journal article·2017-10

Effect of selenium incorporation at precursor stage on growth and properties of Cu2ZnSnSe4 thin films

Dipak Ramdas Nagapure, Rhishikesh Mahadev Patil, G. Swapna Mary, G. Hema Chandra, M. Anantha Sunil, Y.P. Venkata Subbaiah, Mukul Gupta, R. Prasada Rao

Vacuum· Volume 144
Publisher page

Abstract

In the present work, the effect of the selenium incorporation in between the Sn-ZnSe-Cu precursor layers on growth of Cu2ZnSnSe4 thin films by employing selenization is reported. Multiple stacks of precursors (Sn/Se/ZnSe/Se/Cu/Se) were sequentially evaporated in high vacuum onto soda lime glass substrates held at 100 degrees C and their subsequent selenization at 350 degrees C using a tubular furnace led to the complete crystallization into single phase Cu2ZnSnSe4 films. X-ray diffraction pattern of stacked layers selenized at 350 degrees C revealed the formation of kesterite-type Cu2ZnSnSe4 films with a preferred orientation along (112) plane. Raman analysis using multi wavelength excitation confirms the growth of single phase CZTSe films. Secondary ion mass spectroscopy (SIMS) depth profiles illustrated fairly uniform distribution of constituent elements. Optical absorption studies of the films showed an optical band gap of 0.97 eV with high absorption coefficient (> 10(4)cm(-1)). The electrical properties of the films exhibited p-type conductivity with resistivity of 4.18 Omega cm, mobility of 11.3 cm(2)(Vs)(-1) and carrier concentration of 1.32 x 10(17) cm(-3). Our approach and results would open a new way for the synthesis of Cu2ZnSnSe4 directly on plastic substrates. (c) 2017 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Growth of Cu2ZnSnSe4 thin films by selenization of sputtered single-layered Cu-Zn-Sn metallic precursors from a Cu-Zn-Sn alloy target10.1007/s13391-011-0909-x ↗
3. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
4. Preparation of Cu2ZnSnSe4 solar cells by low-temperature co-evaporation and following selenization10.1063/1.4939445 ↗
5. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9 power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
6. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
7. Physical and Electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
8. Characterization of defects in 9.7% efficient Cu2ZnSnSe 4-CdS-ZnO solar cells10.1063/1.4826448 ↗
9. Solution-processed highly efficient Cu2ZnSnSe4 thin film solar cells by dissolution of elemental Cu, Zn, Sn, and Se powders
10. Highly efficient copper-zinc-tin-selenide (CZTSe) solar cells by electrodeposition10.1002/cssc.201301347 ↗
11. A nonvacuum approach for fabrication of Cu2ZnSnSe4/In2S3 thin film solar cell and optoelectronic characterization10.1021/acs.jpcc.5b03193 ↗
12. Influences of extended selenization on Cu2ZnSnSe4 solar cells prepared from quaternary nanocrystal ink10.1021/jp508028t ↗
13. Cu2ZnSnSe4 solar cell absorbers spin-coated from amine-containing ether solutions10.1016/j.solmat.2012.05.004 ↗
14. Growth of Cu2ZnSnSe4 by cosputtering and reactive annealing atmosphere10.1016/j.solmat.2014.08.001 ↗
15. Investigation of the solid state reactions by time-resolved X-ray diffraction while crystallizing kesterite Cu2ZnSnSe4 thin films10.1016/j.tsf.2013.01.054 ↗
16. Intermetallic compounds dynamic formation during annealing of stacked elemental layers and its influences on the crystallization of Cu2ZnSnSe4 films10.1016/j.matchemphys.2013.07.021 ↗
17. A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2014.04.016 ↗
18. Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells10.1016/j.jallcom.2015.11.194 ↗
19. Growth and characterization of Cu2ZnGeSe4 thin films by selenization of multiple stacks (Cu/Se/ZnSe/Se/Ge/Se) in high vacuum10.1016/j.vacuum.2016.06.020 ↗
20. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
21. Kesterites—a challenging material for solar cells10.1002/pip.2156 ↗
22. Secondary crystalline phases identification in Cu2ZnSnSe4 thin films: contributions from Raman scattering and photoluminescence10.1007/s10853-014-8446-2 ↗
23. Polarized Raman scattering analysis of Cu2ZnSnSe4 and Cu2ZnGeSe4 single crystals
24. Formation mechanism of Cu2ZnSnSe4 absorber layers during selenization of solution deposited metal precursors10.1016/j.jallcom.2013.03.056 ↗
25. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
26. Effect of post-deposition annealing on the growth of Cu2ZnSnSe 4 thin films for a solar cell absorber layer10.1088/0268-1242/23/8/085023 ↗
27. Fabrication of Cu2ZnSnSe4 solar cells through multi-step selenization of layered metallic precursor film10.1016/j.tsf.2016.03.021 ↗
28. Optical spectroscopy studies of Cu2ZnSnSe4 thin films10.1016/j.tsf.2014.09.010 ↗
29. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: on the discrepancies of reported band gap values10.1063/1.3457172 ↗
30. Single-step sputtered Cu2SnSe3 films using the targets composed of Cu2Se and SnSe210.1016/j.tsf.2010.04.077 ↗
31. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
32. First principles calculations of defect formation in in-free photovoltaic semiconductors Cu2ZnSnS4 and Cu2ZnSnSe410.1143/JJAP.50.04DP07 ↗
33. Existence and removal of Cu2Se second phase in coevaporated Cu2ZnSnSe4 thin films
34. High quality sustainable Cu2ZnSnSe4 (CZTSe) absorber layers in highly efficient CZTSe solar cells
35. Development of 3.7 % efficient Cu2ZnSnSe4 solar cells by selenizing Cu-Zn-Sn films deposited by DC sputtering on TiN-protected Mo/Glass substrates
36. Effects of the metallic target compositions on the absorber properties and the performance of Cu2ZnSnSe4 solar cell devices fabricated on TiN-coated Mo/glass substrates10.1016/j.mseb.2014.03.014 ↗
37. Preparation and analysis of sputtered Cu2ZnSnSe4 thin films10.4028/www.scientific.net/AMR.463-464.602 ↗
38. Cu2ZnSnSe4 thin films by selenization of simultaneously evaporated Sn-Zn-Cu metallic lays for photovoltaic applications10.1016/j.phpro.2012.03.612 ↗
39. Cation/anion substitution in Cu2ZnSnSe4 for improved photovoltaic performance
40. The influence of sequence of precursor films on CZTSe thin films prepared by ion-beam sputtering deposition