journal article·2022-01

Microstructure design and strengthening of mechanical properties in Al–Si alloy through 0.05 wt % Ni-base amorphous alloy

H.L. Peng, Z.Q. Luo, Z.F. Wang, X. Chen, L.Y. Shan

Vacuum· Volume 195
Publisher page

Abstract

Abstract In this work, it was found that nanocrystals (NiTi) can be formed in Ni-base amorphous alloys at a certain temperature. Lattice matching calculations indicated that NiTi matched perfectly with α-Al and Si. In solid-liquid transformation, NiTi nanocrystals promoted heterogeneous nucleation of α-Al, meanwhile hindered the growth of α-Al and Si. After the manipulation, the α-Al and eutectic Si were refined by 87.0% and 27.7%, respectively. The quantity of primary Si went down. The average size of Al2Cu and Mg2Si was with the significant refinement levels of 57.7% and 90.6%, respectively. Based on the comprehensively optimized microstructure configuration, the yield strength (σy), ultimate tensile strength (σU), elongation (δ) and fracture strain (e) at room temperature were increased by 17.8%, 17.8%, 100.4% and 73.3%, respectively, after the manipulation. The manipulated σy and σU were increased by 21.5% and 14.4%, respectively. The improvement mechanisms of mechanical properties were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Effects of annealing on microstructure and mechanical properties of rapidly solidified Cu-3 wt% Ag-1 wt% Zr10.1016/j.msea.2018.10.062 ↗
2. Contributions to high temperature strengthening from three types of heat-resistant phases formed during solidification, solution treatment and ageing treatment of Al-Cu-Mn-Ni alloys respectively10.1016/j.msea.2019.138819 ↗
3. In situ nanocrystals manipulate solidification behavior and microstructures of hypereutectic Al-Si alloys by Zr-based amorphous alloys10.1016/j.jmrt.2020.02.091 ↗
4. In-situ X-radiographic study of nucleation and growth behaviour of primary silicon particles during solidification of a hypereutectic Al-Si alloy10.1016/j.jallcom.2020.154948 ↗
5. Formation mechanism of gradient structure of aluminum matrix composite under static magnetic field during directional solidification10.1016/j.jmrt.2020.02.072 ↗
6. Effects of cold rolling and low-temperature annealing on microstructure and mechanical properties of rapidly solidified Cu–3Ag-0.5Zr alloy10.1016/j.msea.2019.138829 ↗
7. Transformation of cerium-containing inclusions in ultra-low-carbon aluminum-killed steels during solidification and cooling10.1016/j.jmrt.2020.05.077 ↗
8. Microstructure refinement and strengthening of Al–Cu alloys manipulated by nanocrystalline phases formed by in situ crystallization of Ni–Nb–Ti metallic glasses in melt10.1016/j.jmrt.2020.02.077 ↗
9. Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles10.1016/j.msea.2019.138488 ↗
10. The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al–3.8wt.%Cu–(Cr) alloys10.1016/j.jmrt.2020.04.054 ↗
11. Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles10.1111/jace.17699 ↗
12. Zhang LC, Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution10.1016/j.compositesb.2021.108912 ↗
13. Microstructure refinement and strengthening mechanisms of bimodal-sized and dual-phased (TiCn-Al3Tim)/Al hybrid composites assisted ultrasonic vibration10.1016/j.jallcom.2019.02.315 ↗
14. Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles10.1016/j.msea.2021.141485 ↗
15. Application of nanoparticles in cast steel: an overview10.1007/s41230-020-0037-z ↗
16. Effect of La content on microstructure, thermal conductivity and mechanical properties of Mg-4Al magnesium alloys10.1016/j.jallcom.2019.07.267 ↗
17. Effect of cooling rate on the thermal and electrical conductivities of an A356 sand cast alloy10.1016/j.jallcom.2019.151756 ↗
18. Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application10.1016/j.corsci.2019.108195 ↗
19. Aluminum with dispersed nanoparticles by laser additive manufacturing10.1038/s41467-019-12047-2 ↗
20. Microstructure and properties of as-cast Al-4.5Cu-1.5Mg alloy refined with Ti-supported TiC nanoparticles via ultrasonic-assisted addition10.1016/j.msea.2019.138271 ↗
21. Liquid state property, structural evolution and mechanical behavior of Ti-Fe alloy solidified under electrostatic levitation condition10.1016/j.matdes.2018.08.043 ↗
