Low temperature preparation of transparent, antireflective TiO2 films deposited at different O2/Ar ratios by microwave electron cyclotron resonance magnetron sputtering
Source abstract
Abstract
Abstract A serial of crystalline titanium oxide ceramic films were deposited at low temperature using microwave electron cyclotron resonance (MW-ECR) magnetron sputtering with different O2/Ar ratios. The influences of O2/Ar ratio on the deposition rate, morphology, crystalline nature, optical adsorption property of the obtained titanium oxide thin films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM) and UV–Vis spectra. Therefore, the optimum O2/Ar ratio for deposition of anatase TiO2 thin films on unheated glass substrate was realized in a MW-ECR magnetron sputtering process. The as-deposited anatase TiO2 films were transparent and were antireflective in the visible region.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Copper-based nanomaterials and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Comparison of TiO2 and other dielectric coatings for buried contact solar cells: a review10.1002/pip.529 ↗
2. ZnO nanostructures for dye-sensitized solar cells10.1002/adma.200803827 ↗
3. Highly sensitive/selective miniature potentiometric carbon monoxide gas sensors with titania-based sensing elements10.1111/j.1551-2916.2009.03500.x ↗
4. Transparent anatase nanocomposite films by the sol–gel process at low temperatures10.1111/j.1151-2916.2000.tb01178.x ↗
5. Titanium oxide thin films on organic interfaces through biomimetic processing10.1111/j.1151-2916.1998.tb02347.x ↗
6. Effect of the oxygen deficiency of ceramic TiO2−x targets on the deposition of TiO2 thin films by DC magnetron sputtering10.1002/sia.1867 ↗
7. Sputter deposition and surface treatment of TiO2 films for dye-sensitized solar cells using reactive RF plasma10.1016/j.tsf.2006.10.079 ↗
8. Effect of annealing on the structural, electrical and optical properties of nanostructured TiO2 thin films10.1002/crat.200900073 ↗
9. The influence of pressure on the structure and the self-cleaning properties of sputter deposited TiO2 layers10.1016/j.tsf.2009.12.091 ↗
10. Room temperature growth of nanocrystalline anatase TiO2 thin films by dc magnetron sputtering10.1016/j.physb.2009.11.061 ↗
11. Nanostructure of photocatalytic TiO2 films sputtered at temperatures below 200 °C10.1016/j.apsusc.2007.12.003 ↗
12. Effect of the substrate temperature on the properties of the RF sputtered TiO2 thin films10.1002/pssc.200983739 ↗
13. Photocatalytic activity of dc magnetron sputter deposited amorphous TiO2 thin films10.1016/j.apsusc.2007.07.009 ↗
14. Langmuir probe diagnostics of microwave electron cyclotron resonance (MW-ECR) plasma10.1016/j.vacuum.2008.05.030 ↗
15. Composition and texture of TiN thin films fabricated by ECR enhanced sputtering deposition10.1016/j.surfcoat.2006.07.107 ↗
16. The effect of O2 partial pressure on the structure and photocatalytic property of TiO2 films prepared by sputtering10.1016/j.matchemphys.2004.10.038 ↗
17. Investigation on properties of TiO2 thin films deposited at different oxygen pressures10.1016/j.optlastec.2007.09.003 ↗
18. Dependence of working gas pressure and ratio of Ar to O2 on properties of TiO2 films deposited by facing targets sputtering10.1016/S0040-6090(02)00806-4 ↗
19. The influence of O2 partial pressure on the structure and surface wettability of C-modified TiO2 films prepared by magnetron co-sputtering10.1016/j.cplett.2008.03.078 ↗
20. The effect of oxygen concentration on the low temperature deposition of TiO2 thin films10.1016/j.surfcoat.2007.08.075 ↗
21. Co-emission of UV, violet and green photoluminescence of ZnO/TiO2 thin film10.1016/j.matlet.2007.03.019 ↗