journal article·2018-11

Investigation on the hot deformation characteristics of Ni-Cr-Fe-Ti alloy

Bo Li, Yong Du, Zhihong Peng

Vacuum· Volume 157
Publisher page

Abstract

Abstract The hot deformation characteristics of Ni-Cr-Fe-Ti alloy were researched by the isothermal compression tests in temperatures range of 880–1030 °C and strain rates range of 0.01–10s−1. The hot deformation conditions have vital effect on hot deformation behaviors of Ni-Cr-Fe-Ti alloy. Based on experimental study and dynamic materials model (DMM), the processing map of the studied alloy was established. The deformation mechanisms of the studied alloy at various deformation parameters were verified according to microstructure evolution during hot deformation. When the strain is 0.3, a stable domain can be found in the strain rates range of 0.01–0.15s−1 and the temperatures range of 930–1030 °C. A mathematic model was established to research the dynamic recrystallization behavior of Ni-Cr-Fe-Ti alloy. The effects of hot deformation parameters on DRX behavior were studied according to the established dynamic recrystallization kinetics model. The corresponding recrystallization volume fraction, strain and peaks stress were investigated to validate the kinetic models for DRX. There is perfect match between the calculated results and the experimental data. Thus, in view of the analysis above, it can be concluded that the kinetic models can provide accurate prediction of the DRX behavior of Ni-Cr-Fe-Ti alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Microstructural evolution of a delta containing nickel-base superalloy during heat treatment and isothermal forging10.1016/j.msea.2014.10.071 ↗
2. EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy10.1016/j.jallcom.2017.07.027 ↗
3. Effect of heat treatment on microstructure and mechanical properties of laser melting deposited Ni-base superalloy Rene'4110.1016/j.msea.2012.04.037 ↗
4. Modeling and prediction of hot deformation flow curves10.1007/s11661-011-0836-3 ↗
5. Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: a study using process map development10.1016/j.jallcom.2016.10.322 ↗
6. Hot deformation behavior of the Ti6Al4V alloy prepared by powder hot isostatic pressing10.1016/j.jallcom.2017.06.003 ↗
7. Characterization of hot deformation behavior of as-homogenized Al-Cu-Li-Sc-Zr alloy using processing maps10.1016/j.msea.2014.07.031 ↗
8. Mechanical behavior and microstructure evolution during steady-state dynamic recrystallization in the austenitic steel 800H10.1016/j.msea.2008.11.035 ↗
9. Hot deformation behavior of a medium carbon microalloyed steel10.1016/j.msea.2011.01.098 ↗
10. Hot deformation behavior and dynamic recrystallization of melt hydrogenated Ti-6Al-4V alloy10.1016/j.jallcom.2017.09.044 ↗
11. A new critical point on the stress-strain curve: delineation of dynamic recrystallization from grain growth10.1016/j.matdes.2016.12.053 ↗
12. Hot deformation behavior and microstructure analysis of 25Cr3Mo3NiNb steel during hot compression tests10.1016/j.vacuum.2017.10.017 ↗
13. A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure10.1016/j.actamat.2016.12.045 ↗
14. Dynamic softening behavior and microstructural characterization of TiAlbased alloy during hot deformation10.1016/j.matchar.2017.05.022 ↗
15. Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy10.1016/j.jallcom.2017.12.265 ↗
16. 3D processing map and hot deformation behavior of 6A02 aluminum alloy10.1016/j.jallcom.2018.01.299 ↗
17. High temperature deformation of Inconel 71810.1016/j.jmatprotec.2006.04.072 ↗
18. Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression10.1016/j.msea.2018.01.133 ↗
19. A unified physicallybased constitutive model for describing strain hardening effect and dynamic recovery behavior of a Ni-based superalloy
20. Hot workability of PM 8009Al/Al2O3 particle-reinforced composite characterized using processing maps10.1016/j.vacuum.2018.01.001 ↗
21. Determination of critical conditions for dynamic recrystallization of a microalloyed steel10.1016/j.msea.2010.03.086 ↗
22. A physically based constitutive model of As-forged 34CrNiMo6 steel and processing maps for hot working10.1016/j.vacuum.2018.06.022 ↗
23. Study on hot deformation behavior and processing maps of SA508-ІV steel for novel nuclear reactor pressure vessels10.1016/j.vacuum.2018.07.005 ↗
24. Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys10.1016/j.vacuum.2017.12.037 ↗
25. A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy10.1016/j.commatsci.2016.05.016 ↗
26. Recrystallization kinetics within adiabatic shear bands10.1016/S1359-6454(96)00193-0 ↗
27. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: influence of strain rate and temperature10.1016/j.msea.2013.06.037 ↗
28. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
29. Competition between work-hardening effect and dynamic-softening behavior for processing as-cast GH4720Li superalloys with original dendrite microstructure during moderatespeed hot compression10.1016/j.msea.2015.07.007 ↗
30. Dynamic recrystallization kinetics of 42CrMo steel during compression at different temperatures and strain rates10.1016/j.msea.2011.02.090 ↗
31. High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy10.1016/j.msea.2015.03.097 ↗
32. Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel10.1007/s11661-011-1012-5 ↗
33. Competition between dynamic recovery and recrystallzation during hot deformation for TC18 titanium alloy10.1016/j.msea.2015.03.071 ↗
34. Microstructural evolution and constitutive models to predict hot deformation behaviors of a nickel-based superalloy10.1016/j.vacuum.2016.12.022 ↗