Mechanical properties of tempered vacuum glazing with continuous vacant support pillars
Source abstract
Abstract
Abstract Aiming at the problem of uneven distribution of surface stress and deformation in tempered vacuum glazing (TVG) caused by vacant support pillars, which would easily cause glass surface damage and affect product safety and service life. This paper established the mechanical model of TVG and studied the mechanical properties of TVG with continuous vacant support pillars (CVSP). The maximum surface stress (σmax) and deformation of 1.2 m by 0.8 m double evacuated glazing with 5 mm thick tempered glass panes with no more than 4 CVSP (0.3 mm height, 0.6 mm diameter and 50 mm spacing cylindrical stainless steel support pillars) in different areas and arrangement were obtained by ANSYS. The simulation results showed that the mechanical properties of TVG were worse with the increase of the number of CVSP. Under the condition of other factors being the same, the mechanical properties of TVG were the worst with CVSP in the middle, and were the best with CVSP arranged in linear. Based on the rule of simulation results, the license definition conditions of TVG with CVSP were formed. Meanwhile, some samples of TVG with CVSP were made, and the σmax was measured by the stress analyzer. The results showed that the relative error between the measured and simulated values of σmax was −4.25%–3.66%, the simulation results were reliable, and the license definition conditions of TVG with CVSP were valid.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Urban Heat Island Mitigation · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Evacuated glazing[J]10.1016/0038-092X(91)90060-A ↗
2. Transparent evacuated insulation[J]10.1016/0038-092X(92)90106-K ↗
3. Varshneya. Chemical strengthening of glass: lessons learned and yet to be learned[J]
4. Heat Conduction through the support pillars in vacuum glazing[J]10.1016/S0038-092X(98)00079-6 ↗
5. Current status of the science and technology of vacuum glazing[J]10.1016/S0038-092X(98)00007-3 ↗
6. Tang · 2018
7. Influence of chemical treatment on microstructure and mechanical properties of chemically-toughened glass by ion exchange process[J]10.1016/j.jnoncrysol.2018.04.059 ↗
8. Laser glass frit sealing for encapsulation of vacuum insulation glasses[J]10.1016/j.phpro.2014.08.075 ↗
9. Novel hybrid vacuum/triple glazing units with pressure equalisation design[J]10.1016/j.conbuildmat.2014.10.013 ↗
10. Pillar-supported vacuum insulation panel with multi-layered filler material[J]10.1016/j.ijheatmasstransfer.2016.06.032 ↗
11. Getters for vacuum insulated glazing[J]10.1016/j.vacuum.2018.06.012 ↗
12. The influence of low-temperature surface induction on evacuation, pump-out hole sealing and thermal performance of composite edge-sealed vacuum insulated glazing[J]10.1016/j.renene.2018.12.025 ↗
13. Design and development of lead-free glass-metallic vacuum materials for the construction and thermal performance of smart fusion edge-sealed vacuum glazing[J]10.1016/j.enbuild.2020.110430 ↗
14. Finite element analysis of heat transfer performance of vacuum glazing with low-emittance coatings by using ANSYS[J]10.1016/j.enbuild.2019.109584 ↗
15. Support point arrangement of tempered vacuum glass[J]
16. Reliability analysis of toughened vacuum glass based on gray relation decision[J]
17. Evacuated glazing with tempered glass[J]10.1016/j.solener.2019.03.021 ↗
18. Current status of the science and technology of vacuum glazing [J]10.1016/S0038-092X(98)00007-3 ↗
19. Experimental validation of a numerical model for heat transfer in vacuum glazing [J]10.1016/j.solener.2005.04.002 ↗
20. Effect of glass thickness on the thermal performance of evacuated glazing [J]10.1016/j.solener.2006.05.004 ↗
21. Thermal performance analysis of an electrochromic vacuum glazing with low emittance coatings [J]10.1016/j.solener.2009.02.007 ↗
22. Heat transfer and stress distribution in the central part of vacuum glazing [J]10.1016/j.applthermaleng.2019.113926 ↗
23. Standardization Administration of China · 2005
24. Standardization Administration of China · 2020