Effects of heat treatment on the microstructure and mechanical property of Mg 6Zn 1Cu-0.5Ce alloy
Source abstract
Abstract
Abstract The microstructure and mechanical properties of Mg 6Zn 1Cu-0.5Ce alloy under different heat-treated conditions were investigated by using OM, XRD, SEM, TEM and the tensile test. The results indicate that the alloy is mainly composed of α-Mg, CuMgZn, MgZn2, and Mg12Ce phases. After T4 treatment at 405 °C for 24 h, the eutectic phases dissolve into α-Mg matrix sufficiently and the coarse residual eutectic phases transform into fine and discontinuous particles. After T6 treatment at 160 °C for 20 h, the fine and dispersible precipitates including β1′ rods, β2′ discs and granular phase precipitate. The β1′ rods and granular precipitates are identified as MgZn2 phases and CuMgZn phases, respectively. Artificially aged alloy is strengthened mainly by β1′ rods that is perpendicular to the basal plane and granular CuMgZn phase, which hinders the movement of dislocations and grain boundaries. Conducting aging treatment at lower temperature is beneficial to increase the density of precipitates and improve the mechanical property. The tensile strength, hardness and elongation reach the value of 256 MPa, 84 HV and 12.5%, respectively. In addition, the main characteristic of fracture is transformed from the intergranular and cleavage fracture to transgranular and quasi-cleavage fracture after heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Enhancing plastic deformability of Mg and its alloys—a review of traditional and nascent developments10.1016/j.jma.2017.11.001 ↗
2. Microstructure evolution and mechanical properties of hot deformed Mg9Al1Zn samples containing a friction stir processed zone10.1016/j.jma.2017.11.003 ↗
3. The effect of precipitation hardening on the structure and mechanical and tribological properties of magnesium alloy WE5410.1016/j.vacuum.2017.02.015 ↗
4. The effects of vacuum annealing temperatures on the microstructure, mechanical properties and electrical resistivity of Mg–3Al–1Zn alloy ribbons10.1016/j.vacuum.2015.02.019 ↗
5. Mordike · 1998
6. Effects of Cu addition on aging precipitation behavior of cast Mg-3Zn-xCu-0.6Zr magnesium alloys
7. Unsworth · Light Met. Age · 1986 · 8 · 10
8. Unsworth · 1987 · 25
9. Mechanical properties of naturally aged Mg-Zn-Cu-Mn alloy10.1016/j.msea.2007.12.006 ↗
10. Natural aging in Mg-Zn(-Cu) alloys10.1007/s11661-008-9545-y ↗
11. Age-hardening behavior and precipitates of as-cast Mg-3Zn-1.5Cu-0.6Zr Mg alloy
12. Reduced temperature (22-100°C) aging of an Mg-Zn alloy10.1016/j.msea.2008.02.038 ↗
13. Structural characteristics of β1′ precipitates in Mg-Zn-based alloys10.1016/j.scriptamat.2007.07.028 ↗
14. The structure of β1′ precipitates in Mg-Zn-Y alloys
15. Effect of Al additions on the age hardening response of the Mg-2.4Zn-0.1Ag-0.1Ca (at.%) alloy-TEM and 3DAP study10.1016/j.msea.2009.09.015 ↗
16. Precipitation hardening of Mg-Zn and Mg-Zn-RE alloys10.1007/BF02670757 ↗
17. Microstructures and mechanical properties of Mg−2%Zn−0.4%RE alloys10.1016/S1003-6326(10)60496-7 ↗
18. Effect of Ce on microstructures and mechanical properties of rapidly solidified Mg−Zn alloy10.1179/026708310X12683158443242 ↗
19. Effects of rare earth elements on microstructure and high temperature mechanical properties of ZC63 alloy10.1007/s10853-005-2099-0 ↗
20. Excellent creep properties of Mg-Zn-Cu-Gd-based alloy strengthened by quasicrystals and laves phases10.1557/JMR.2005.0156 ↗
21. He · 2013 · 25
22. Influence of phase composition on microstructure and properties of Mg-5Al-0.4Mn-xRE(x=0, 3 and 5 wt.%) alloys10.1016/j.matchar.2016.03.014 ↗
23. Microstructure and mechanical properties of Mg–6Zn–xCu–0.6Zr (wt.%) alloys10.1016/j.jallcom.2010.12.165 ↗
24. Microstructure and mechanical properties of Mg-Zn-Gd-based alloys strengthened with quasicrystal and Laves phase
25. Microstructure evolution during homogenization of a τ-type Mg–Zn–Al alloy10.1016/j.jallcom.2006.10.135 ↗
26. Li · 2003 · 957
27. Precipitation hardening of Mg-Zn and Mg-Zn-RE alloys10.1007/BF02670757 ↗
28. Microstructure and mechanical properties of Mg-Zn-Gd-based alloys strengthened with quasicrystal and Laves phase
29. A comparative characterization of the microstructures and tensile properties of as-cast and thixoforged in situ AM60B-10 vol% Mg2Sip composite and thixoforged AM60B10.3390/met5010457 ↗
30. Aging strengthening of squeezed Mg-15Gd-3Y alloy
31. Study on aging strengthening behavior of Mg-6.0%Zn-0.5%Zr-2.0%Nd-1.0%Y alloy
32. Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles10.1016/j.msea.2013.01.010 ↗
33. Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy10.1007/s11661-003-0095-z ↗
34. Effects of homogenization time on aging behavior and mechanical properties of AZ91 alloy10.1016/j.msea.2017.12.061 ↗
35. Effect of pre-aging and Al addition on age-hardening and microstructure in Mg-6 wt% Zn alloys10.1016/j.msea.2008.06.005 ↗