journal article·2021-12

TEM study of bubble formation in Ti–Ta–Si–Ni metallic glass surface alloy on TiNi SMA substrate during additive thin-film electron-beam synthesis

V.P. Rotshtein, V.O. Semin, S.N. Meisner, L.L. Meisner, F.A. D'yachenko, A.A. Neiman, A.B. Markov, E.V. Yakovlev

Vacuum· Volume 194
Publisher page

Abstract

Abstract Recently, Ti–Ta-based metallic glass surface alloys (MGSAs) with attractive surface properties were successfully synthesized on TiNi substrates by additive pulsed melting of film/substrate systems. However, undesirable nanobubbles are often formed in the amorphous matrix. In this work, to reveal bubble characteristics and clarify the origin of its formation, the ∼1.5-μm thick Ti–Ta–Si–Ni MGSA was synthesized by 10-fold alternating of magnetron co-deposition of Ti60Ta30Si10 thin (100 nm) film and its pulsed e-beam (∼2.5 μs, ∼15 keV, 1.7 J/cm2) melting with a TiNi substrate. Transmission electron microscopy was utilized for quantitative analysis of bubbles. It has been shown that the Ar trapped during film deposition is the majority gas inside the bubbles. The Ar pressure inside the bubbles with mean diameter in range of ∼9 ÷ 16 nm predicted from the equation of state for Ar at 300 K varies in depth from ∼100 to 50 MPa. Experimental results and estimates of diffusion of Ar atoms in the surface melt indicate that nucleation and growth of bubbles occur in the Ar supersaturated liquid phase at the solidification/glass transition front. A high bubble-forming ability of Ti–Ta–Si–Ni system is consistent with the facts that Si addition decreases the melt surface tension and increases the Ar diffusivity due to eutectic reactions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Ion-surface interactions and analysis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Thin film metallic glasses: unique properties and potential applications10.1016/j.tsf.2012.03.092 ↗
2. A novel Ti-based nanoglass composite with submicron–nanometer-sized hierarchical structures to modulate osteoblast behaviors
3. In vitro biocompatibility response of Ti–Zr–Si thin film metallic glasses10.1016/j.apsusc.2014.09.204 ↗
4. Metallic glass thin films for potential biomedical applications10.1002/jbm.b.33135 ↗
5. Nanoimprinting of Ti-Cu-based thin-film metallic glasses deposited by unbalanced magnetron sputtering10.1016/j.jallcom.2016.11.174 ↗
6. Cytocompatibility assessment of Ti-Nb-Zr-Si thin film metallic glasses with enhanced osteoblast differentiation for biomedical applications10.1016/j.colsurfb.2018.09.041 ↗
7. Thin film metallic glasses: properties, applications and future
8. Fatigue property improvements of Ti–6Al–4V by thin film coatings of metallic glass and TiN: a comparison study10.1016/j.tsf.2013.08.027 ↗
9. Generation of low-energy high-current electron beams in plasma-anode electron guns10.1134/S1063780X18010130 ↗
10. Physical foundations for surface treatment of materials with low energy, high current electron beams10.1016/S0257-8972(99)00604-0 ↗
11. Surface treatment of materials with low-energy, high-current electron beams
12. Suryanarayana · 2017
13. A РИТМ-СП facility for the surface alloying, Intrum10.1134/S0020441211050149 ↗
14. Yu.P. Mironov, T.M. Poletika, S.L. Girsova, D.A. Shepel, Microstructural characterization of Ti-Ta-based surface alloy fabricated on TiNi SMA by additive pulsed electron-beam melting of film/substrate system, J10.1016/j.jallcom.2017.09.238 ↗
15. Mechanical behavior of Ti-Ta-based surface alloy fabricated on TiNi SMA by pulsed electron-beam melting of film/substrate system10.1016/j.apsusc.2017.12.107 ↗
16. Atomic structure of an amorphous Ti-Ta-based surface alloy synthesized on a TiNi substrate by an electron-beam method10.1016/j.apsusc.2019.06.179 ↗
