journal article·2019-09

Effect of substrate temperatures on the properties of PLD Mo–V–Ag–O nanocomposite thin films

Cheng Lu, Yingying Fu, Junhong Jia, Gewen Yi, Erqing Xie, Hongjian Guo

Vacuum· Volume 167
Publisher page

Abstract

Abstract Nanocomposite Mo–V–Ag–O films were deposited on Inconel 718 by pulsed laser deposition (PLD) technique with self-prepared composite target. The effects of substrate temperatures on the growth characteristics, mechanical and tribological properties of nanocomposite films were investigated. The phase transformation, micro-structure and element content of target and films were investigated by XRD and FESEM equipped with EDS, respectively. The chemical and phase changes in wear tracks were measured by Raman spectrometer. The results showed that the high ingredient uniformity of target and onset of crystallization of film occurred at substrate temperature of 400 °C. Higher substrate temperature could reduce defects and improve the crystallization and micro-hardness of the composite films. Furthermore, the composite film showed the lowest friction coefficient about 0.24 at 500 °C which could be ascribed to the synergistic lubricating effect of vanadium oxide (VnO2n±1), molybdenum oxide (MoO3) and silver vanadate (AgVO3) and the formation of lubrication glaze on the worn surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Tribological properties of nanocomposite Cr-Mo-Si-N coatings at elevated temperature through silicon content modification10.1016/j.surfcoat.2018.01.062 ↗
2. Wear performance of the WC/Cu self-lubricating textured coating10.1016/j.vacuum.2018.08.029 ↗
3. Architecture of superthick diamond-like carbon films with excellent high temperature wear resistance10.1016/j.triboint.2014.08.017 ↗
4. Mechanical strengthening in self-lubricating CrAlN/VN multilayer coatings for improved high-temperature tribological characteristics10.1016/j.surfcoat.2016.02.003 ↗
5. Antibacterial and tribological properties of TaN-Cu, TaN-Ag, and TaN-(Ag,Cu) nanocomposite thin films10.1016/j.materresbull.2012.04.101 ↗
6. Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review10.1016/j.surfcoat.2013.04.034 ↗
7. Influence of Cu content on the structure, mechanical and tribological properties of W2N-Cu films10.1016/j.tsf.2017.01.030 ↗
8. Nanostructured self-lubricating CrN-Ag films deposited by PVD arc discharge and magnetron sputtering10.1016/j.vacuum.2011.01.022 ↗
9. Microstructure and properties of VN/Ag composite films with various silver content10.1016/j.vacuum.2016.12.020 ↗
10. Thin films of Mo2N/Ag nanocomposite-the structure, mechanical and tribological properties10.1016/j.surfcoat.2006.02.017 ↗
11. Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content10.1016/j.surfcoat.2008.10.040 ↗
12. Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000 °C10.1016/j.actamat.2010.06.006 ↗
13. Hard coatings with high temperature adaptive lubrication and contact thermal management: review10.1016/j.surfcoat.2014.04.046 ↗
14. Adaptive NbN/Ag coatings for high temperature tribological applications10.1016/j.surfcoat.2012.04.054 ↗
15. Phase diagram of V2O5-MoO3-Ag2O system: Part III. Vanadium-rich part of the diagram10.1007/s10973-007-8339-6 ↗
16. On the growth mechanism of pulsed-laser deposited vanadium oxide thin films10.1016/j.mseb.2004.04.017 ↗
17. Effect of substrate temperature and post annealing temperature on ZnO:Zn PLD thin film properties10.1016/j.optmat.2017.03.027 ↗
18. Studies on nanotribological and oxidation resistance properties of yttria stabilized zirconia (YSZ), alumina (Al2O3) based thin films developed by pulsed laser deposition10.1016/j.ceramint.2016.01.094 ↗
19. Influence of substrate temperature on structures and dielectric properties of pyrochlore Bi1.5Zn1.0Nb1.5O7 thin films prepared by pulsed laser deposition10.1016/j.apsusc.2010.04.056 ↗
20. Kinetic analysis of thermite reactions in Al–MoO3 nanocomposites10.2514/1.24853 ↗
21. Thermal decomposition of divanadium pentoxide V2O5: towards a nanocrystalline V2O3 phase10.1023/A:1021042232178 ↗
22. Effect of substrate temperature on microstructure and optical properties of nanocrystalline alumina thin films10.1016/j.ceramint.2013.04.104 ↗
23. Studying pulsed laser deposition conditions for Ni/C-based multi-layers10.1016/j.apsusc.2017.12.178 ↗
24. Substrate temperature effects on the structural, compositional, and electrical properties of VO2 thin films deposited by pulsed laser deposition10.1002/sia.6368 ↗
25. On the growth mechanism of pulsed-laser deposited vanadium oxide thin films10.1016/j.mseb.2004.04.017 ↗
26. Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition10.1016/j.apsusc.2006.01.029 ↗
27. Effect of Mo and Ag on the friction and wear behavior of ZrO2 (Y2O3)-Ag-CaF2-Mo composites from 20 °C to 1000 °C
28. Solid lubricant materials for high-temperatures a review10.1016/0301-679X(82)90089-5 ↗
29. Electrochemical reactivity of ball-milled MoO3−y as anode materials for lithium-ion batteries10.1016/j.jpowsour.2008.11.125 ↗
30. Spatially-confined electrochemical reactions of MoO3 nanobelts for reversible high capacity: critical roles of glucose10.1016/j.cej.2017.12.076 ↗
31. Tribological properties and lubrication mechanisms of a Ag-Mo composite10.1002/ls.1306 ↗
32. Layered atomic structures of double oxides for low shear strength at high temperatures10.1016/j.scriptamat.2010.02.004 ↗