journal article·2020-05

Pore structure and compression behavior of porous TiAl alloys by freeze casting

Q.B. Wang, Z.P. Hou, S.Z. Zhang, H. Feng, C.J. Zhang, J.C. Han, W.G. Zhang, R.T. Zhao

Vacuum· Volume 175
Publisher page

Abstract

Abstract In this work, lamellar-like and spherical-like porous TiAl alloys have been fabricated by freeze casting using different slurries, and their compression behaviors have been investigated also. The lamellar-like porous alloy with a relative density of 0.34 exhibits a good homogeneous lamellar porous structure after removing unidirectional ice dendrites. The noticeable pores on the lamellar surface are attributed to the dehydrogenation of TiH2 and Kirkendall effect. Besides, the spherical-like porous alloy with a relative density of 0.24 exhibits uniform and well-defined spherical-like architecture. Compression tests show that the spherical-like porous alloy has better compression property than the lamellar-like porous alloy. The peak compression stress of the lamellar-like porous alloy reaches 60 MPa, whereas the stress fluctuated greatly with the increase of strain. Nevertheless, the spherical-like porous alloy shows a steady compression plateau stress of approximately 46 MPa and absorption energy per unit volume of 27.6 × 106 J/m3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Nanoporous metals and alloys · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Fabrication of Ti-Al micro/nanometer-sized porous alloys through the kirkendall effect10.1002/adma.200602398 ↗
2. Multifunctionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
3. On the origin of superior high strength of Ti-45Al-10Nb alloys10.1016/S0966-9795(02)00008-0 ↗
4. The mechanical properties of different lamellae and domains in PST-TiAl investigated with nanoindentations and atomic force microscopy10.1016/S0921-5093(01)01561-1 ↗
5. Corrosion behavior of intermetallic compound of TiAl-5Nb in molten LiCl-Li2O10.1016/j.matlet.2005.02.015 ↗
6. Porous TiAl alloys fabricated by sintering of TiH2 and Al powder mixtures10.1016/j.jallcom.2015.09.259 ↗
7. Nb-Al diffusion reaction in high Nb containing TiAl porous alloys10.1179/1743284714Y.0000000725 ↗
8. Compressive properties of porous Ti-Al alloys fabricated by reaction synthesis using a space holder powder10.1016/j.msea.2017.05.015 ↗
9. Preparation and properties of porous Ti-Al alloys by reactive infiltration10.1179/003258909X12502679013855 ↗
10. Mechanical properties of directionally freeze-cast titanium foams10.1016/j.actamat.2010.09.019 ↗
11. Ice-templated porous alumina structures10.1016/j.actamat.2006.11.003 ↗
12. Dynamic freeze casting for the production of porous titanium (Ti) scaffolds10.1016/j.msec.2012.08.004 ↗
13. Rapid dehydrogenation of TiH2 and its effect on formationmechanism of TiC during self-propagation high-temperature synthesis from TiH2-Csystem10.1016/j.powtec.2013.08.020 ↗
14. Formation of hollow nanocrystals through the nanoscale kirkendall effect10.1126/science.1096566 ↗
15. Pore structure and gas permeability of high Nb-containing TiAl porous alloys by elemental powder metallurgy for microfiltration application10.1016/j.intermet.2012.07.022 ↗
16. Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering10.1016/j.scriptamat.2007.11.006 ↗
17. Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route10.1016/j.matdes.2013.01.005 ↗
18. Processing titanium foams using tapioca starch as a space holder, Processing titanium foams using tapioca starch as a space holder10.1016/j.jmatprotec.2011.08.008 ↗
19. Steel foam for structures: a review of applications, manufacturing and material properties10.1016/j.jcsr.2011.10.028 ↗