journal article·2018-06

Evolution of pre-oxide layer during subsequent plasma nitriding

Lei Tang, Fei Sun, Xiaoji Miao, Jingcai Li, Jing Hu

Vacuum· Volume 152
Publisher page

Abstract

Abstract Plasma pre-oxidizing was conducted and evolution of the pre-oxide layer during plasma nitriding was primarily investigated. For comparison, plasma oxynitriding was also processed after pre-oxidizing. Scanning electron microscopy, X-ray diffraction and optical microscope were used to analyze the evolution of pre-oxide layer. The results showed that a pre-oxide layer in the form of nanoparticles formed during plasma pre-oxidizing was gradually decomposed in subsequent plasma nitriding process, and it almost disappeared after 1 h. Meanwhile, the decomposition could promote nitrogen atoms diffusing inward, thereby enhance nitriding efficiency. However, the pre-oxide layer could not be decomposed in the subsequent plasma oxynitriding; on the contrary, the oxide layer thickness gradually increased, along with the transformation of Fe3O4 to Fe2O3, which resulted in excessive oxidation and decrease of oxynitriding efficiency. Therefore, the research brought new knowledge to plasma treatment process and of significant guiding effect in real applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Environmental and technical aspects of plasma nitrocarburising10.1016/S0042-207X(00)00250-5 ↗
2. The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel10.1016/j.apsusc.2013.06.152 ↗
3. Comparative study of plasma oxynitriding and plasma nitriding for AISI 4140 steel10.1016/j.jallcom.2016.04.172 ↗
4. Kinetics of microstructure evolution during gaseous thermochemical surface treatment10.1007/s11669-005-0045-0 ↗
5. A rapid D.C. plasma nitriding technology catalyzed by pre-oxidation for AISI4140 steel10.1016/j.matlet.2013.11.033 ↗
6. Characterization and effect of pre-oxidation on D.C. plasma nitriding for AISI4140 steel10.1016/j.vacuum.2014.07.017 ↗
7. Effect of oxide layer on kinetics of nitridation
8. Development of compound layer of iron nitrides during nitriding of steel10.1179/026708403322499218 ↗
9. Influence of oxygen in a plasma nitriding process10.1023/A:1018670001929 ↗
10. The influence of surface microcracks and temperature gradients on the rf plasma nitriding rate10.1016/S0257-8972(01)01524-9 ↗
11. Effect of ion energy and chemistry on layer growth processes during nitriding of CoCr alloys10.1016/j.nimb.2009.01.083 ↗
12. The effect of surface nanocrystallization on plasma nitriding behaviour of AISI 4140 steel10.1016/j.apsusc.2010.08.004 ↗
13. A novel plasma oxynitriding by using plain air for AISI 1045 steel10.1016/j.vacuum.2015.07.012 ↗