journal article·2020-09

Influence of BCl3/NH3 flow ratio on growth and microstructure of CVI-processed boron nitride interfacial coatings

Jianwei Dai, Yiguang Wang, Zhenhua Xu, Rende Mu, Limin He

Vacuum· Volume 179
Publisher page

Abstract

Abstract Chemical vapor infiltration (CVI) is usually utilized to deposit hexagonal boron nitride (h-BN) interfacial coatings with layered microstructure. The deposition rate of BN coating increased with the increase of ammonia flow, indicating that the nucleation occurs on the surface of fibers rather than the gaseous phase. However, when ammonia flow is increased from 3.0 L min−1 to 7.5 L min−1, the deposition rate exhibits an increase of only 30%, which implies that the deposition of BN coatings is controlled by the boron deposition. Furthermore, the coating samples, prepared with ammonia flow of 3.0–4.2 L min−1, exhibits a relatively smooth surface, whereas the flow rates of 5.4 and 7.5 L min−1 result in strumae with a diameter of >4 μm. The smooth coatings demonstrate a near-stoichiometric ratio of boron and nitrogen, and render excellent thermal stability from room temperature to 1300 °C in argon and air. Moreover, the chemical composition of strumae-containing coatings is far from the desired stoichiometry and both coatings contain a lower amount of hexagonal phase, which can be ascribed to the lower thermal stability in the presence of oxygen and water vapors. The present study provides useful insights into the influence of CVI process parameters on the quality of BN coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Design, preformation and application of thermostructural composites (TSC) like C/C, C/SiC and SiC/SiC composites10.1002/adem.200290001 ↗
2. Failure of plasma sprayed nano‐zirconia‐based thermal barrier coatings exposed to molten CaO–MgO–Al2O3–SiO2 deposits10.1111/jace.16498 ↗
3. Oxidation-resistant carbon-fiber-reinforced ceramic-matrix composites10.1016/S0266-3538(98)00146-8 ↗
4. CVD-coated boron nitride on continuous silicon carbide fibres: structure and nanocomposition10.1016/S0955-2219(00)00062-5 ↗
5. Niedenzu · 1965
6. 1972
7. Preparation of polymer-derived graphene-like carbon-silicon carbide nanocomposites as electromagnetic interference shielding material for high temperature applications10.1016/j.jallcom.2017.03.080 ↗
8. Effect of temperature on the microstructure of boron nitride formed in situ on chemical vapor-deposited boron in ammonia gas10.1111/j.1551-2916.2010.04386.x ↗
9. Synthesis of boron nitride coatings on quartz fibers: thickness control and mechanism research
10. Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process10.1016/j.jeurceramsoc.2012.02.009 ↗
11. Preparation and properties of unidirectional boron nitride fibre reinforced boron nitride matrix composites via precursor infiltration and pyrolysis route10.1016/j.msea.2011.07.066 ↗
12. Carbon fibre-reinforced magnesium: improvement of bending strength by nanodesign of boron nitride interlayers10.1016/j.matchemphys.2007.02.086 ↗
13. On a thermodynamic approach to the chemical phenomena involved in the formation of a BN interphase by CVD/CVI from a BF3-NH3 precursor10.1016/0925-8388(91)90027-S ↗
14. Effects of the single layer CVD BN interface on mechanical properties of oxide-oxide composites fabricated by a sol-gel process10.1016/j.ceramint.2013.12.067 ↗
15. A comprehensive investigation on CVD growth thermokinetics of h-BN white graphene10.1088/2053-1583/3/3/035007 ↗
16. The interphase and interface microstructure and chemistry of isothermal/isobaric chemical vapour infiltration SiC/BN/SiC composites: TEM and electron energy loss studies10.1023/A:1018633603920 ↗
17. Microstructural and microtextural investigations of boron nitride deposited from BCl3-NH3-H2 gas mixtures10.1016/S0955-2219(03)00126-2 ↗
18. Flow-tube investigation of the high-temperature reaction between BCl3 and NH310.1021/jp981846g ↗
19. Investigation of the BN films prepared by low pressure chemical vapor deposition10.1016/S0257-8972(99)00306-0 ↗
20. Processing conditions for boron nitride coatings in fiber bundles via chemical vapor deposition10.1111/j.1151-2916.1994.tb04552.x ↗
21. Flow-tube investigation of the high-temperature reaction between BCl3 and NH310.1021/jp981846g ↗
22. Effect of precursor purity and flow rate on the CVD growth of hexagonal boron nitride10.1016/j.jallcom.2016.07.117 ↗
23. Calculations of electron inelastic mean free paths. IX. Data for 41 elemental solids over the 50 eV to 30 keV range10.1002/sia.3522 ↗
24. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
25. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
26. XPS study of BN thin films deposited by CVD on SiC plane substrates10.1002/sia.740160191 ↗
27. Microstructural and optical properties of BN films deposited by inductively coupled plasma CVD10.1016/j.vacuum.2008.03.081 ↗
28. Formation of boron nitride thin films on β-Si3N4 whiskers and α-SiC platelets by dip-coating10.1016/S0955-2219(98)00031-4 ↗
29. Large scale growth and characterization of atomic hexagonal boron nitride layers10.1021/nl1022139 ↗
30. Edge diffusion during growth: the kink Ehrlich-Schwoebel effect and resulting instabilities10.1103/PhysRevLett.82.3661 ↗