journal article·2019-08

Thermomechanical properties and oxidation resistance of Ce–Si alloyed Ti–Al–N thin films

H. Asanuma, F.F. Klimashin, P. Polcik, S. Kolozsvari, H. Riedl, P.H. Mayrhofer

Vacuum· Volume 166
Publisher page

Abstract

Abstract Within this study, we show that single-phase face centered cubic (fcc) Ti0.47Al0.46Ce0.02Si0.05N coatings (sputtered from Ti0.37Al0.57Ce0.02Si0.04 targets plus the addition of Ti) outperform their single-phase fcc Ti0.49Al0.51N counterparts (sputtered from Ti0.40Al0.60 targets plus the same addition of Ti). The deposition rate increases by more than 43% and also the hardness of as-deposited Ti0.47Al0.46Ce0.02Si0.05N coatings is with 39.9 ± 1.2 GPa (on sapphire) 13% higher. Furthermore, this Ce–Si alloyed coating shows a remarkably higher thermal stability, represented by a higher annealing temperature (1200 °C instead of 900 °C) after which hexagonal structured wurtzite-type AlN (w-AlN) can be detected. They also show a more parabolic like oxide growth rate (4.13·10−7 and 1.13·10−5 μm2/s at 850 and 950 °C) during the 10-h-oxidation experiment, whereas that of Ti0.49Al0.51N is close to linear already at 850 °C (especially after ∼2 h). The postponed w-AlN formation guarantees that the hardness of Ti0.47Al0.46Ce0.02Si0.05N is still 40.8 ± 1.6 GPa even after annealing at 1100 °C. Our results clearly demonstrate that the addition of 2 mol% CeSi2 to Ti–Al targets allows to increase the sputter rate and leads to Ce–Si alloyed nitride coatings with improved thermomechanical properties and oxidation resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. On structure and properties of sputtered Ti and Al based hard compound films10.1116/1.573708 ↗
2. Titanium aluminum nitride films: a new alternative to TiN coatings10.1116/1.573713 ↗
3. Effects of aluminum concentration on the oxidation behaviors of reactively sputtered TiAlN films10.1111/j.1151-2916.1999.tb01819.x ↗
4. Characterization of thermally treated TiAlSiN coatings by TEM and nanoindentation10.1016/j.surfcoat.2004.08.060 ↗
5. Formation and diffusion properties of oxide films on metals and on nitride coatings studied with Auger electron spectroscopy and X-ray photoelectron spectroscopy10.1016/0040-6090(90)90216-Z ↗
6. Avoiding the high-temperature decomposition and softening of (Al1−xTix)N coatings by the formation of stable superhard nc-(Al1−xTix)N/a-Si3N4 nanocomposite10.1016/j.msea.2003.08.052 ↗
7. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
8. Physical, structural and mechanical characterization of Ti1−xSixNy films10.1016/S0257-8972(98)00620-3 ↗
9. Some consequences of the partial crystallographic coherence between nanocrystalline domains in Ti–Al–N and Ti–Al–Si–N coatings10.1016/j.tsf.2006.02.092 ↗
10. Increased thermal stability of Ti-Al-N thin films by Ta alloying10.1016/j.surfcoat.2011.07.009 ↗
11. Influence of Nb on the phase stability of Ti–Al–N10.1016/j.scriptamat.2010.06.020 ↗
12. Effect of Hf on structure and age hardening of Ti–Al-N thin films10.1016/j.surfcoat.2011.11.020 ↗
13. Influence of Zr on structure, mechanical and thermal properties of Ti–Al–N10.1016/j.tsf.2011.03.139 ↗
14. Improvement on thermal stability of TiAlSiN coatings deposited by IBAD10.1080/02670844.2017.1341110 ↗
15. Influence of Si content on mechanical and tribological properties of TiAlSiN PVD coatings at elevated temperatures10.1016/j.surfcoat.2017.05.014 ↗
16. Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings10.1016/S0040-6090(01)01348-7 ↗
17. Correlation between microstructure evolution and high temperature properties of TiAlSiN hard coatings with different Si and Al content10.1016/j.apsusc.2014.06.057 ↗
18. Different approaches to superhard coatings and nanocomposites10.1016/j.tsf.2004.10.053 ↗
19. Effect of sputtering target power on microstructure and mechanical properties of nanocomposite nc-TiN y a-SiN x thin films10.1016/S0040-6090(03)01125-8 ↗
20. Architecture of PVD coatings for metalcutting applications: a review10.1016/j.surfcoat.2014.08.068 ↗
21. Fracture toughness of Ti-Si-N thin films10.1016/j.ijrmhm.2017.12.015 ↗
22. Cerium doping of Ti–Al–N coatings for excellent thermal stability and oxidation resistance10.1016/j.surfcoat.2017.07.037 ↗
23. Atom assisted sputtering yield amplification10.1116/1.578049 ↗
24. Phase stability, mechanical properties and thermal stability of Y alloyed Ti–Al–N coatings10.1016/j.surfcoat.2013.07.030 ↗
25. Fischer-Cripps · 2011
26. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. Composition driven phase evolution and mechanical properties of Mo–Cr–N hard coatings10.1063/1.4926734 ↗
28. Critical review of analysis and interpretation of nanoindentation test data10.1016/j.surfcoat.2005.03.018 ↗
29. Ab initio-guided development of super-hard Mo–Al–Cr–N coatings10.1016/j.scriptamat.2017.06.052 ↗
30. TiAlN coatings deposited by triode magnetron sputtering varying the bias voltage10.1016/j.apsusc.2011.02.027 ↗
31. Compositional and structural evolution of sputtered Ti-Al-N10.1016/j.tsf.2009.04.056 ↗
32. Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti–Al–N thin films10.1016/j.tsf.2016.01.039 ↗
33. Structure and properties of Al–Ti–Si–N coatings prepared by the cathodic arc ion plating method for high speed cutting applications10.1016/S0257-8972(01)01391-3 ↗
34. Galileo comes to the surface!
35. Self-organized nanostructures in the Ti–Al–N system10.1063/1.1608464 ↗
36. Energetic balance and kinetics for the decomposition of supersaturated Ti1−xAlxN10.1016/j.actamat.2006.09.045 ↗
37. Decomposition pathways in age hardening of Ti–Al–N films10.1063/1.3610451 ↗
38. Growth of hard amorphous TiAlSiN thin films by cathodic arc evaporation10.1016/j.surfcoat.2013.07.014 ↗
39. Structure and thermal stability of arc evaporated (Ti0.33Al0.67)1 - xSixN thin films10.1016/j.tsf.2008.08.126 ↗
40. Improved thermal stability and oxidation resistance of Al-Ti-N coating by Si addition10.1016/j.tsf.2014.01.072 ↗