Influence of oxidation temperature on the microstructure evolution of NiCoCrAlYTa powders
Source abstract
Abstract
Abstract In this paper, the microstructure evolution in NiCoCrAlYTa alloy powders at two different oxidation temperatures (900 and 1100 °C) was investigated. The results showed that higher oxidation temperature gave higher oxidation rate. Increasing temperature accelerated the diffusion of alloying elements outwards to the powder surface and oxide growth rate. Alumina was the main oxide when the Al content in the powder was high enough. With Al depletion, β phase was depleted by phase transformation of β-γ′-γ at 900 °C and β-γ at 1100 °C. When the Al content in the powder was not enough to maintain the growth of alumina layer, spinel phases were highly formed above the alumina layer and internal alumina begun to largely form. Y-rich and Ta-rich phases were detected beneath the oxide layers at long oxidation time. The diffusion behavior of alloying elements in the different oxidation stages was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. High temperature coatings for gas turbine blades: a review10.1016/0257-8972(89)90099-6 ↗
2. Pre-oxidation and TGO growth behaviour of an air-plasma-sprayed thermal barrier coating10.1016/j.surfcoat.2008.01.021 ↗
3. Oxidation resistance of vacuum plasma sprayed CoNiCrAlY coatings modified by filtered cathodic vacuum arc deposition aluminizing10.1007/s11666-012-9866-7 ↗
4. Modelling the microstructural evolution and degradation of M-Cr-Al-Y coatings during high temperature oxidation10.1016/0257-8972(87)90095-8 ↗
5. The role that bond coat depletion of aluminum has on the lifetime of APS‐TBC under oxidizing conditions10.1002/maco.200804137 ↗
6. Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation10.1016/j.surfcoat.2013.05.008 ↗
7. Oxide phase development upon high temperature oxidation of γ-NiCrAl alloys10.1002/maco.200503934 ↗
8. MCrAlY coating design based on oxidation–diffusion modelling. Part II: lifing aspects10.1016/j.surfcoat.2014.05.010 ↗
9. Designing oxidation-resistant coatings
10. Oxidation of NiAl and FeAl10.1016/S0966-9795(99)00037-0 ↗
11. Some comments on the role of yttrium in protective oxide scale adherence10.1016/0025-5416(87)90387-9 ↗
12. Influences of MCrAlY coatings on oxidation resistance of single crystal superalloy DD98M and their inter-diffusion behaviors10.1016/j.jallcom.2015.07.095 ↗
13. Comparative study on oxidation behavior of selected MCrAlY coatings by elemental concentration profile analysis10.1016/j.apsusc.2008.07.141 ↗
14. Microstructure and properties of HVOF-sprayed NiCrAlY coatings modified by rare earth10.1007/s11666-014-0097-y ↗
15. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
16. Inter-diffusion and oxidation behavior in electron-beam evaporated NiAl coatings10.1016/j.vacuum.2006.05.010 ↗
17. Thermal stability and oxidation behavior of nanostructured NiCoCrAlY coatings10.1016/j.surfcoat.2011.03.005 ↗
18. Structure and oxidation resistance of plasma sprayed Ni-Si coatings on carbon steel10.1016/j.vacuum.2006.01.031 ↗
19. Thermal stability of phases in a NiCoCrAlY coating alloy10.1557/JMR.2008.0282 ↗
20. High-temperature oxidation of an aluminized NiCr alloy formed by a magnetron-sputtered Al diffusion coating10.1007/s11085-005-5705-2 ↗
21. Effect of high vacuum heat treatment on microstructure and cyclic oxidation resistance of HVOF-CoNiCrAlY coatings10.1016/j.vacuum.2016.10.014 ↗
22. The behavior of MCrAlY coatings on Ni3Al-base superalloy10.1016/S0921-5093(03)00254-5 ↗
23. Efficiency of α -alumina as diffusion barrier between bond coat and bulk material of gas turbine blades10.1016/S0042-207X(02)00746-7 ↗
24. Improved oxidation resistance and diffusion barrier behaviors of gradient oxide dispersed NiCoCrAlY coatings on superalloy10.1016/j.vacuum.2010.09.006 ↗