Diffusion and mechanical properties of Ti2AlNb and TA15 interface: From experiments to molecular dynamics
Source abstract
Abstract
Abstract The experiments and molecular dynamics simulations were employed to further understand the morphology evolution and failure mechanism of the TA15/Ti2AlNb interface. The results show that the asymmetric diffusions, caused by the difference of the diffusion coefficient and crystal structure, have played a significant role in the microstructure and mechanical properties. The diffusivity of Ti elements from TA15 was much better than those Nb and Al from Ti2AlNb base alloy owing to its higher diffusion coefficient. The macro joints are brittle fractures near the TA15 base zone, and excessive holding time will reduce the tensile strength and plasticity of the joint while increasing the temperature can enhance the strength and plasticity due to the promotion of diffusion and improvement of the microstructure. However, the nano joints are ductile failures owing to size effects. Time has little effect on the mechanical properties of nano joint, while an increase in temperature could improve the strength and plasticity. The combination of MD simulations and experiments provides new approaches for the study of deformation mechanisms and microstructure evolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Advanced superplastic forming and diffusion bonding of titanium alloy10.1179/174328406X83932 ↗
2. E.D. Weisert, J.R. Fischer, W.L. Mccauley, Superplastic Forming Diffusion Bonding Process, USA Patent Number 4882823 1989.
3. Numerical simulation and technical study on superplastic forming/diffusion bonding for multi-sheet structure of Ti2AINb alloy10.3901/JME.2015.12.043 ↗
4. Development of Ti(2)AlNb alloys: opportunities and challenges
5. Application of superplastic forming and diffusion bonding in the aerospace industry10.4028/www.scientific.net/MSF.475-479.3037 ↗
6. Examination of superplastic forming combined with diffusion bonding for titanium: perspective from experience10.1361/10599490421574 ↗
7. Applications of superplastic forming and diffusion bonding to hollow engine blades10.1016/S0924-0136(99)00377-5 ↗
8. Advances in fabricating superplastically formed and diffusion bonded components for aerospace structures10.1361/10599490421286 ↗
9. The structural design and superplastic forming/diffusion bonding of Ti2AlNb based alloy for four-layer structure10.1016/j.matdes.2016.05.046 ↗
10. Diffusion bonding of Ti2AlNb alloy and high-Nb-containing TiAl alloy: interfacial microstructure and mechanical properties10.3390/met8121061 ↗
11. Vacuum diffusion bonding TC4 to Ni80Cr20: interfacial microstructure, segregation, cracking and properties10.1016/j.vacuum.2018.10.001 ↗
12. Microstructure evolution and mechanical properties of diffusion bonding high Nb containing TiAl alloy to Ti2AlNb alloy10.1016/j.vacuum.2019.03.010 ↗
13. Solid diffusion bonding of Ti2AINb·based alloy
14. Diffusion bonding of TA15 and Ti2AlNb alloys: interfacial microstructure and mechanical properties10.1007/s11665-017-2555-4 ↗
15. Diffusion in the Ti–Al system10.1016/S1359-6454(99)00400-0 ↗
16. Investigating microstructural evolution at the interface of friction stir weld and diffusion bond of Al and Mg alloys10.1016/j.jmrt.2019.06.049 ↗
17. Molecular dynamics study on transport properties of supercritical working fluids: literature review and case study10.1016/j.apenergy.2019.04.156 ↗
18. Effects of various conditions in cold-welding of copper nanowires: a molecular dynamics study10.1063/1.5004050 ↗
19. Large-scale molecular dynamics simulations of TiN/TiN(001) epitaxial film growth10.1116/1.4953404 ↗
20. Effects of incident n atom kinetic energy on tin/tin(001) film growth dynamics: a molecular dynamics investigation10.1063/1.4972963 ↗
21. Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al10.1016/j.actamat.2006.12.040 ↗
22. Molecular dynamics simulations of the melting curve of NiAl alloy under pressure
23. Composition dependence of diffusion and thermotransport in Ni-Al melts: a step towards molecular dynamics assisted databases10.1016/j.actamat.2017.06.056 ↗
24. Molecular dynamics simulation of linear friction welding between dissimilar Ti-based alloys10.1016/j.commatsci.2013.11.013 ↗
