Impact of potential barrier on electronic resistive switching performance based on Al/TiOx/Al structure
Source abstract
Abstract
Abstract The thickness-dependent electronic bipolar resistive switching (eBRS) behaviors in Al/TiO x /Al (ATA) structure were examined based on the I-V sweep and endurance test. The trap mediated space charge limited conduction was confirmed through the fitting of the I-V curves. The ATA devices showed the different endurance trends and performance with the TiO x thickness. ATA with 80 nm TiO x maintained the longest endurance cycles compared with 50 nm and 110 nm_TiO x . For 110 nm_TiO x , the slope of the trap-filling region increased with RS cycles which differed from other two cases, suggesting the RS is closely related to the electron trapping and detrapping rather than oxygen ion. Overall, the endurance performance based on eBRS was affected by the formation of interfacial layer (IL) of AlO x during TiO x deposition, wherein the IL AlO x increased with increasing TiO x deposition time due to the higher oxidation potential of Al. The IL AlO x plays a role in determining the potential barrier height that adjusts the amount of trapped and detrapped electrons, is presented. In addition, the effect of the potential barrier at the interface of top electrode (TE) on endurance performance was also investigated by inserting a 1 nm_Al.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Ferroelectric and Negative Capacitance Devices · Neuroscience and Neural Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition10.1063/1.2001146 ↗
2. Anode-interface localized filamentary mechanism in resistive switching of TiO2 thin films10.1063/1.2749846 ↗
3. Materials selection for oxide-based resistive random access memories10.1063/1.4903470 ↗
4. Highly-ordered 3D vertical resistive switching memory arrays with ultralow power consumption and ultrahigh density10.1021/acsami.6b05424 ↗
5. Observation of conductance quantization in oxide-based resistive switching memory10.1002/adma.201201506 ↗
6. Research on resistive switching mechanism of multi-filaments formation/rupture in nickel oxide thin films10.1016/j.matlet.2017.04.153 ↗
7. Atomic structure of conducting nanofilaments in TiO2 resistive switching memory10.1038/nnano.2009.456 ↗
8. Oxygen vacancy chain and conductive filament formation in hafnia10.1063/1.4989621 ↗
9. Two-step reset in the resistance switching of the Al/TiOx/Cu structure10.1021/am403498q ↗
10. Metal-oxide RRAM10.1109/JPROC.2012.2190369 ↗
11. Electronic bipolar resistance switching in an anti-serially connected Pt/TiO2/Pt structure for improved reliability10.1088/0957-4484/23/3/035201 ↗
12. Electronic resistance switching in the Al/TiOx/Al structure for forming-free and area-scalable memory10.1039/C4NR06417H ↗
13. Electrically configurable electroforming and bipolar resistive switching in Pt/TiO2/Pt structures10.1088/0957-4484/21/30/305203 ↗
14. Study on the electrical conduction mechanism of bipolar resistive switching TiO2 thin films using impedance spectroscopy10.1063/1.3400222 ↗
15. A detailed understanding of the electronic bipolar resistance switching behavior in Pt/TiO2/Pt structure10.1088/0957-4484/22/25/254010 ↗
16. Role of CMOS back-end metals as active electrodes for resistive switching in ReRAM cells
17. Pulsed DC magnetron sputtering deposition of crystalline photocatalytic titania coatings at elevated process pressures10.1016/j.mssp.2017.07.028 ↗
18. Oxygen vacancies control transition of resistive switching mode in single-crystal TiO2 memory device10.1021/acsami.7b03527 ↗
19. Effects of bottom electrode on resistive switching of silver programmable metallization cells with GdxOy/AlxOy solid electrolytes10.1016/j.vacuum.2016.09.018 ↗
20. Unipolar resistive switching in sol-gel synthesized strontium titanate thin films10.1016/j.vacuum.2018.02.016 ↗
21. Highly flexible resistive switching memory based on the electronic switching mechanism in the Al/TiO2/Al/polyimide structure10.1021/acsami.7b16214 ↗
22. Impact of amorphous titanium oxide film on the device stability of Al/TiO2/Al resistive memory10.1007/s00339-011-6278-3 ↗
23. Identification of a determining parameter for resistive switching of TiO2 thin films10.1063/1.1968416 ↗
24. Variable-angle X-ray photoelectron spectroscopic determination of the thickness of the oxide layer on aluminum metal: an advanced undergraduate laboratory experiment10.1021/ed064p981 ↗