Reduction of the coefficient of friction of niobium nitride coatings by the addition of bismuth
Source abstract
Abstract
Abstract Composite coatings of niobium nitride containing bismuth inclusions were deposited using a dual magnetron sputtering system with independent power suppliers for each targets; Bi and Nb. The deposition was performed under and Ar/N2 atmosphere at a 2.3 flow rate ratio, which allows the stoichiometric NbN phase to be obtained. The aim of this work was to evaluate the effect of increasing concentrations of Bi, proposed as a lubricous second phase, in the structural, mechanical and tribological properties of niobium nitride (NbN) coatings, searching for a reduction in the coefficient of friction but trying to keep hardness values larger than the tool steels (>10 GPa). The power applied to the Nb target was fixed, while the power on the Bi target was increased; obtaining Bi atomic percentage values of 1.7, 4.9 and 8.4 at%. The Bi inclusions showed different sizes and distribution in the volume and surface of the coatings. The results indicated a reduction in the hardness from 30 GPa of the NbN coating to 13.9 GPa for the highest Bi concentration. However, a more significant reduction was observed for the coefficient of friction (CoF) from 0.8 of the NbN to 0.3 for Bi concentrations between 4.9 and 8.4 at%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Magnetron sputtered NbN films with electroplated Cr interlayer10.1016/j.vacuum.2011.06.018 ↗
2. Adhesion and wear studies of magnetron sputtered NbN films10.1016/j.triboint.2011.12.023 ↗
3. Magnetron sputtered NbN thin films and mechanical properties10.1016/S0257-8972(03)00848-X ↗
4. Some features of the Nb-N and Nb-N-O systems10.3891/acta.chem.scand.08-0208 ↗
5. Phase reactions in the Nb-N system below 1400 degrees C10.1016/S1359-6454(00)00056-2 ↗
6. The influence of the magnetic field configuration on plasma parameters and microstructure of niobium nitride films10.1016/j.surfcoat.2006.08.120 ↗
7. The chemistry, structure, and resulting wear properties of magnetron-sputtered NbN thin films10.1016/S0040-6090(96)09529-6 ↗
8. Structure and mechanical properties of vacuum arc-deposited NbN coatings10.1016/S0040-6090(98)00544-6 ↗
9. Structural and mechanical properties of sputtered cubic and hexagonal NbNx thin films10.1016/j.surfcoat.2003.10.040 ↗
10. The influence of the magnetic field configuration on plasma parameters and microstructure of niobium nitride films10.1016/j.surfcoat.2006.08.120 ↗
11. Morphological, structural and mechanical properties of NbN thin films deposited by reactive magnetron sputtering10.1016/j.surfcoat.2005.11.054 ↗
12. Comparative study of niobium nitride coatings deposited by unbalanced and balanced magnetron sputtering10.1016/j.tsf.2008.03.043 ↗
13. Unbalanced magnetic field configuration: plasma and film properties10.1088/0953-8984/18/32/S02 ↗
14. Structure, mechanical property, and tribological behavior of c-NbN/CNx multilayers grown by magnetron sputtering10.1016/j.surfcoat.2012.03.085 ↗
15. Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings10.1016/j.surfcoat.2010.07.029 ↗
16. CrN-Ag nanocomposite coatings: tribology at room temperature and during a temperature ramp10.1016/j.surfcoat.2009.09.018 ↗
17. Nanocomposite tribological coatings with “chameleon” surface adaptation10.1116/1.1487875 ↗
18. Smart nanocomposite coatings with chameleon surface adaptation in tribological applications
19. Limits to the strength of super- and ultrahard nanocomposite coatings10.1116/1.1558586 ↗
20. Solid lubricant coatings: recent developments and future trends10.1023/B:TRIL.0000044487.32514.1d ↗
21. Historical developments and new trends in tribological and solid lubricant coatings10.1016/j.surfcoat.2003.10.022 ↗
22. New solid lubricant coatings10.1016/S0043-1648(01)00764-5 ↗
23. Dry bearings: a survey of materials and factors affecting their performance10.1016/0041-2678(73)90172-3 ↗
24. Bismuth-based nanoparticles as the environmentally friendly replacement for lead-based piezoelectrics10.1039/C5RA02151K ↗
25. Zeinert · 2014
26. Abrasion by lamellar solid lubricants10.1016/0043-1648(67)90188-3 ↗
27. Bismuth nanoparticles synthesized by laser ablation in lubricant oils for tribological tests10.1016/j.jallcom.2014.12.054 ↗
28. Adaptive NbN/Ag coatings for high temperature tribological applications10.1016/j.surfcoat.2012.04.054 ↗
29. Influence of Cu additions on the mechanical and wear properties of NbN coatings10.1016/j.surfcoat.2014.09.056 ↗
30. Deposition of amorphous carbon–silver composites10.1016/j.tsf.2009.09.092 ↗
31. The relationship between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
32. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
33. Superconducting niobium nitride films deposited by unbalanced magnetron sputtering10.1016/j.tsf.2008.06.065 ↗
34. Magnetron sputtered NbN thin films and mechanical properties10.1016/S0257-8972(03)00848-X ↗
35. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
36. Microstructural evolution during film growth10.1116/1.1601610 ↗
37. Electronic states and physical properties of hexagonal beta-Nb2N and delta '-NbN nitrides10.1016/j.tsf.2005.07.185 ↗
38. TaSiN nanocomposite thin films: correlation between structure, chemical composition, and physical properties10.1016/j.tsf.2014.02.079 ↗
39. First-principles study of bismuth films at transition-metal grain boundaries10.1103/PhysRevB.90.144102 ↗
40. Reactive pulsed laser deposition and characterization of niobium nitride thin films10.1016/j.surfcoat.2011.08.028 ↗
41. Tribological investigation of zirconium nitride/silver nanocomposite structures10.1016/j.surfcoat.2005.11.135 ↗
42. Stress and preferred orientation in nitride-based PVD coatings10.1016/j.surfcoat.2007.08.029 ↗
43. The absorption of X rays by chemical elements of high atomic numbers10.1073/pnas.6.10.607 ↗
44. The influence of surface roughness on instrumented indentation testing (IIT)
45. recent advances in hard, tough, and low friction nanocomposite coatings10.1016/S1007-0214(05)70135-8 ↗