Effect of swift heavy ion irradiation in the migration behavior of Xe implanted into TiN
Source abstract
Abstract
Abstract Sintered TiN were implanted with Xe ions of 360 keV to a fluence of 1.1 × 1016 cm−2 at room temperature (RT) and others were co-irradiated with Xe ions of 167 MeV to a fluence of 3.4 × 1014 cm−2 and Xe ions of 360 keV to a fluence of 1.1 × 1016 cm−2 also at RT, successively. Both samples were isochronally annealed at temperatures ranging from 1100 to 1500 °C. Both irradiations caused no amorphization of the sintered TiN, however more defects were retained in the samples implanted with only Xe (360 keV) ions. Annealing of defects retained after irradiations were found to be faster in the co-irradiated samples. The migration behavior of implanted Xe was explained by trapping and de-trapping by defects at temperatures below 1200 °C while at temperatures above 1200 °C, it was dominated by grain boundary diffusion, in the un-irradiated samples. In the co-irradiated samples, Xe migrated via fast grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Billot P and Barbier D “Very high temperature reactor VHTR, the French atomic Agency Commission CEA R&D program,” 2nd Interna- Tional Topical Meeting on High Temperature Reactor Technology, Baijing, China, 22–24 September 2004.
2. 2002
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. Study of the deformation and damage mechanisms of a 9Cr-ODS steel: microstructure evolution and fracture characteristics10.1016/j.msea.2016.01.109 ↗
5. Nitride as nuclear fuel option10.1016/j.jeurceramsoc.2005.03.181 ↗
6. Fabrication of nitride fuels for transmutation of minor actinides10.1016/S0022-3115(03)00163-6 ↗
7. Fuel development for gas-cooled fast reactors10.1016/j.jnucmat.2007.05.013 ↗
8. Mechanical properties of bulk sintered titanium nitride ceramics10.1016/S0921-5093(01)00936-4 ↗
9. Spark plasma sintering of TiN-TiB2 composites10.1016/j.jeurceramsoc.2013.08.034 ↗
10. Consolidation of nano-sized TiN powders by spark plasm a sintering10.1111/j.1551-2916.2006.01066.x ↗
11. Material selection for hard coatings10.1116/1.573700 ↗
12. Properties of bulk δ-TiN1−x prepared by nitrogen diffusion into titanium metal10.1016/0925-8388(92)90016-3 ↗
13. Study of xenon thermal migration in sintered titanium nitride using nuclear micro-probe10.1016/j.nimb.2010.02.018 ↗
14. Field assisted sintered of nano crystalline titanium nitride10.1111/j.1151-2916.2000.tb01369.x ↗
15. Spark plasma-sintering of nano structured titanium carbinitride powders10.1016/j.jeurceramsoc.2004.06.008 ↗
16. Structure and mechanical properties of spark plasma sintered TiN-Based nanocomposites10.2478/v10172-012-0093-5 ↗
17. Sintering behaviour and microstructures of carbides and nitrides for the inert matrix fuel by spark plasma sintering10.1016/j.jnucmat.2006.02.089 ↗
18. Hot pressing of potassium-sodium niobates10.1111/j.1151-2916.1962.tb11127.x ↗
19. Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces10.1016/j.scriptamat.2006.02.034 ↗
20. Fleischer · 1975
21. Effect of Xe ion (167 MeV) irradiation on polycrystalline SiC implanted with Kr and Xe at room temperature10.1088/0022-3727/48/46/465306 ↗
22. Irradiation of titanium, zirconium, and hafnium nitrides with high-energy ions10.1134/S002016851606011X ↗
23. Improved radiation damage tolerance of titanium nitride ceramics by introduction of vacancy defects10.1016/j.jeurceramsoc.2013.10.012 ↗
24. Xenon migration behaviour in titanium nitride10.1016/j.jnucmat.2007.01.239 ↗
25. Xenon behavior in TiN: a coupled XAS/TEM study10.1016/j.jnucmat.2012.10.046 ↗
26. Raman spectra of titanium nitride thin films
27. Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAIN coatings and nanolayered TiN/CrN, TiAIN/CrN multilayer coatings10.1557/JMR.2004.0444 ↗
28. Chemical bonding states and solar selective characteristics of unbalanced magnetron sputtered Ti x M 1−x−y N y films10.1039/C6RA02550A ↗
29. Characterization of TiN, TiC and TiCN coatings on Ti – 50 . 6 at.% Ni alloy deposited by PIII and deposition technique10.1016/j.surfcoat.2006.07.216 ↗
30. Hydrogen evolution reaction in acidic media on single-crystalline titanium nitride nanowires as an efficient non-noble metal electrocatalyst10.1039/C5TA09976E ↗
31. Surface characterisation of plasma-nitrided titanium: an XPS study10.1016/0169-4332(94)00545-1 ↗
32. C 1s peak of adventitious carbon aligns to the vacuum Level : dire consequences for material's bonding assignment by photoelectron spectroscopy
33. Jiao · 2015 · 45
34. SRIM 2010, the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