journal article·2019-11

Epitaxial CuO thin films prepared on MgAl2O4 (110) by RF-plasma assisted pulsed laser deposition

Xiaohui Liu, Weidong Xu, Meng Xu, Xiaotao Hao, Xianjin Feng

Vacuum· Volume 169
Publisher page

Abstract

Abstract CuO films were deposited on MgAl2O4 (110) substrates by pulsed laser deposition. The structural and optical properties of the films prepared at different oxygen plasma pressures were investigated. The film prepared at 0.2 Pa was pure CuO having the best film crystallinity and an out-of-plane epitaxial relationship of CuO (010)∥MgAl2O4 (110). Two different kinds of domain structure were observed for the 0.2 Pa-deposited sample and the corresponding in-plane epitaxial relationships were deduced to be CuO [10 1 ‾ ]∥MgAl2O4 [001] and CuO [101]∥MgAl2O4 [001]. A schematic diagram was proposed to clarify the growth mechanism. The optical band gap of the as-prepared copper oxide films varied from 1.14 to 1.47 eV. Our study indicates the feasibility of epitaxial growth of monoclinic CuO films on cubic MgAl2O4 substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Characterizing well-ordered CuO nanofibrils synthesized through gas-solid reactions10.1063/1.1690114 ↗
2. Preparation and characterization of copper oxide thin films deposited by filtered cathodic vacuum arc10.1088/0022-3727/37/1/013 ↗
3. A study on the photoelectrochemical properties of copper oxide thin films10.1016/S0360-3199(03)00109-5 ↗
4. Photoelectrochemical properties of copper oxide thin films coated on an n-Si substrate10.1016/S0040-6090(00)01058-0 ↗
5. CuO cathode in lithium cells--II. Reduction mechanism of CuO10.1016/0013-4686(85)87015-8 ↗
6. Mixture behavior and microwave dielectric properties in the low-fired TiO2-CuO system10.1143/JJAP.39.2696 ↗
7. CuO/SnO2 thin film heterostructures as chemical sensors to H2S10.1016/S0925-4005(98)00235-4 ↗
8. Enhanced CO and CO2 gas sensitivity of the CuO/ZnO heterocontact made by quenched CuO ceramics10.1149/1.1838315 ↗
9. A catalytic application of Cu2O and CuO films deposited over fiberglass10.1016/S0169-4332(00)00822-9 ↗
10. Performance, selectivity, and mechanism in Cu-ZSM-5 lean-burn catalysts10.1016/0926-3373(93)80049-J ↗
11. Porous graphite prepared by molybdenum oxide catalyzed gasification as anode material for lithium ion batteries10.1016/j.matlet.2016.04.073 ↗
12. Biosynthesized CuO nano-platelets: physical properties & enhanced thermal conductivity nanofluidics
13. Effects of sputtering pressure on properties of copper oxide thin films prepared by rf magnetron sputtering10.1179/175355511X12941605982226 ↗
14. Property variations of direct-current reactive magnetron sputtered copper oxide thin films deposited at different oxygen partial pressures10.1016/j.tsf.2009.02.079 ↗
15. Effects of oxygen ion energy on the growth of CuO films by molecular beam epitaxy using mass-separated low-energy O+ beams10.1557/JMR.1994.1280 ↗
16. A study of the CuO phase formation during thin film deposition by molecular beam epitaxy10.1016/S0040-6090(97)01203-0 ↗
17. Fabrication of highly ordered metallic nanowire arrays by electrodeposition10.1063/1.1389765 ↗
18. One step room temperature photodeposition of Cu/TiO2 composite films and its conversion to CuO/TiO210.1016/j.tsf.2009.02.024 ↗
19. Fabrication of cuprous and cupric oxide thin films by heat treatment10.1016/j.apsusc.2009.07.072 ↗
20. Optical and structural properties of copper oxide thin films grown by oxidation of metal layers10.1016/j.tsf.2006.06.002 ↗
21. Characterization of CuO(111)/MgO(100) films grown under two different PLD backgrounds10.1016/j.apsusc.2013.02.051 ↗
22. Influence of oxygen pressure on the structural and electrical properties of CuO thin films prepared by pulsed laser deposition10.1016/j.matlet.2016.04.055 ↗
23. Morphological study of PLD grown CuO films on SrTiO3, sapphire, quartz and MgO substrates10.1016/j.apsusc.2012.06.055 ↗
24. Direct production of thermochromic VO2 thin film coatings by pulsed laser ablation10.1016/S0925-3467(99)00104-4 ↗
25. Functional nanostructured oxides10.1016/j.vacuum.2014.12.023 ↗
26. Thermochromic VO2 on Zinnwaldite Mica by pulsed laser deposition10.1016/j.apsusc.2014.07.035 ↗
27. Morphological and crystallographic properties of rare earth oxides coatings deposited by double dual beam-PLD10.1142/S0218625X14500012 ↗
28. Effect of annealing on pulse laser deposition grown copper oxide thin film
29. Contamination control in vacuum systems: venting and pumping10.1016/0042-207X(90)94110-C ↗
30. Hydrocarbon contamination in vacuum dependent scientific instruments10.1016/S0042-207X(78)80029-3 ↗
31. Extremely high vacuum system for long-distance transport10.1016/0042-207X(93)90093-P ↗
32. Non-equilibrium deposition of phase pure Cu2O thin films at reduced growth temperature10.1063/1.4865457 ↗
33. The influence of plasma dynamics on the growth of Sm0.55Nd0.45NiO3 solid solution during pulsed laser deposition10.1016/j.jpcs.2011.07.006 ↗
34. Cu/Cu2O/CuO nanoparticles: novel synthesis by exploding wire technique and extensive characterization10.1016/j.apsusc.2016.09.005 ↗
35. Nonlinear optical properties of laser deposited CuO thin films10.1016/j.tsf.2008.11.139 ↗
36. Controlling preferred orientation and electrical conductivity of zinc oxide thin films by post growth annealing treatment10.1016/j.apsusc.2016.01.160 ↗