Partial melting behaviors and thixoforming properties of cast and extruded Mg-5.15Y-3.75Gd-3.05Zn-0.75Zr alloys
Source abstract
Abstract
Abstract Cast and extruded Mg-5.15Y-3.75Gd-3.05Zn-0.75Zr alloys were selected as starting materials in a series of reheating experiments and thixo-compression tests. Homogenous spherical semisolid slurries were obtained when the reheating temperature and isothermal holding time were 560 °C and 20 s, respectively. However, the different grain sizes and different distributions of eutectic compounds in the starting materials resulted in different morphologies of the semisolid slurries. An innovative model was established to explain the dependency of the semisolid slurry on the morphology of starting material. The thixoforming properties of the semisolid slurry were affected by the forming temperature, strain rate, and its morphology. The dependency of thixoforming properties on the stain rate and morphology of semisolid slurry decreased at higher forming temperature. When the extruded alloy was formed at 560 °C with a strain rate of 0.1/s, a sample with a smooth surface was formed by a lower forming load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Rare earth elements mining investment: it is not all about China10.1016/j.resourpol.2017.05.004 ↗
2. Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) alloy10.1016/j.msea.2011.01.103 ↗
3. The effect of rare earth elements on the behaviour of magnesium-based alloys: Part 2 – recrystallisation and texture development10.1016/j.msea.2012.10.084 ↗
4. On the microstructural factors affecting creep resistance of die-cast Mg–La-rare earth (Nd, Y or Gd) alloys10.1016/j.msea.2016.08.046 ↗
5. Enhanced age hardening response and creep resistance of Mg–Gd alloys containing Zn10.1016/j.scriptamat.2005.07.004 ↗
6. Effect of Ca, RE elements and semi-solid processing on the microstructure and creep properties of AZ91 alloy10.1016/j.msea.2010.10.004 ↗
7. Recrystallisation in the semi-solid state in 7075 aluminum alloy10.1016/j.msea.2008.01.057 ↗
8. Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773K10.1016/j.matdes.2013.03.054 ↗
9. Behavior of metal alloys in the semisolid state10.1007/BF02661090 ↗
10. Mushy/semi-solid metal forming technology – present and future10.1016/S0007-8506(07)61705-3 ↗
11. Structure and properties of a hypoeutectic chromium steel processed in the semisolid state10.1016/j.actamat.2006.02.021 ↗
12. Microstructural evolution during reheating and tensile mechanical properties of thixoforged AZ91D-RE magnesium alloy prepared by squeeze casting–solid extrusion10.1016/j.msea.2012.01.002 ↗
13. Grain refinement in an as-cast AZ61 magnesium alloy processed by multi-axial forging under the multitemperature processing procedure10.1016/j.msea.2012.02.009 ↗
14. Microstructure evolution of SiCp/ZM6 (Mg–Nd–Zn) magnesium matrix composite in the semi-solid state10.1016/j.jallcom.2015.09.135 ↗
15. Microstructural evolution and tensile mechanical properties of thixoforged ZK60-Y magnesium alloys produced by two different routes10.1016/j.matdes.2009.10.056 ↗
16. Compression behavior of AlO/Mg-6Al-0.5Nd-1Gd composites fabricated by pressureless infiltration and semi-solid densification10.1016/j.jallcom.2017.02.102 ↗
17. D.H. Kirkwood, C.M. Sellars, L.G. Eliasboyed, Fine grained metal composition. US Patent (1991) 5,037,498.
18. Microstructural evolution of an ECAE-formed ZK60-RE magnesium alloy in the semi-solid state10.1016/j.msea.2008.12.042 ↗
19. Microstructural evolution during partial melting and semisolid forming behaviors of two hot-rolled Cr–V–Mo tool steels10.1016/j.jmatprotec.2015.05.031 ↗
20. Effects of reheating and subsequent rapid cooling on microstructural evolution and semisolid forming behaviors of extruded Mg–8.20Gd–4.48Y–3.34Zn–0.36Zr alloy10.1016/j.jmatprotec.2017.04.001 ↗
21. Study of the liquid fraction and thermophysical properties of semi-solid steels and application to the simulation of inductive heating for thixoforming
22. Effect of cooling rate on the microstructure evolution and mechanical properties of homogenized Mg–Gd–Y–Zn–Zr alloy10.1016/j.msea.2012.08.112 ↗
23. Microstructures and properties of Mg–7Gd alloy containing Y10.1016/j.jallcom.2006.05.004 ↗
24. On the microstructure formation in chromium steels rapidly cooled from the semisolid state10.1016/j.actamat.2006.09.021 ↗
25. Effect of inverse peritectic reaction on microstructural spheroidization in semi-solid state10.1016/j.jmatprotec.2007.12.106 ↗
26. Microstructural evolution and flow stress of semisolid type 304 stainless steel10.1016/j.jmatprotec.2004.07.063 ↗
27. On the microstructure and properties of 100Cr6 steel processed in the semisolid state10.1016/j.actamat.2007.08.010 ↗
28. Rapid compression of aluminum alloys and its relationship to thixoformability10.1007/s11661-003-0266-y ↗
29. Deformation behavior of steels in mushy state10.1016/S0261-3069(00)00058-3 ↗
30. Investigation into the rapid compression of semi-solid alloy slugs10.1016/S0924-0136(01)00534-9 ↗