Holey-plate plasma source for plasma processing
Source abstract
Abstract
Abstract High-density microwave plasma generated and sustained by evanescent waves emitted from a holey-plate has been studied. In this holey-plate (HP) plasma source, microwave power at 2.45 GHz supplied from the cavity is converted into an evanescent mode through the use of a holey-plate. Two different geometries of the HP plasma source, a partial–coaxial cavity type and a rectangular waveguide type, have been designed. In the former, the plasma density is 8.7×10 17 m −3 with an electron temperature of 3 eV at an argon gas pressure of 1.3 Pa. In the latter, the measured results of the polymer-resist ashing rate and its uniformity using the oxygen plasma are shown. It is possible to etch polymers at rates larger than 1 μm/min without heating the substrate, further obtaining a uniformity of ±24% within a 6″ Si wafer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Plasma Diagnostics and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Komachi · J Vac Sci Technol A · 1993 · 11 · 16410.1116/1.578284 ↗
2. Kimura · Jpn J Appl Phys · 1995 · 34 · L107610.1143/JJAP.34.L1076 ↗
3. Nagatsu · Jpn J Appl Phys · 1996 · 35 · L34110.1143/JJAP.35.L341 ↗
4. Marec · 1998 · 1
5. Yoshida · Rev Sci Instr · 1998 · 69 · 203210.1063/1.1148894 ↗
6. Ogura H, Miyazawa K, Yoshida Y. In: Kand M, editor. Proceedings of the 15th Symposium on Plasma Processing, Hamamatsu, Japan, Division of Plasma Electronics, the Japan Society of Applied Physics, Tokyo, 1998. p. 558–61.
7. Yoshida · Rev Sci Instr · 1999 · 70 · 171010.1063/1.1149655 ↗
8. Paraszczak · 1993 · 445