Oxidation behavior of co-deposited ZrC modified C/C composites prepared by chemical liquid-vapor infiltration process
Source abstract
Abstract
Abstract The oxidation behavior of C/C-ZrC composites prepared by chemical liquid-vapor infiltration (CLVI) process was studied, and the effects of co-deposited ZrC on the oxidation resistance properties were also discussed. Results indicate that an excellent oxidation resistance of C/C-ZrC composites has been obtained due to introduction of co-deposited ZrC. After 240 min oxidation at 900 °C, the mass loss of C/C-ZrC composites reaches to 11.77%, which decreases remarkably compared with C/C composites (90.74%). ZrC ceramics co-deposited on carbon fibers can improve the anti-oxidation properties of the fiber/matrix interfaces and the matrix to decrease the amounts of oxidation defects. Moreover, ZrO 2 layers are produced by the oxidation of ZrC, which can form a protective film to reduce the erosive attack. A schematic was proposed to further illustrate the oxidation behavior of C/C-ZrC composites. Additionally, co-deposition of ZrC leads to high graphitization degree of C/C composites, thus increasing the activation energy of the composites, which also improves oxidation resistance properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The future of carbon/carbon composites10.1016/0008-6223(87)90116-3 ↗
2. Enhanced bonding strength and thermal cycling performance of MoSi2-CrSi2-SiC-Si coating for carbon/carbon composites by surface modification via blasting treatment10.1016/j.ceramint.2016.06.008 ↗
3. Nanowire-toughened transition layer to improve the oxidation resistance of SiC–MoSi2–ZrB2 coating for C/C composites10.1016/j.corsci.2016.05.013 ↗
4. Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties10.1016/j.vacuum.2014.01.024 ↗
5. Oxidation resistance of a La-Mo-Si-O-C coating prepared by supersonic atmosphere plasma spraying on the surface of SiC-coated C/C composites10.1016/j.surfcoat.2016.04.079 ↗
6. HfC nanowires to improve the toughness and oxidation resistance of Si-Mo-Cr/SiC coating for C/C composites10.1016/j.ceramint.2016.06.064 ↗
7. Ablation behavior and mechanism of C/C-HfC-SiC composites10.1016/j.vacuum.2015.03.024 ↗
8. Supersonic plasma sprayed MoSi2-ZrB2 antioxidation coating for SiC-C/C composites10.1179/1743294415Y.0000000098 ↗
9. Erosion resistance of C/C-SiC-ZrB2 composites exposed to oxyacetylene torch10.1016/j.jeurceramsoc.2016.04.007 ↗
10. Ablation resistance of wedge-shaped C/C-ZrB2-ZrC-SiC composites exposed to an oxyacetylene torch10.1016/j.corsci.2016.08.010 ↗
11. Effects of SiC addition on the ablation properties of C/C composites in different heat fluxes under oxyacetylene torch10.1016/j.vacuum.2012.09.025 ↗
12. Fabrication of gradient C/C-SiC-MoSi2 composites with enhanced ablation performance10.1016/j.ceramint.2016.04.176 ↗
13. Ablation mechanism of carbon/carbon composites modified by Hf-SiC in two conditions under oxyacetylene10.1016/j.jmst.2016.01.013 ↗
14. Bonding strength, thermal shock and oxidation resistance of interlocking (Zr, Hf) C-SiC/SiC double-layer coating for C/C composites10.1016/j.surfcoat.2017.02.072 ↗
15. The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame10.1016/j.corsci.2010.09.028 ↗
16. ZrC ablation protective coating for carbon/carbon composites
17. Ablation behavior of ultra-high temperature ceramic composites10.1016/j.msea.2007.02.040 ↗
18. M. Houdayer, J. Spitz, D. Tran-Van, Process for the densification of a porous structure, US Patent No.4472454; 1984.
19. Microstructure of the pyrocarbon matrix prepared by the CLVI process10.1016/j.msea.2003.11.025 ↗
20. Improvement of film boiling chemical vapor infiltration process for fabrication of large size C/C composite10.1016/j.matlet.2005.11.012 ↗
21. Microstructures and mechanical properties of carbon/carbon composites reinforced with carbon nanofibers/nanotubes produced in situ10.1016/j.carbon.2007.03.042 ↗
22. Preparation of co-deposited C/C-ZrC composites by CLVD process and its properties10.1016/j.jallcom.2016.06.223 ↗
23. Raman scattering investigation of carbons obtained by heat treatment of a polyfurfuryl alcohol10.1016/0167-2738(96)00352-9 ↗
24. Raman spectroscopic characterization of graphites: a re-evaluation of spectra/structure correlation10.1016/0008-6223(93)90091-N ↗
25. Raman spectrum of graphite10.1063/1.1674108 ↗
26. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
27. Classifying nanostructured carbons using graphitic indices derived from Raman spectra10.1016/j.carbon.2009.10.002 ↗
28. Resistance to ablation of pitch-derived ZrC/C composites10.1016/j.carbon.2004.05.006 ↗
29. Fabrication and properties of Cf/SiC-ZrC composites10.1111/j.1551-2916.2008.02632.x ↗
30. A simple model for the oxidation of carbon-containing composites10.1016/j.corsci.2009.12.002 ↗
31. Improving the oxidation resistance of carbon/carbon composites at low temperature by controlling the grafting morphology of carbon nanotubes on carbon fibers10.1016/j.corsci.2012.03.031 ↗
32. sp3/sp2 characterization of carbon materials from first-principles calculations: X-ray photoelectron versus high energy electron energy-loss spectroscopy techniques10.1016/j.carbon.2005.01.002 ↗
33. Hybrid crystalline sp2-sp3 carbon as a high-efficiency solar cell absorber10.1016/j.carbon.2016.08.015 ↗