Coupling nano-carbide strengthening with transformation induced plasticity effect to achieve over 1.5 GPa strength with 30% ductility in cold-rolled medium-Mn steel
Source abstract
Abstract
Abstract An ultra-high strength (over 1500 MPa) and enhanced ductility (30%) of cold-rolled medium-Mn steel is developed by quenching and tempering heat treatment. The highest product of strength and elongation of 45.7 GPa·% is obtained when tempering at 300 °C. The microstructure consists of martensite matirx, substantial nano-carbide and film-like/blocky retained austenite. The ultra-high strength derives from the precipitate strengthening of nano-carbide as efficient obstacles to dislocation motion. While, transformation induced plasticity effect of retained austenite enhances the plasticity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. On the characteristics of Portevin–Le Chatelier bands in cold-rolled 7Mn steel showing transformation-induced plasticity10.1016/j.ijplas.2018.01.010 ↗
2. An ultrahigh strength and enhanced ductility cold-rolled medium-Mn steel treated by intercritical annealing10.1016/j.scriptamat.2018.05.016 ↗
3. Microstructural evolution and tensile properties of 70 GPa·% grade strong and ductile hot-rolled 6Mn steel treated by intercritical annealing10.1016/j.msea.2018.12.110 ↗
4. Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions10.1016/j.msea.2018.04.115 ↗
5. Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel10.1016/j.scriptamat.2018.03.015 ↗
6. Achievement of high yield strength and strain hardening rate by forming fine ferrite and dislocation substructures in duplex lightweight steel10.1016/j.msea.2017.08.030 ↗
7. Kinematic and thermal characteristics of Lüders and Portevin-Le Chatelier bands in a medium Mn transformation-induced plasticity steel10.1016/j.actamat.2016.10.069 ↗
8. A lamellar structured ultrafine grain ferrite-martensite dual-phase steel and its resistance to hydrogen embrittlement10.1016/j.jallcom.2016.12.224 ↗
9. Ultrafine grained dual-phase martensite/ferrite steel strengthened and toughened by lamella structure10.1016/j.msea.2018.08.009 ↗
10. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
11. Quenching above martensite start temperature in quenching and partitioning (Q&P) steel through control of partial phase transformation10.1016/j.matlet.2018.07.062 ↗