journal article·2021-05

Facile preparation of high-performance spinel LiMn2-xCuxO4 cathodes by microwave-induced solution flameless combustion

Ruifang Chen, Bixia Wen, Hong Li, Mingwu Xiang, Changwei Su, Junming Guo, Wei Bai, Zhaoyao Sa

Vacuum· Volume 187
Publisher page

Abstract

Abstract A series of LiMn2-xCuxO4 (0 ≤ x ≤ 0.1) cathode materials were synthesized via a rapid microwave-induced solution flameless combustion technique, and the structure, morphology and electrochemical performances of the LiMn2-xCuxO4 samples were investigated in detail. All the as-prepared samples are the single crystal materials with a high crystallinity and correspond to the well-defined spinel structure. The spinel structure stability is effectively improved by the appropriate Cu-doping that is conducive to increasing the average valence of Mn and reducing lattice parameter. Consequently, the optimized LiMn1.925Cu0.075O4 sample delivers a first discharge specific capacity of 108.5 mAh g−1 at 1 C and achieves the long-term charge/discharge cycle of 1000 cycles. At high current rate of 5 C and 10 C after 1000 cycles, the capacity retention of over 61% can be maintained. Even at the elevated temperature of 55 °C, the high initial capacity of 111.4 mAh g−1 and capacity retention of 63.91% are also delivered after 100 cycles at 1 C. This is ascribed to the favorable Li+ diffusion kinetics, low charge transfer resistance and apparent activation energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Facile synthesis of highly porous Ni-Sn intermetallic microcages with excellent electrochemical performance for lithium and sodium storage10.1021/nl5028606 ↗
2. High performance LiMn2O4 cathode materials grown with epitaxial layered nanostructure for Li-ion batteries10.1021/nl404430e ↗
3. Synthesis and performance of Li[(Ni1/3Co1/3Mn1/3)(1-x)Mgx]O2 prepared from spent lithium ion batteries10.1016/j.jhazmat.2012.12.028 ↗
4. Synthesis of spherical Al-Doping LiMn2O4 via a high-pressure spray-drying method as cathode materials for lithium-ion batteries
5. Effect of Ni and Cu substitution on the crystal structure, morphology and electrochemical performance of spinel LiMn2O4
6. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
7. Electrochemical and electronic charge transport properties of Ni-doped LiMn2O4 spinel obtained from polyol-mediated synthesis10.3390/ma11050806 ↗
8. New molten salt synthesis of LiNi0.5Mn1.5O4 cathode material10.1088/2053-1591/aad160 ↗
9. Polyol synthesis of nanoparticles: status and options regarding metals, oxides, chalcogenides, and non-metal elements10.1039/C5GC00943J ↗
10. Spinel cathodes for advanced lithium ion batteries: a review of challenges and recent progress10.1080/10667857.2016.1208957 ↗
11. Electrochemical properties of spinel LiMn2O4 cathode material prepared by a microwave-induced solution flameless combustion method10.1016/j.vacuum.2019.03.011 ↗
12. Jahn-Teller structural phase transition around 280K in LiMn2O410.1016/0025-5408(95)00048-8 ↗
13. Role of disproportionation in the dissolution of Mn from lithium manganate spinel
14. Synthesis and electrochemical characterizations of spinel LiMn1.94MO4 (M = Mn0.06, Mg0.06, Si0.06, (Mg0.03Si0.03)) compounds as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2015.02.049 ↗
15. Oxygen loss and surface degradation during electrochemical cycling of lithium-ion battery cathode material LiMn2O4
16. Strategies for improving the cyclability and thermo-stability of LiMn2O4-based batteries at elevated temperatures10.1039/C4TA06264G ↗
17. Solution-combustion synthesized nickel-substituted spinel cathode materials (LiNixMn2-xO4 0 ≤ x ≤ 0.2) for lithium ion battery: enhancing energy storage, capacity retention, and lithium ion transport10.1016/j.electacta.2013.11.080 ↗
18. Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries10.1016/j.jpowsour.2016.03.070 ↗
19. Sol-Gel synthesis using novel chelating agent and electrochemical characterization of binary doped LiMn2O4 spinel as cathode material for lithium pechargeable batteries10.4236/wjnse.2016.61001 ↗
