Dominant factors to produce single droplet per cycle using drop-on-demand technology driven by pulse electromagnetic force
Source abstract
Abstract
Abstract A nontoxic liquid metal droplets, such as gallium based eutectic alloys, has been used to develop the microelectromechanical systems (MEMS). Therefore, a droplet generator on demand has been proposed to study the formation process of droplet by using pulse electromagnetic force technology. It allows the production of uniform droplet in a controlled way, which entails important technological advantages over existing techniques. The results indicates that, compared with triangular wave and sine wave, the pulse wave can produce single droplet per cycle at a constant amplitude current and higher droplet formation frequency; the process parameters, such as the amplitude, frequency of input current, and electronic pulse width have a significant effect on the droplet formation. This work provides a useful parameter-selection approach for droplets production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Electrowetting and Microfluidic Technologies · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Characterization of nontoxic liquid-metal alloy galinstan for applications in microdevices10.1109/JMEMS.2011.2174421 ↗
2. On the resistivity and surface tension of the eutectic alloy of gallium and indium10.1016/0022-5088(69)90121-0 ↗
3. GaInSn usage in the research laboratory10.1063/1.2930813 ↗
4. Design, development and characterization of MEMS silicon diaphragm force sensor10.1016/j.vacuum.2018.04.029 ↗
5. Reactive getters for MEMS applications10.1016/j.vacuum.2015.10.012 ↗
6. Manipulating liquid metal droplets in microfluidic channels with minimized skin residues toward tunable RF applications10.1109/JMEMS.2014.2381555 ↗
7. Liquid metal actuator for inducing chaotic advection10.1002/adfm.201400689 ↗
8. Influence of water on the interfacial behavior of gallium liquid metal alloys10.1021/am506496u ↗
9. Transfer printing techniques for materials assembly and micro/nanodevice fabrication10.1002/adma.201201386 ↗
10. Printing solder droplets for micro devices packages using pneumatic drop-on-demand (DOD) technique10.1016/j.jmatprotec.2012.05.007 ↗
11. Research on accurate droplet generation for micro-droplet deposition manufacture10.1007/s00170-009-2403-2 ↗
12. Vibrating breakup of jet for uniform metal droplets
13. A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production10.1063/1.1427441 ↗
14. An approach to design and fabrication of a piezo-actuated microdroplet generator10.1007/s00170-013-5371-5 ↗
15. A pneumatic droplet-on-demand generator10.1007/s00348-003-0629-6 ↗
16. Producing molten metal droplets smaller than the nozzle diameter using a pneumatic drop-on-demand generator10.1016/j.expthermflusci.2012.12.006 ↗
17. Producing molten metal droplets with a pneumatic droplet-on-demand generator10.1016/j.jmatprotec.2004.05.016 ↗
18. Drop-on-demand electromagnetic printing of metallic droplets10.1016/j.matlet.2016.11.021 ↗