journal article·2017-02

Alumina and titania films deposition by APS/ASPPS dual mode thermal spray equipment using Ar added N2 working gas

Yasutaka Ando, Dickson Kindole, Yoshimasa Noda, Richard N. Mbiu, Bernerd K. Kosgey, Stephen M. Maranga, Akira Kobayashi

Vacuum· Volume 136
Publisher page

Abstract

Abstract In order to develop a low cost oxide film deposition process with short duration time, a 1 kW class Atmospheric thermal plasma spray (APS)/Atmospheric solution precursor plasma spray (ASPPS) dual mode thermal spray equipment was manufactured and film depositions of alumina (Al 2 O 3 ) and titania (TiO 2 ) by APS and titania film deposition by ASPPS were carried out. Consequently, though intensive fluctuation with intensive abrasion of electrodes occurred during plasma jet generation in case of N 2 working gas, the plasma jet was stabilized and the abrasion was dramatically diminished by slight addition of Ar to N 2 working gas. Since the suction type feedstock feeder could be confirmed to be available not only for powder feedstock but also solution precursor feed stock. In the case of APS, lamellar structure alumina and titania films could be deposited. However, in the case of titania films deposited by APS, a phase transformation from anatase to rutile occurred partially during film deposition. Also in the case of ASPPS, titania films including rutile and anatase were deposited. From these results, the developed equipment was proved to be available as an APS/ASPPS dual mode thermal spray equipment and this technique was found to have high potential for a low-cost oxide film deposition process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Marine exposure tests of thermal sprayed coatings in Japan
2. Sridhar · Int. J. Mod. Eng. Res. · 2013 · 3 · 1435
3. Thermal conductivity analysis and lifetime testing of suspension plasma-sprayed thermal barrier coatings10.3390/coatings4030630 ↗
4. Thermal-barrier coatings for more efficient gas-turbine engines10.1557/mrs.2012.232 ↗
5. TiO2 photocatalytics: a historical overview and future prospects10.1143/JJAP.44.8269 ↗
6. A low-cost, high-efficiency solar cell base on dye sensitized colloidal TiO2 films10.1038/353737a0 ↗
7. CVD deposited titania thin films for gas sensors with improved operating characteristics10.1002/cvde.201507187 ↗
8. PVD-alumina coatings on cemented carbide cutting tools: a study about the effect on friction and adhesion mechanism”
9. J.Shen “optical constants of crystallized TiO2 coatings prepared by sol-gel process10.3390/ma6072819 ↗
10. Effect of the chelating agent contents on the topography, composition and phase of SPPS-deposited cobalt ferrite splats10.1016/j.surfcoat.2013.05.021 ↗
11. Suspension and solution thermal spray coatings10.1016/j.surfcoat.2009.03.005 ↗
12. Elaboration of porous NiO/8YSZ layers by several SPS and SPPS routes10.1007/s11666-009-9450-y ↗
13. Hybrid plasma-sprayed thermal barrier coatings using powder and solution precursor feedstock10.1007/s11666-014-0075-4 ↗
14. Super high rate thermal plasma CVD of ceramics10.2109/jcersj.97.49 ↗
15. Photo-catalytic TiO2 film deposition by atmospheric TPCVD10.1016/j.vacuum.2006.01.066 ↗
16. Rapid deposition of photo-catalytic oxide film by liquid feedstock injection TPCVD in open air10.1109/TPS.2006.878437 ↗
17. Photocatalytic titanium oxide film deposition by atmospheric TPCVD using air as the working gas10.1109/TPS.2013.2247066 ↗
18. Rapid deposition of titanium oxide and zinc oxide films by solution precursor plasma spray10.1541/ieejfms.130.935 ↗
19. JICA's website
20. “Al2O3 Film Deposition by Atmospheric Thermal Plasma Spray Using 1kW Class Electric Power Source”