journal article·2020-04

Effects of cathode operating parameters on the ignition voltage threshold of Hall thrusters

Wen-Bo Li, Hong Li, Yong-Jie Ding, Li-Qiu Wei, Xin-Yong Yang, Hai-Kuo Cai, Jian-Ning Sun, Da-Ren Yu

Vacuum· Volume 174
Publisher page

Abstract

Abstract Changing the operating parameters of a cathode affects the ignition process of a Hall thruster mainly by changing the micro-plasma parameters emitted by the cathode at the moment of ignition. However, the micro-plasma parameter that dominates this effect is not clear. Therefore, the ignition voltage thresholds with different cathode operating parameters were first measured. Then, to better understand how these operating parameters affect the ignition voltage threshold of a Hall thruster, the two-dimensional distribution characteristics of the electron density, electron temperature, and plasma potential in the cathode plume region were measured using a Langmuir probe. The results showed that increasing both the keeper current and mass flow rate of the cathode causes an increase in the electron density emitted by the cathode and a decrease in the electron temperature. It was also found that increasing the cathode mass flow rate has a more pronounced effect than increasing the keeper current. Furthermore, when both the mass flow rate and keeper current of the hollow cathode are increased, the ignition voltage threshold of the Hall thruster decreases significantly. This is mainly because of a significant increase in the electron density resulting from the increases in the mass flow rate and keeper current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Diagnostics and Applications · Plasma Applications and Diagnostics · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Space, the public, and politics10.1016/j.spacepol.2017.01.005 ↗
2. Cubesat mission: from design to operation10.3390/app9153110 ↗
3. Explore space using swarms of tiny satellites10.1038/d41586-018-06957-2 ↗
4. Management analysis for the space industry10.1016/j.spacepol.2017.03.006 ↗
5. An effective surrogate ensemble modeling method for satellite coverage traffic volume prediction10.3390/app9183689 ↗
6. Mars colonization: beyond getting there10.1002/gch2.201800062 ↗
7. A critical history of electric propulsion: the first 50 years (1906-1956)10.2514/1.9245 ↗
8. Electric propulsion for satellites and spacecraft: established technologies and novel approaches10.1088/0963-0252/25/3/033002 ↗
9. Recent progress and perspectives of space electric propulsion systems based on smart nanomaterials10.1038/s41467-017-02269-7 ↗
10. Advanced materials for next-generation spacecraft10.1002/adma.201802201 ↗
11. Data-aided frequency offset estimation for CE-OFDM broadband satellite systems10.3390/app9112310 ↗
12. Space micropropulsion systems for Cubesats and small satellites: from proximate targets to furthermost frontiers10.1063/1.5007734 ↗
13. Study on the peak current of power supply during a Hall thruster start-up10.1016/j.vacuum.2015.10.020 ↗
14. Characteristics of a sheath with secondary electron emission in the double walls of a Hall thruster10.1088/1009-0630/14/9/12 ↗
15. LaB6 hollow cathodes for ion and Hall thrusters10.2514/1.25475 ↗
16. Prospects and physical mechanisms for photonic space propulsion10.1038/s41566-018-0280-7 ↗
17. Hollow cathode simulations with a first-principles model of ion-acoustic anomalous resistivity10.2514/1.B36782 ↗
18. Investigation into the use of cathode flow fraction to mitigate pressure-related facility effects on a magnetically shielded Hall thruster
19. Laboratory tests of 10.5 kW Hall thruster with external layer
20. Accelerated erosion of keeper electrode during coupling discharge between Hall thruster and hollow cathode10.1016/j.vacuum.2019.109040 ↗
21. Operation of a hollow cathode neutralizer for sub-100-W Hall and ion thrusters10.1109/TPS.2017.2779409 ↗
22. Research on beam-focusing characteristics of krypton Hall thruster10.1134/S1063780X19060084 ↗
23. Effect of the hollow cathode heat power on the performance of an Hall-effect thruster10.1088/1009-0630/11/2/12 ↗
24. Cathode effects in cylindrical Hall Thrusters10.1063/1.2999343 ↗
25. Hall thruster-cathode coupling
26. Laboratory model 50 kW Hall thruster
27. Hall thruster cathode flow impact on coupling voltage and cathode life10.2514/1.B34275 ↗
28. Effects of enhanced cathode electron emission on Hall thruster operation10.1063/1.3131282 ↗
29. High-speed camera imaging in the discharge channel during a Hall thruster ignition10.1109/TPS.2018.2808200 ↗
30. Study on electrons conduction paths in Hall thruster ignition processes with the cathode located inside and outside the magnetic separatrix10.1016/j.actaastro.2018.11.027 ↗
31. Simulation of plasma dynamics during discharge ignition in Hall thruster10.1140/epjd/e2019-90666-2 ↗
32. Start-up transient in a Hall thruster10.1002/ctpp.200610078 ↗
33. Investigation of the start transient in a Hall thruster10.1002/ctpp.200810094 ↗
34. CCD images of Hall effect thruster plume dynamics after ultrafast current ignition10.1109/TPS.2005.845363 ↗
35. Fast camera imaging of Hall thruster ignition10.1109/TPS.2011.2121925 ↗
36. Hollow cathode and thruster discharge chamber plasma measurements
37. Model of the plasma potential distribution in the plume of a Hollow cathode
38. Local neutral density and plasma parameter measurements in a Hollow cathode plume
39. Langmuir probe measurements in the discharge channel of a 6-kW Hall thruster
40. Hollow cathode theory and experiment. I. Plasma characterization using fast miniature scanning probes10.1063/1.2135417 ↗
41. Hollow cathode and keeper-region plasma measurements
42. Propagation of ion acoustic wave energy in the plume of a high-current LaB6 hollow cathode10.1103/PhysRevE.96.023208 ↗