journal article·2018-12

Vacuum-assisted synthesis of spherical activated carbon using coal tar pitch with low softening point by copolymerization

Shuai Sun, Lei Wang, Chengyang Wang, Yang Zhang

Vacuum· Volume 158
Publisher page

Abstract

Abstract Coal tar pitch with a softening point (SP) of 78 °C is mixed with divinylbenzene (DVB) and then spheroidized by suspension method in dimethyl silicone oil for 1 h. During the spheroidization process, the mixtures of pitch and DVB are copolymerized due to vinyl in DVB. After vacuum-assisted heat treatment, the copolymer spheres can be stabilized completely and then carbonized directly at high temperature under Ar atmosphere without melting and deformation. After activation using steam at 850 °C for 1.5 h, spherical activated carbon (SAC) with smooth surface and specific surface area SBET = 520 m2 g−1 can be prepared. Further studies show that mesopore volume of the SAC is 0.29 cm3 g−1, which accounts for 72.5% of the total pore volume. The good spherical morphology, smooth surface and rich pores (micropores and mesopores) can be attributed to appropriate copolymerization and vacuum-assisted treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Supercapacitor Materials and Fabrication · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Kinetics and mechanism study of low-temperature selective catalytic reduction of NO with urea supported on pitch-based spherical activated carbon10.1021/ie102506q ↗
2. Low-temperature selective catalytic reduction of NO with urea supported on pitch-based spherical activated carbon10.1021/ie901772y ↗
3. Synergistic degradation of bisphenol A by pulsed discharge plasma with granular activated carbon: effect of operating parameters, synergistic mechanism and possible degradation pathway10.1016/j.vacuum.2018.07.044 ↗
4. Surface-modified spherical activated carbon materials for pre-combustion carbon dioxide capture10.1039/C5RA02665B ↗
5. Pith based spherical activated carbon for CO2 removal from flue gases10.1016/j.ces.2011.06.070 ↗
6. Adsorption of steroid micropollutants on polymer-based spherical activated carbon (PBSAC)10.1016/j.jhazmat.2017.03.036 ↗
7. Spherical activated carbons for low concentration toluene adsorption10.1016/j.carbon.2010.03.067 ↗
8. Effects of various metals and their loading methods on the mesopore formation in pitch-based spherical activated carbon10.1016/S0008-6223(99)00075-5 ↗
9. Effect of hydrogen on the mesopore development of pitch-based spherical activated carbon containing iron during activation by steam10.1016/S0008-6223(99)00058-5 ↗
10. A facile synthesis method for millimeter polyacrylonitrile-based activated carbon spheres with radiate tunnel-like macropores10.1016/j.matlet.2010.12.042 ↗
11. Preparation and characterization of highly mesoporous spherical activated carbons from divinylbenzene-derived polymer by ZnCl2 activation10.1016/j.jcis.2007.09.016 ↗
12. Preparation and properties of phenolic resin-based activated carbon spheres with controlled pore size distribution10.1016/S0008-6223(01)00222-6 ↗
13. Preparation and characterization of spherical activated carbons from oil agglomerated bituminous coals for removing organic impurities from water10.1016/S0008-6223(02)00119-7 ↗
14. Adsorption performance of hollow spherical sludge carbon prepared from sewage sludge and polystyrene foam wastes10.1021/sc500840b ↗
15. Fabrication of granular activated carbons derived from spent coffee grounds by entrapment in calcium alginate beads for adsorption of acid orange 7 and methylene blue10.1016/j.biortech.2016.07.098 ↗