New leak element using 1D nanofluidic channels and indium sealing
Source abstract
Abstract
Abstract Nanofluidic channels with a depth of ∼100 nm were developed as a leak element, where the fluidic channels were etched on silicon wafer by reactive ion etching and then enclosed by direct silicon bonding. Instead of the Torr-seal gluing method, a tight lamination between the chip and the vacuum flange was achieved using indium gasket sealing, eliminating the influence of Torr-seal outgassing. Two leak elements with different amount of parallel channels were fabricated and their values were characterized by the difference method. The results demonstrate that the conductance of the leak elements behave in reasonable agreement with their theoretically calculated conductance with relative errors of approximately 4.9% and 42.7%, respectively. The gas flow through these leak elements realizes molecular flow at pressures ranging from high vacuum up to 105 Pa for helium, argon, and nitrogen and can therefore be used as predictable leak elements for any gas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and devices · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Stability tests of quadrupole mass spectrometer by two-stage flow-dividing system10.1016/j.vacuum.2010.04.005 ↗
2. Comparison of the stability of hot and cold cathode ionization gauges10.1116/1.1578654 ↗
3. Nano-holes as standard leak elements10.1016/j.measurement.2014.09.017 ↗
4. Microfabricated silicon leak for sampling planetary atmospheres with a mass spectrometer10.1063/1.2748360 ↗
5. New leak element using sintered stainless steel filter for in-situ calibration of ionization gauges and quadrupole mass spectrometers10.1016/j.vacuum.2011.02.013 ↗
6. New leak element using anodic aluminum oxide10.1016/j.vacuum.2016.06.007 ↗
7. Fabrication of conductance-controllable standard leak elements on anodic aluminum oxide using a selective coating method10.1116/1.4985621 ↗
8. New leak assembly based on fluidic nanochannels
9. Outgassing measurements of Torrseal vacuum resin,” https://dcc.ligo.org/public/0028/T960228/000/T960228–00.pdf.
10. LIGO Vacuum Compatible Materials List” https://dcc.ligo.org/public/0003/E960050/000/E960050-B.pdf.
11. Fabrication and characterization of 20 nm planar nanofluidic channels by glass–glass and glass–silicon bonding10.1039/b502809d ↗
12. Characterization of silicon wafer bonding for Power MEMS applications10.1016/S0924-4247(02)00329-1 ↗
13. Silicon-to-silicon direct bonding method10.1063/1.337750 ↗