journal article·2020-02

Preparation and SERS properties of petaloid Ag nanostructures induced by regular spontaneous stress distribution

Jing Wu, Shi Chen, Jinghuai Fang, Xihua Yang

Vacuum· Volume 172
Publisher page

Abstract

Abstract Regular patterned nanostructures are of great importance in functional micro-nano electronic devices and sensing detection. Here, a simple strategy was promoted for fabricating petaloid Ag nanostructures based on Flexible substrate/Metal film (FM) system. The results show that when the interface stress is unsteady, the hexagonal porous on PDMS surface will form regular curvilinear boundary condition to generate uniform interfacial compression stress distribution on the interface of FM system, thus inducing orderly two-dimensional patterns. In this paper, the prepared petaloid Ag nanostructures with small Ag nanoparticles on each petal exhibited sensitive and reliable SERS performance. This simple and feasible method may be beneficial for studying the effect of curve boundary conditions on designing abundant ordered patterns.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gold and Silver Nanoparticles Synthesis and Applications · Nanomaterials and Printing Technologies · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Surface-enhanced Raman spectroscopy for bioanalysis: reliability and challenges10.1021/acs.chemrev.7b00668 ↗
2. Amphiphilic functionalized acupuncture needle as SERS sensor for in situ multiphase detection10.1021/acs.analchem.7b04348 ↗
3. Mechanically self-assembled, three-dimensional graphene-gold hybrid nanostructures for advanced nanoplasmonic sensors10.1021/acs.nanolett.5b03672 ↗
4. Synthesis, functionalization, and nanomedical applications of functional magnetic nanoparticles10.1016/j.cclet.2018.08.007 ↗
5. Highly luminescence manganese doped carbon dots10.1016/j.cclet.2019.01.014 ↗
6. Stimuli-responsive bio-based polymeric systems and their applications10.1039/C8TB02491J ↗
7. Gas-shearing fabrication of multicompartmental microspheres: a one-step and oil-free approach10.1002/advs.201802342 ↗
8. Broadband single molecule SERS detection designed by warped optical spaces10.1038/s41467-018-07869-5 ↗
9. Confining cation injection to enhance CBRAM performance by nanopore graphene layer10.1002/smll.201603948 ↗
10. Volume-enhanced Raman scattering detection of viruses10.1002/smll.201805516 ↗
11. Scalable high‐performance nanolaminated SERS substrates based on multistack vertically oriented plasmonic nanogaps10.1002/admt.201800689 ↗
12. Multi-layer nanoarrays sandwiched by anodized aluminium oxide membranes: an approach to an inexpensive, reproducible, highly sensitive SERS substrate10.1039/C8NR05875J ↗
13. Injection-molded microfluidic device for SERS sensing using embedded Au-capped polymer nanocones10.1021/acsami.8b13424 ↗
14. Prosperity to challenges: recent approaches in SERS substrate fabrication10.1515/revac-2016-0027 ↗
15. Extreme nanophotonics from ultrathin metallic gaps10.1038/s41563-019-0290-y ↗
16. Sub‐5 nm metal nanogaps: physical properties, fabrication methods, and device applications10.1002/smll.201804177 ↗
17. Skin electronics from scalable fabrication of an intrinsically stretchable transistor array10.1038/nature25494 ↗
18. Regular arrays of highly ordered ferroelectric polymer nanostructures for non-volatile low-voltage memories10.1038/nmat2339 ↗
19. Sub-10 nm imprint lithography and applications10.1116/1.589752 ↗
20. Stable, flexible, and high-performance SERS chip enabled by a ternary film-packaged plasmonic nanoparticle array10.1021/acsami.9b09746 ↗
21. Multiple nanostructures based on anodized aluminium oxide templates10.1038/nnano.2016.257 ↗
22. Facile transferring of wafer-scale ultrathin alumina membranes onto substrates for nanostructure patterning10.1021/acsnano.5b03789 ↗
23. Nano-imprinted ferroelectric polymer nanodot arrays for high density data storage10.1002/adfm.201203042 ↗
24. Anodized Aluminum oxide/polydimethylsiloxane hybrid mold for roll-to-roll nanoimprinting10.1002/adfm.201800197 ↗
25. Sensitive and reliable SERS substrates based on hierarchical nanoparticle arrays fabricated by confined spheroidization10.1002/ppsc.201900268 ↗
26. SERS amplification by ultra-dense plasmonic arrays on self-organized PDMS templates10.1016/j.apsusc.2018.02.163 ↗
27. Micro-EDM method to fabricate three-dimensional surface textures used as SERS-active substrate10.1016/j.apsusc.2018.07.132 ↗
28. The influence of plasma treatment on the elasticity of the in situ oxidized gradient layer in PDMS: towards crack-free wrinkling10.1039/C8SM01910J ↗
29. Heterogeneous, three-dimensional texturing of graphene10.1021/nl504612y ↗
30. Wave interactions in buckling: self-organization of a metal surface on a structured polymer layer10.1063/1.1756194 ↗
31. Coupling of wrinkle patterns to microsphere-array lithographic patterns10.1039/b503127c ↗
32. Simple fabrication of ring-like microwrinkle patterns10.1016/j.colsurfa.2005.11.016 ↗
33. Highly oriented tunable wrinkling in polymer bilayer films confined with a soft mold induced by water vapor10.1063/1.2431647 ↗
34. Controlling the morphology of gold films on poly(dimethylsiloxane)10.1021/am1002537 ↗
35. Fabrication of thioflavin-T-modified nanopillared SERS substrates for ultrasensitive beta-amyloid peptide detection10.1002/jrs.5376 ↗
36. A high-performance and low cost SERS substrate of plasmonic nanopillars on plastic film fabricated by nanoimprint lithography with AAO template10.1063/1.4985270 ↗
37. Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer10.1038/30193 ↗