Anodic growth of Nitrogen-doped Titanium dioxide nanotubes by anodization process of elemental Titanium in ethylene glycol based electrolyte solution with different water contents
Source abstract
Abstract
Abstract Anatase Nitrogen-doped Titanium Dioxide (Nitrogen-doped TiO2) nanotubes were grown via an anodization process in an ethylene-glycol based electrolyte solution containing ammonium fluoride (NH4F) and different water contents (2–4 vol%). These electrolyte solutions act as the dopants sources of Nitrogen in anodic TiO2 nanotubes. The influence of different water content of electrolyte solution on physical properties of the Nitrogen-doped TiO2 nanotubes was studied. It was observed that the diameter of the Nitrogen-doped TiO2 nanotubes was increased by the water content increasing of the electrolyte solution. Also, the Nitrogen-doped TiO2 nanotubes which grown in the electrolyte solution with 3 vol% water content had maximum length. An energy dispersive X-Ray analysis (EDX) revealed that the TiO2 nanotubes were heavily doped with Nitrogen. UV–Vis diffuse reflectance spectroscopy (DRS) and Photoluminescence (PL) measurements showed that the Nitrogen-doped TiO2 nanotubes had narrow band gap energy (lower than 3 eV).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. TiO2 nanotube arrays formation in fluoride/ethylene glycol electrolyte containing LiOH or KOH as photoanode for dye-sensitized solar cell10.1016/j.jphotochem.2017.04.015 ↗
2. Scalable fabrication of prototype sensor for selective and sub-ppm level ethanol sensing based on TiO2 nanotubes decorated porous silicon10.1016/j.snb.2017.03.154 ↗
3. Transparent TiO2 nanotubes on zirconia for biomedical applications10.1039/C7RA03940A ↗
4. Direct evidence and enhancement of surface plasmon resonance effect on Ag-loaded TiO2 nanotube arrays for photocatalytic CO2 reduction10.1016/j.apsusc.2017.10.194 ↗
5. One-dimensional titanium dioxide nanomaterials: nanowires, nanorods, and nanobelts10.1021/cr400633s ↗
6. a review on TiO2 nanotubes: influence of anodization parameters, formation mechanism, properties, corrosion behavior, and biomedical applications10.1007/s40735-015-0024-x ↗
7. Effect of Ti substrate ion implantation on the physical properties of anodic TiO2 nanotubes10.3938/jkps.72.604 ↗
8. Effect of different polishing methods on anodic titanium dioxide formation10.1155/2015/295126 ↗
9. Influence of anodization parameters on morphology of TiO2 nanostructured surfaces10.5185/amlett.2016.6156 ↗
10. Effect of water content on ionic current, electronic current, and nanotube morphology in Ti anodizing process10.1007/s10008-015-2744-8 ↗
11. A facile one-step electrochemical strategy of doping iron, nitrogen, and fluorine into titania nanotube arrays with enhanced visible light photoactivity10.1016/j.jhazmat.2015.03.049 ↗
12. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
13. N-doped anodic titania nanotube arrays for hydrogen production10.1007/s11814-010-0498-7 ↗
14. Anodic TiO2 nanotube layers: why does self-organized growth occur: a mini review10.1016/j.elecom.2014.06.021 ↗
15. Anodization parameters influencing the growth of titania nanotubes and their photoelectrochemical response
16. Formation mechanism of gaps and ribs around anodic TiO2 nanotubes and method to avoid formation of ribs physical and analytical electrochemistry, electrocatalysis, and photoelectrochemistry10.1149/2.0721504jes ↗
17. Controlled nitrogen insertion in titanium dioxide for optimal photocatalytic degradation of atrazine10.1039/C5RA00890E ↗
18. Study of the highly ordered TiO2 nanotubes physical properties prepared with two-step anodization10.1016/j.rinp.2018.02.009 ↗
19. Highly efficient CuO incorporated TiO2 nanotube photocatalyst for hydro- gen production from water10.1016/j.ijhydene.2011.02.103 ↗
20. Nitrogen self-doped nanosized TiO2 sheets with exposed {001} facets for enhanced visible-light photocatalytic activity10.1039/c1cc11740h ↗
21. Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application10.1038/srep29683 ↗
22. Gold nanoparticles-sensitized wide and narrow band gap TiO2 for visible light applications: a comparative study10.1039/C5NJ00556F ↗