Processing and electrochemical characterization of Ni2Si intermetallic compound produced by vacuum sintering
Source abstract
Abstract
Abstract In this study, a powder metallurgy approach for fabrication of Ni2Si intermetallic compound was utilized. In this regard, mechanically activated Ni-33 at.% Si powders were used as feedstock. The powders were investigated by differential scanning calorimetry to study phase transformations that occurred during heating in the calorimeter. It was shown that the milled powders reacted after heating up to 850 °C. In order to fabricate bulk Ni-33 at.% Si, the as-milled powders were cold-pressed and subsequently sintered at 900 °C for 1 h in a vacuum furnace. X-ray diffraction results indicated that the phase composition of sintered materials consisted of only δ-Ni2Si intermetallic. Consolidated samples exhibit 12% porosity and microhardness up to 773 HV0.05. Further investigations showed the corrosion rate of sintered compound is higher than that of Ni–Si alloys reported in the literature. Here, anodic dissolution near the surface pores seems to be corrosion mechanism which resulted in increase in surface porosity up to 27% after corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Connétable · J Alloys Compd · 2011 · 509 · 263910.1016/j.jallcom.2010.10.118 ↗
2. Utlu · Appl Surf Sci · 2010 · 256 · 506910.1016/j.apsusc.2010.03.062 ↗
3. Tam · Mater High Temp · 2009 · 26 · 17710.3184/096034009X464159 ↗
4. Tam · Surf Coat Technol · 2011 · 206 · 26010.1016/j.surfcoat.2011.08.004 ↗
5. Hongxing · J Wuhan Univ Technol Mater Sci Ed · 2009 · 24 · 88310.1007/s11595-009-6883-6 ↗
6. Wang · Surf Coat Technol · 2003 · 168 · 20210.1016/S0257-8972(03)00240-8 ↗
7. Cai · Surf Coat Technol · 2004 · 182 · 29410.1016/j.surfcoat.2003.08.047 ↗
8. Cai · Mater Lett · 2003 · 57 · 291410.1016/S0167-577X(02)01396-4 ↗
9. Datta · J Appl Phys · 2000 · 87 · 839310.1063/1.373553 ↗
10. Datta · Mater Sci Eng A · 2000 · 284 · 21910.1016/S0921-5093(00)00774-7 ↗
11. Lee · Scripta Mater · 2001 · 44 · 9710.1016/S1359-6462(00)00547-9 ↗
12. Lee · Metall Mater Trans A · 2001 · 32 · 80510.1007/s11661-001-1015-8 ↗
13. 1998 · vol. 7
14. Verdian · Vacuum · 2011 · 86 · 9110.1016/j.vacuum.2011.04.022 ↗
15. Suryanarayana · Prog Mater Sci · 2001 · 4610.1016/S0079-6425(99)00010-9 ↗
16. Tam PL. Tailoring of transition metal silicides as protective thin Films on austenitic stainless steel. Ph.D. thesis. Gothenburg, Sweden: Chalmers University of Technology; 2011.
17. Hong-chao · Trans Nonferrous Met Soc China · 2011 · 21 · 55210.1016/S1003-6326(11)60750-4 ↗
18. Hamed · Mater Sci Eng B · 2012 · 177 · 44110.1016/j.mseb.2012.01.016 ↗
19. Morales · Mater Sci Eng A · 2005 · 397 · 110.1016/j.msea.2004.12.049 ↗