Operational behaviour of the inductively-heated plasma generator IPG6-B for scientific applications
Source abstract
Abstract
Abstract The inductively-heated plasma generator IPG6-B has been established at Baylor University as an experimental facility and plasma wind tunnel for multiple scientific applications including research in (aerospace) engineering, astrophysics, complex (dusty) plasmas and materials science. Within this work, the wide range of operational parameters provided the facility is presented. A pitot probe and a calorimeter were designed and qualified to measure generator efficiency, plasma enthalpy and Mach number as well as resistance and reactance of the plasma for various power levels and volume flows. Sub- and supersonic flow conditions for Mach numbers between M a = 0.3 − 1.4 have been characterized for air, Argon, Helium and Nitrogen. Overall power coupling efficiency as well as specific bulk enthalpy of the flow have been determined by calorimeter measurements to be between η = 0.05 − 0.45 and h s = 5 − 35 MJ kg−1 respectively depending on gas type and pressure. The characterization has shown a wide range of reproducible plasma conditions that can be produced by the facility. As such, the results of this work enable planning and design of future experiments and assessment of future improvements of the facility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Dust and Plasma Wave Phenomena · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Electrical conductivity of the thermal dusty plasma under the conditions of a hybrid plasma environment simulation facility10.1088/1367-2630/17/5/053041 ↗
2. A new inductively driven plasma generator (IPG6) - setup and initial experiments10.1109/TPS.2012.2237524 ↗
3. Analysis of magnetic field plasma interactions using microparticles as probes
4. Operational behavior of inductively heated plasma source IPG3 for entry simulations10.2514/2.6698 ↗
5. System analysis and test-bed for an atmosphere-breathing electric propulsion system using an inductive plasma thruster10.1016/j.actaastro.2018.03.031 ↗
6. Concept for an experimental study of dust rim formation on chondrules
7. S. Anih, A. S. Pagan, H. Koch, P. Martinez, R. Laufer, G. Herdrich, Waste for Energy and Volume Recovery (WEVR) Using Inductively Heated Plasma Generator, (Washington, D.C., USA).
8. Characterization of an induvtively generated plasma for carbon dioxide reduction in environmental applications
9. Dusty plasmas10.1070/PU2004v047n05ABEH001689 ↗
10. Diffusion theory of the electrodeless ring discharge10.1063/1.1702549 ↗
11. A simple analysis of an inductive RF discharge10.1088/0963-0252/1/3/006 ↗
12. Low-frequency, high-density, inductively coupled plasma sources: operation and applications10.1063/1.1343887 ↗
13. Inductively heated plasma sources for technical applications10.1016/j.vacuum.2006.01.044 ↗
14. High-enthalpy, water-cooled and thin-walled ICP sources characterization and MHD optimization10.1017/S0022377807006927 ↗
15. Experimental methodology to assess atomic recombination on high-temperature materials10.2514/1.T5132 ↗
16. F. Romano, G. Herdrich, S. Fasoulas, T. Schönherr, Performance evaluation of a novel inductive atmosphere-breathing EP system, in: 35th International Electric Propulsion Conference, Atlanta, Georgia, USA.
17. Operational envelope of the low power plasma facilities at the university of Kentucky
18. Optical diagnostics on equilibrium and non-equilibrium low power plasmas
19. Fundamental description of spectrochemical inductively coupled plasmas. Plenary lecture10.1039/ja9961100623 ↗
20. Electrical characteristics and electron heating mechanism of an inductively coupled argon discharge10.1088/0963-0252/3/2/007 ↗
21. Mass spectrometric and Langmuir probe measurements in inductively coupled plasmas in Ar, CHF3/Ar and CHF3/Ar/O2mixtures10.1088/0963-0252/10/2/309 ↗
22. Plasma diagnostics in large area plasma processing system10.1116/1.1359554 ↗
23. Plasma flow reactor for steady state monitoring of physical and chemical processes at high temperatures10.1063/1.5001346 ↗
24. Magnetic induction and plasma impedance in a cylindrical inductive discharge10.1088/0963-0252/6/4/012 ↗
25. On the validity of neutral gas temperature by N2rovibrational spectroscopy in low-pressure inductively coupled plasmas10.1088/0963-0252/20/3/035016 ↗
26. J. Schmidt, R. Laufer, G. Herdrich, T. W. Hyde, Electrostatic probe measurements in the inductively-heated plasma generator IPG6-B, in: Proceedings of the 7th Russian-German Conference on Electric Propulsion, Leipzig, Germany.
27. On the probabilistic particle simulation of an arcjet flow expansion10.1016/j.vacuum.2012.04.047 ↗
28. Liepmann · 2001
29. Similarity between the heat transfer to a model in an underexpanded dissociated-air jet of a high-frequency plasmatron and to a sphere in a high-velocity flow in the terrestrial atmosphere10.1134/S0015462816030121 ↗