20. Electronic, structural, and electrochemical properties of LiNixCuyMn2-x-yO4 (0 < x < 0.5, 0 < y < 0.5) high-voltage spinel materials10.1021/cm200042z ↗
21. Electronic and bonding properties of LiMn2O4 spinel with different surface orientations and doping elements and their effects on manganese dissolution10.1149/2.0991607jes ↗
22. Electrochemical properties of nanocrystalline LiMn2-xCuxO4 (x = 0.2-0.6) particles prepared by ultrasonic spray pyrolysis method10.1016/j.matchemphys.2012.07.003 ↗
23. Synthesis and characterization of copper substituted lithium manganate spinels10.1007/s10854-007-9376-4 ↗
24. Effect of bication (Cu-Cr) substitution on the structure and electrochemical performance of LiMn2O4 spinel cathodes at low and high current rates10.1016/j.jscs.2017.07.011 ↗
25. LiNixCu0.5-xMn1.5O4 spinels electrodes, superior high - potential cathode material for Li batteries10.1149/1.1391699 ↗
26. Preparation of LiMn2O4 nanorods and nanoparticles for lithium-ion battery applications, Mater
27. Preliminary study of dysprosium doped LiMn2O4 spinel cathode materials
28. Structural transition in Mg-doped LiMn2O4: a comparison with other M-doped Li-Mn spinels10.1016/S0038-1098(02)00769-X ↗
29. Effect of Al-doping on the electrochemical properties of a three-dimensionally porous lithium manganese oxide for lithium-ion batteries10.1016/j.electacta.2012.04.136 ↗
30. Cation and anion Co-doping synergy to improve structural stability of Li- and Mn-rich layered cathode materials for lithium-ion batteries10.1016/j.nanoen.2018.12.049 ↗
31. High-rate and long-life performance of a truncated spinel cathode material with off-stoichiometric composition at elevated temperature10.1016/j.electacta.2016.12.096 ↗
32. Changes in the local structure of LiMgyNi0.5-yMn1.5O4 electrode materials during lithium extraction10.1021/cm035369c ↗
33. Compromising science by ignorant instrument calibration-need to revisit half a century of published XPS data10.1002/anie.201916000 ↗
34. C 1s Peak of adventitious carbon aligns to the vacuum Level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
35. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
36. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
37. Comprehensive X-ray photoelectron spectroscopy study of the conversion reaction mechanism of CuO in lithiated thin film electrodes10.1021/jp3119633 ↗
38. Heterostructured Cu2O/CuO decorated with nickel as a highly efficient photocathode for photoelectrochemical water reduction10.1039/C5TA01961C ↗
39. Investigation of Cu doped flake-NiO as an anode material for lithium ion batteries10.1039/C9RA05618A ↗
40. Improving the fast discharge performance of high-voltage LiNi0.5Mn1.5O4 spinel by Cu2+, Al3+, Ti4+ tri-doping10.1016/j.jallcom.2016.03.256 ↗
41. Synthesis and electrochemical characterization of multi-cations doped spinel LiMn2O4 used for lithium ion batteries10.1016/j.jpowsour.2011.09.062 ↗
42. The effect of solid electrolyte interface formation conditions on the aging performance of Li-ion cells10.1007/s10008-010-1219-1 ↗
43. High electrochemical stability Al-doped spinel LiMn2O4 cathode material for Li-ion batteries10.1016/j.est.2019.101036 ↗
44. Lithium-ion transfer at cathode-electrolyte interface in diluted electrolytes using electrochemical impedance spectroscopy [J]10.1002/celc.202000173 ↗
45. Electrochemical evaluation of LiAl0.05Ni0.05Mn1.9O4 cathode material synthesized via electrospinning method10.1016/j.jallcom.2015.01.163 ↗
46. Rapid synthesis of high-cycling performance LiMgxMn2-xO4 (x ≤ 0.20) cathode materials by a low-temperature solid-state combustion method, Electrochim
47. Facile synthesis of porous LiMn2O4 spheres as positive electrode for high-power lithium ion batteries10.1016/j.jpowsour.2011.09.100 ↗
48. A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries10.1021/nl303619s ↗
49. Significant effects of electron transport on the electrochemical properties of Ni2+- and Al3+- doped LiMn2O410.1149/1.3541055 ↗
50. Surface-orientation for boosting the high-rate and cyclability of spinel LiNi0.02Mn1.98O4 cathode material10.1016/j.vacuum.2020.109505 ↗
51. Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage10.1039/C4TA06522K ↗