22. Investigation of the influences of ternary Mg addition on the solidification microstructure and mechanical properties of as-cast Al–10Si alloys10.1016/j.msea.2020.140247 ↗
23. Compression properties and work-hardening behavior of the NiAl matrix composite reinforced with in situ TaC ceramic particulates10.1016/j.vacuum.2020.110035 ↗
24. Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy10.1016/j.matdes.2021.109743 ↗
25. Relation between thermal effect and phase transformation of aluminium matrix surface composite adding Al-based amorphous fabricated by FSP10.1016/j.vacuum.2016.06.002 ↗
26. Effect of cobalt addition on the microstructural evolution, thermal stability and magnetic properties of Fe-based amorphous alloys10.1016/j.vacuum.2019.108911 ↗
27. Effects of hydrogen implantation on the magnetocaloric properties of amorphous FeZr films10.1016/j.vacuum.2021.110063 ↗
28. Fe78Si9B13 amorphous alloys for the decolorization process of azo dye aqueous solutions with different initial concentrations at different reaction temperatures10.1016/j.vacuum.2020.109301 ↗
29. Structural and mechanical properties of amorphous Si–C-based thin films deposited by pulsed magnetron sputtering under different sputtering powers10.1016/j.vacuum.2021.110319 ↗
30. Grain refinement behavior of Al-Cu alloys inoculated by various metallic glasses10.1016/j.matchemphys.2015.11.003 ↗
31. Crystallization kinetics of an Au-based metallic glass upon ultrafast heating and cooling10.1016/j.scriptamat.2017.02.001 ↗
32. Multiscale design of α-Al, eutectic silicon and Mg2Si phases in Al-Si-Mg alloy manipulated by in situ nanosized crystals10.1016/j.msea.2020.140627 ↗
33. Crystallization kinetics and spark plasma sintering of amorphous Ni53Nb20Ti10Zr8Co6Ta3 powders prepared by mechanical alloying10.1016/j.vacuum.2015.01.002 ↗
34. Tensile properties and work-hardening behaviours of Al–Cu alloys modified by Al84Ni10La6 metallic glass10.1080/13640461.2015.1106785 ↗
35. Superior strength and ductility of the Al–Cu alloys inoculated by Zr-based metallic glass at elevated temperatures10.1016/j.msea.2015.08.013 ↗
36. A new approach to refine grains in Al alloys10.1002/adem.201400318 ↗
37. Age hardening and mechanical properties of cast Al-Cu alloy modified by La and Pr10.1002/adem.201400178 ↗
38. Effects of Cu, Zn, W and Mo on the compression properties of in-situ nano-Ti5Si3/TiAl composite10.1142/S0217979219400514 ↗
39. Strengthening mechanism of TiC/Al composites using Al-Ti-C/CNTs with doping alloying elements (Mg, Zn and Cu)10.1016/j.jmrt.2020.04.033 ↗
40. Microstructural and performance characterization of in-situ biphasic micro-nano scale (TiB2-TiCx)/Al-Cu-Mg composites with different ceramic and metal ratios designed for compact integration10.1016/j.jmrt.2020.01.079 ↗
41. Effects of alloying elements on the phase constitution and microstructure of in situ SiC/Al composites10.1142/S0217979219400484 ↗
42. ASTM E 1019. Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys [S].
43. ASTM E 1409. Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique ([S]).
44. GB/T 11261-2006. Steel and Lron—Determination of Oxygen Content—The Pulse Heating Inert Gas Fusion-Infra-Red Absorption Method [S].
45. ISO 17053:2005. Steel and Iron—Determination of Oxygen—Infrared Method after Fusion under Inert Gas [S].
46. The influence of CaO addition on grain refinement of cast magnesium alloys10.1016/j.scriptamat.2015.12.015 ↗
47. Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation10.1016/j.compositesb.2021.109265 ↗
48. Comparison of the effects of Mg and Zn on the interface mismatch and compression properties of 50 vol% TiB2/Al composites10.1016/j.ceramint.2021.04.234 ↗
49. Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: experiment and first-principle calculation10.1016/j.matdes.2019.107951 ↗
50. Simultaneously improved strength and toughness of in situ bi-phased TiB2–Ti(C,N)–Ni cermets by Mo addition10.1016/j.jallcom.2019.153068 ↗
51. Application of the thermodynamic extremal principle to phase-field modeling of near-equilibrium solidification in multi-component alloys10.1016/j.actamat.2017.02.026 ↗
52. Estimation of the shifting distance of the eutectic point in hypereutectic Al–Si alloys by the lever rule10.1016/j.scriptamat.2006.11.023 ↗
