journal article·2020-02Open access

A novel vacuum pressure sensor using a thermoelectric device

Braulio Beltrán-Pitarch, Jorge García-Cañadas

Vacuum· Volume 172

Abstract

Abstract We present the proof-of-concept of a new vacuum pressure sensor based on a new operating principle. The new sensor is formed by the simple combination of a thermoelectric (TE) module that is contacted at both sides by a bent copper plate. The vacuum pressure is related to the change in the thermal contact resistance that exists between the outer ceramic surfaces of the TE module and the copper plate, since heat transfer through the ceramic/copper interface is found to be influenced by the amount of air present in the interface gaps (vacuum pressure). The variations of the thermal contact resistance produce a change of the TE module voltage when a fixed current is applied to it. By monitoring this voltage simultaneously to the response of a commercial pressure sensor at different vacuum pressures inside a vacuum chamber, a calibration equation was identified, which enables obtaining the vacuum pressure from the voltage signal. Random errors lower than 10% were found in the 0.1–250 mbar range, which is the pressure range that the sensor can properly sense. This new device is inexpensive, simple to fabricate and integrate, and benefits from the high stability of TE modules.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Recent development and application of thermoelectric generator and cooler10.1016/j.apenergy.2014.12.075 ↗
2. Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects10.1016/j.enconman.2016.01.065 ↗
3. Measurement of thermal conductivity and thermal diffusivity using a thermoelectric module10.1088/1361-6501/aa5c30 ↗
4. A new peltier sensor for measuring the thermal conductivity of fluids10.1109/19.744181 ↗
5. Influence of convection at outer ceramic surfaces on the characterization of thermoelectric modules by impedance spectroscopy10.1063/1.5019881 ↗
6. Towards a comprehensive model for characterising and assessing thermoelectric modules by impedance spectroscopy10.1016/j.apenergy.2018.05.041 ↗
7. Characterization of thermal contacts between heat exchangers and a thermoelectric module by impedance spectroscopy
8. Pirani · Dtsch. Phys. Gesellschaft. · 1906 · 8 · 24
9. Small-size vacuum sensors based on silicon thermopiles10.1016/0924-4247(91)87052-5 ↗
10. The structures for electrostatic servo capacitive vacuum sensors10.1016/S0924-4247(98)00037-5 ↗
11. Field emitter-based vacuum sensors10.1016/j.vacuum.2011.08.008 ↗
12. MEMS type ionization vacuum sensor10.1016/j.sna.2016.05.021 ↗
13. Miniature and MEMS-type vacuum sensors and pumps10.1016/j.vacuum.2009.05.003 ↗
14. Measuring thermophysical properties of gases with a single thermocouple: peltier vacuum gauge10.1016/j.tca.2006.12.002 ↗
15. Y.-H. Jeong, D.-H. Jung, S.-M. Chung, C.-D. Park, Vacuum gauge using peltier tip, US Patent 6,727,709, 2004.
16. Dynamic operation of a micro-thermocouple sensor as a vacuum gauge10.1016/j.vacuum.2013.07.043 ↗
17. Evaluation of thermoelectric generators by I–V curves10.1007/s11664-015-4180-z ↗
18. Madhusudana · 2014
19. Evaluation of measurement data · 1995