Acetylene plasma polymer treated by atmospheric dielectric barrier discharge
Source abstract
Abstract
Abstract Plasma polymer films are very attractive for industrial applications in several sectors such as in the electronic, mechanic, biomedic, coating and others, due to its good adhesion, being insoluble in mild acids and bases and having a high crosslinking structure. This work reports the physical, structural, and surface properties of the polymer obtained from an acetylene plasma polymerization technique and treated by dielectric barrier discharge (DBD). The film was deposited in a reactor supplied by a radio-frequency power source at low pressure. After deposition, the nanofilms were treated in a DBD plasma reactor operating in air. The treatment times varied from 1 to 5 min. The analysis of molecular structure of the samples was investigated by FTIR spectroscopy, showing absorption bands in 3480, 2930, 1720, 1450 and 1380 cm −1 . The water contact-angle was investigated by goniometric technique and presented values from 5 to 65°. The aging effect of these films was also studied. The alteration in the films surface morphology was assessed by an atomic force microscopy (AFM) which indicated that the roughness increased from 60 nm to 160 nm as a result of the DBD treatment. The refractive index of the samples presented values near 1.7, measured by UV–Visible spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Applications and Diagnostics · Surface Modification and Superhydrophobicity · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. d'Agostino · 2008
2. Hippler · 2008
3. Ostrikov · 2008
4. Shul · 2008
5. Du · Surf Coat Technol · 2007 · 201 · 581510.1016/j.surfcoat.2006.10.025 ↗
6. Wang · Surf Coat Technol · 2004 · 186 · 29910.1016/j.surfcoat.2004.02.046 ↗
7. Celini · Polymer · 2007 · 48 · 5810.1016/j.polymer.2006.11.018 ↗
8. Yin · Thin Solid Films · 2009 · 517 · 534310.1016/j.tsf.2009.03.045 ↗
9. Seekamp · J Non Crystall Sol · 2000 · 704 · 266
10. Kraus · Sens Actuat B · 2003 · 88 · 30010.1016/S0925-4005(02)00373-8 ↗
11. Maraescu · Plasma Process Polym · 2008 · 5 · 49
12. Biederman · 2004
13. Santos · Appl Surf Sci · 2013 · 257 · 8810.1016/j.apsusc.2013.01.105 ↗
14. Perrenoud · Mater Res · 2010 · 13 · 9510.1590/S1516-14392010000100019 ↗
15. Yasuda · 1985
16. Ratner · 2012
17. Geyter · Surf Coat Technol · 2007 · 201 · 706610.1016/j.surfcoat.2007.01.008 ↗
18. Kogelschatz · Plasma Chem Plasma Process · 2003 · 23 · 110.1023/A:1022470901385 ↗
19. Kostov · Appl Polym Sci · 2012 · 125 · 412110.1002/app.35290 ↗
20. Yin · Surf Coat Technol · 2009 · 203 · 131010.1016/j.surfcoat.2008.10.035 ↗
21. Durrant · J Appl Phys · 1992 · 71 · 44810.1063/1.350676 ↗
22. Cisneros · Thin Solid Films · 1983 · 100 · 15510.1016/0040-6090(83)90471-6 ↗
23. Mota · Thin Solid Films · 1995 · 270 · 10910.1016/0040-6090(95)06938-0 ↗