25. Temperature effect on the diffusion welding process and mechanism of B2-O interface in the Ti2AlNb-based alloy: a molecular dynamics simulation10.1016/j.vacuum.2019.109118 ↗
26. Hcp-bcc structural phase transformation of titanium: analytic model calculations10.1103/PhysRevB.70.184122 ↗
27. Molecular dynamics simulations of the characteristics of Mo/Ti interfaces10.1016/j.commatsci.2017.09.039 ↗
28. Electronic structure, phase stability, and cohesive properties of Ti2XAl (X=Nb, V, Zr)10.1103/PhysRevB.60.15683 ↗
29. A new ordered orthorhombic phase in a Ti3Al-Nb alloy10.1016/0001-6160(88)90141-1 ↗
30. Interatomic potentials in ternary Nb-Ti-Al alloys10.1088/0965-0393/4/1/004 ↗
31. Dislocation core structure in the B2 phase of Nb-40%Ti-15%Al, Comput
32. Atomistic simulations of fracture in the B2 phase of the Nb–Ti–Al system10.1016/S0921-5093(98)00513-9 ↗
33. Dynamics of Ti, N, and TiNx (x = 1–3) admolecule transport on TiN(001) surfaces10.1103/PhysRevB.86.155443 ↗
34. Ti and N adatom descent pathways to the terrace from atop two-dimensional TiN/TiN(001) islands10.1016/j.tsf.2014.02.053 ↗
35. Effects of surface vibrations on interlayer mass transport: ab initio molecular dynamics investigation of Ti adatom descent pathways and rates from TiN/TiN (001) islands10.1103/PhysRevB.97.035406 ↗
36. Boundary condition effects on the dynamic and electric properties of hydration layers10.1021/jp511824t ↗
37. Molecular dynamics simulation of TiN (001) thin films under indentation10.1016/j.ceramint.2015.07.027 ↗
38. Micro-mechanism of the effect of grain size and temperature on the mechanical properties of polycrystalline TiAl10.1016/j.commatsci.2018.10.019 ↗
39. Canonical dynamics: equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
40. Constant-pressure equations of motion10.1103/PhysRevA.34.2499 ↗
41. The virial theorem and stress calculation in molecular dynamics10.1063/1.437577 ↗
42. Deformation mechanisms in nanotwinned metal nanopillars10.1038/nnano.2012.116 ↗
43. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
44. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
45. Room-temperature and high-temperature tensile mechanical properties of TA15 titanium alloy and TiB whisker-reinforced TA15 matrix composites fabricated by vacuum hot-pressing sintering10.3390/ma10040424 ↗
46. Effects of strain state and slip mode on the texture evolution of a near-α TA15 titanium alloy during hot deformation based on crystal plasticity method10.1016/j.jmst.2019.11.038 ↗
47. Effect of composition of the mechanical properties of newly developed Ti2AlNb-based titanium aluminide10.1016/j.intermet.2004.12.003 ↗
48. Mixing and fast chemical reaction-V: influence of diffusion within the reaction zone on selectivity10.1016/0009-2509(82)85069-0 ↗
49. Fretting fatigue behavior of combined plasma zirconiuming and shot peening on Ti6Al4V alloy10.1142/S0218625X18502116 ↗
50. Interdiffusion cross crystal-amorphous interface: an atomistic simulation10.1016/j.actamat.2016.04.032 ↗
51. Highly choreographed atomic motion and mechanism of interface amorphization10.1016/j.actamat.2016.11.055 ↗
52. Molecular dynamics modeling of diffusion bonding10.1016/j.scriptamat.2005.02.004 ↗
53. Modeling and investigation for atomic diffusion and mechanical properties of TiAl/Ti3Al interface: temperature effect10.1007/s00339-020-03678-0 ↗
54. Elastic and thermodynamic properties of the Ti2AlNb orthorhombic phase from first‐principles calculations10.1002/pssb.201600634 ↗
55. Texture evolution and deformation - induced amorphization in high pressure torsion of W [J]10.1016/j.mtcomm.2020.101178 ↗
56. Amorphization by solid‐state reaction of crystalline aluminum and platinum multilayers prepared by cold rolling [J]10.1063/1.345540 ↗
57. Structural regulation with atomic-level precision: from single-atomic site to diatomic and atomic interface catalysis10.1016/j.matt.2019.11.014 ↗
58. Robust structural identification via polyhedral template matching10.1088/0965-0393/24/5/055007 ↗
59. Diffusion of Ti 44 and V 48 in titanium10.1016/0001-6160(64)90075-6 ↗
60. Adsorption and diffusion of oxygen on metal surfaces studied by first-principle study: a review10.1016/j.jmst.2020.04.063 ↗
61. Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale[J]10.1016/j.tafmec.2010.03.007 ↗
62. Defects production and mechanical properties of typical metal engineering materials under neutron irradiation10.1007/s11431-015-5910-4 ↗