Outgassing measurement of an LHC collimator and estimation for the NEG performances
Source abstract
Abstract
Abstract The outgassing rate of the collimators in the Large Hadron Collider (LHC) at CERN has an important role for the life-time of the Non-Evaporable Getter (NEG), and an accurate analysis allows the definition of future activities, like NEG vacuum activation. For these reasons, both, total outgassing rate and gas composition of a secondary collimator have been measured in the laboratory. The outgassing rate decreases by about two orders of magnitude by after bake-out and moreover, repeated bake-out further reduced the outgassing rate. The gas transmission through the NEG coated beam pipes and the resulting pressure distributions near the collimator were also measured in a dedicated setup. It is found that the main gas component after just 2 m of NEG coated beam pipe is CH 4 due to the extreme pumping speed of NEG for the other gases. Large amount of outgassing for H 2 and carbon related molecules are released when moving the collimator jaws. It is found that the NEG is very effective even in such case with large gas load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Particle Detector Development and Performance · Superconducting Materials and Applications · Particle Accelerators and Free-Electron Lasers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. Ti–Zr–V non-evaporable getter films: from development to large scale production for the Large Hadron Collider10.1016/j.tsf.2005.12.218 ↗
2. Benvenuti · Vacuum · 2003 · 71 · 30710.1016/S0042-207X(02)00755-8 ↗
3. Bregliozzi · 2008
4. Assmann · 2006