53. Microstructure evolution and enhanced mechanical properties of eutectic Al–Si die cast alloy by combined alloying Mg and La10.1016/j.matdes.2015.10.078 ↗
54. Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al–Si–Mg alloy10.1016/j.msea.2014.02.053 ↗
55. Eutectic Al-Si-Cu-Fe-Mn alloys with enhanced mechanical properties at room and elevated temperature10.1016/j.matdes.2011.04.005 ↗
56. Effects of neodymium addition on microstructure and mechanical properties of near-eutectic Al–12Si alloys10.1016/S1003-6326(15)64035-3 ↗
57. Two quite different primary Mn-rich phases in Al-Si-Cu-Mn heat-resistant alloy and its effect to mechanical properties10.1016/j.msea.2018.05.100 ↗
58. Development of high performance near eutectic Al-Si-Mg alloy profile by micro alloying with Ti10.1016/j.jallcom.2015.11.083 ↗
59. Improved mechanical properties of near-eutectic Al-Si piston alloy through ultrasonic melt treatment10.1016/j.msea.2016.05.087 ↗
60. Effect of Sc microalloying addition on microstructure and mechanical properties of as-cast Al–12Si alloy10.1016/j.msea.2019.138343 ↗
61. Microstructure evolution and mechanical properties of Al/Al–12%Si multilayer processed by accumulative roll bonding (ARB)10.1016/j.msea.2015.08.064 ↗
62. The influence of Al–10Sr or/and Al–5Ti–1B on microstructure and mechanical properties of Al–12Si–4Cu–2Ni–0.8 Mg alloys10.1016/j.jallcom.2019.151856 ↗
63. Effect of transition elements on the microstructure and tensile properties of Al-12Si alloy cast under ultrasonic melt treatment10.1016/j.jallcom.2017.04.084 ↗
64. Effect of texture evolution on mechanical properties of near eutectic Al–Si–Mg alloy with minor addition of Zr/V during hot extrusion10.1016/j.matdes.2013.12.068 ↗
65. On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al–Si–Mg alloy10.1016/j.matdes.2010.12.012 ↗
66. Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu10.1016/j.msea.2010.08.058 ↗
67. Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength10.1016/j.msea.2017.10.049 ↗
68. Microstructural characteristics, mechanical properties, fracture analysis and corrosion behavior of hypereutectic Al–13.5Si alloy10.1007/s40962-019-00315-2 ↗
69. Microstructure and elevated temperature mechanical properties of a direct-chill cast AA4032 alloy with copper and erbium additions10.1016/j.jallcom.2018.12.195 ↗
70. The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys10.1016/j.msea.2017.03.084 ↗
71. Tensile properties of an Al–11 mass%Si alloy at high temperatures processed by rotary-die equal-channel angular pressing10.1016/j.msea.2005.07.064 ↗
72. Elevated temperature mechanical properties and fracture behaviors of the bond zone of aluminum matrix composites (Al-12Si/ABOw) with Al-12Si alloys10.1016/j.msea.2017.05.116 ↗
73. Microstructure manipulation and strengthening mechanisms of 40Cr steel via trace TiC nanoparticles10.1016/j.msea.2021.141693 ↗
74. Microstructure evolution and mechanical property enhancement of high-Cr hot work die steel manipulated by trace amounts of nano-sized TiC
75. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys10.1016/j.actamat.2019.04.017 ↗
76. Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures10.1016/j.scriptamat.2019.07.015 ↗
77. Ultrastrong nanocrystalline stainless steel and its Hall-Petch relationship in the nanoscale10.1016/j.scriptamat.2018.06.014 ↗
78. Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles10.1016/j.msea.2020.139081 ↗
79. Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration
80. Fabrication and characterization of in situ synthesized SiC/Al composites by combustion synthesis and hot press consolidation method10.1155/2017/9314740 ↗
81. Wetting of graphite by molten Cu–xSn–yCr ternary alloys at 1373 K10.1016/j.carbon.2019.12.097 ↗
82. A facile electron microscopy method for measuring precipitate volume fractions in AlCuMg alloys10.1016/j.matchar.2012.04.009 ↗
83. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
84. Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties10.1016/j.compositesb.2021.108605 ↗
85. Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation10.1016/j.matdes.2019.107945 ↗
86. Efficient microstructure refinement of Al–Si–Mg alloy manipulated by nanocrystals formed by in-situ crystallization in melt10.1016/j.msea.2019.02.072 ↗
87. A statistical distribution function of wide applicability10.1115/1.4010337 ↗