–Si–N coatings with cyclic gradient concentration10.1016/j.surfcoat.2017.01.063 ↗
28. Influence of microstructure and mechanical properties on the tribological behavior of reactive arc deposited Zr–Si–N coatings at room and high temperature10.1016/j.surfcoat.2016.07.042 ↗
29. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
30. Reliable determination of chemical state in X-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
31. High-resolution X-ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
32. Improving the properties of titanium nitride by incorporation of silicon10.1016/S0257-8972(98)00560-X ↗
33. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
34. Formation of composite ternary nitride thin films by magnetron sputtering co-deposition10.1016/j.surfcoat.2006.08.100 ↗
35. Microstructure and mechanical/thermal properties of Cr–N coatings deposited by reactive unbalanced magnetron sputtering10.1016/S0257-8972(01)01090-8 ↗
36. Zr–Si–N films fabricated using hybrid cathodic arc and chemical vapour deposition: structure vs. properties10.1016/j.surfcoat.2005.01.004 ↗
37. Tetragonal phase stability in ZrO2 film formed on zirconium alloys and its effects on corrosion resistance10.1016/j.actamat.2006.10.030 ↗
38. XPS analysis of aluminum nitride films deposited by plasma source molecular beam epitaxy10.1002/sia.2874 ↗
39. X-ray photoelectron spectroscopy analysis of zirconium nitride-like films prepared on Si(100) substrates by ion beam assisted deposition10.1016/j.surfcoat.2007.11.019 ↗
40. The low temperature catalyzed chemical vapor deposition and characterization of silicon nitride thin films10.1149/1.2069356 ↗
41. Formation of boron nitride thin films on β-Si3N4 whiskers and α-SiC platelets by dip-coating10.1016/S0955-2219(98)00031-4 ↗
42. In situ Raman spectroscopy studies of high-temperature degradation of thermal barrier coatings by molten silicate deposits10.1016/j.scriptamat.2013.12.008 ↗
43. Influence of niobium addition on microstructure, mechanical properties and oxidation resistance of ZrN coatings10.1016/j.tsf.2014.05.019 ↗
44. In situ and ex situ studies of microstructure evolution during high-temperature oxidation of ZrN hard coating10.1016/j.scriptamat.2014.10.024 ↗
45. Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiNx multilayered coatings: a comparative study10.1016/j.surfcoat.2017.08.076 ↗
46. Enhanced capacitive property of HfN film electrode by plasma etching for supercapacitors10.1016/j.matlet.2018.10.032 ↗
47. Sputter-deposited nitrides for oxidation protection in a steam environment at high temperatures10.1016/j.tsf.2019.137439 ↗
48. The influence of the chemical composition of silicon nitride films on their thermal oxidation parameters10.1016/0040-6090(81)90032-8 ↗
49. Thermodynamics and kinetics of oxidation of hot-pressed silicon nitride10.1007/BF00540931 ↗
50. Microstructure effect on the high-temperature oxidation resistance of Ti–Si–N coating layers10.1143/JJAP.42.6556 ↗
51. Oxidation resistance improvement of arc-evaporated TiN hard coatings by silicon addition10.1016/j.surfcoat.2006.08.023 ↗