17. E.Yu. Gudimova, F.A. D'yachenko, R.R. Mukhamedova, Microstructural characterization and mechanical behavior of nanocomposite Ti-Ni-Nb surface alloys synthesized on TiNi SMA substrate by additive thin film electron-beam mixing10.1016/j.matchar.2020.110455 ↗
18. Microstructural characterization and properties of a Ti-Ta-Si-Ni metallic glass surface alloy fabricated on a TiNi SMA substrate by additive thin-film electron-beam method10.1016/j.surfcoat.2020.126455 ↗
19. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
20. Nucleation and growth of bubbles in He ion-implanted V/Ag multilayers10.1080/14786435.2010.526647 ↗
21. Surface mechanoengineering of a Zr-based bulk metallic glass via Ar-nanobubble doping to probe cell sensitivity to rigid materials10.1021/acsami.7b12663 ↗
22. Influence of helium on the nucleation and growth of bubbles in silicon: a multiscale modeling study10.1088/1361-6463/ab3816 ↗
23. Threshold for argon bubble growth in sputtered amorphous Nb3Ge10.1063/1.97755 ↗
24. Influence of the substrate bias on the size and thermal stability of grains in magnetron-sputtered nanocrystalline Ag films10.1557/JMR.2005.0143 ↗
25. Inert gas bubble formation in magnetron sputtered thin-film CdTe solar cells10.1098/rspa.2020.0056 ↗
26. Tunes · Microstructural origins of the high mechanical damage tolerance of NbTaMoW refractory high-entropy alloy thin films Materials and Design · 2019 · 170 · 107692
27. Quantitative measurement of argon inside of nano-sized bubbles in ODS steels10.1016/j.jnucmat.2011.01.104 ↗
28. Umakoshi · Microstructure and plastic deformation of melt spun amorphous Fe-Zr-B alloy ribbons containing nanocrystallites Scripta mater · 2000 · 43 · 349
29. Structural investigation of Ni–Nb–Ti–Zr–Co–Cu glassy samples prepared by different welding techniques10.1016/j.mseb.2007.09.034 ↗
30. Novel deformation-induced polymorphic crystallization and softening of Al-based amorphous alloys10.1016/j.actamat.2018.01.016 ↗
31. Extrapolated equation of state for rare gases at high temperatures and densities10.1016/0022-3115(81)90575-4 ↗
32. Measurement and estimation of temperature rise in TEM sample during ion milling10.1016/j.ultramic.2007.01.002 ↗
33. Surface damage formation during ion-beam thinning of samples for transmission electron microscopy10.1016/S0304-3991(00)00096-6 ↗
34. Minimization of amorphous layer in Ar+ ion milling for UHR-EM10.1016/j.ultramic.2011.03.004 ↗
35. Low-energy (2-5 keV) argon damage in silicon10.1088/0022-3727/19/4/013 ↗
36. Robinson
37. Foil thickness measurements from convergent beam diffraction patterns an experimental assessment of errors10.1080/01418618208239917 ↗
38. Tools for semi-automatic measurement of crystal thicknesses10.1107/S1600576716019476 ↗
39. Helium bubble evolution and hardening in 316L by post-implantation annealing10.1016/j.jnucmat.2018.01.017 ↗
40. Handbook of auger electron spectroscopy: a reference book of standard data
41. Surface spectroscopic characterization of titanium implant materials10.1016/0368-2048(95)02530-8 ↗
42. AES and XPS study of thin RF-sputtered Ta205 layers10.1016/0169-4332(94)00538-9 ↗
43. Development and characterization of an ultrathin barium oxide film on a surface oxidized Ni(110) substrate, Synthesis and Reactivity in Inorganic10.1080/15533170802132311 ↗
44. The oxide handbook
45. Investigation of blister formation in sputtered Cu2ZnSnS4 absorbers for thin film solar cells10.1116/1.4926754 ↗
46. Inert gas cluster formation in sputter-deposited thin film CdTe solar cells10.1016/j.tsf.2019.137614 ↗
47. Internal stresses in metallic films deposited by cylindrical magnetron sputtering10.1016/0040-6090(79)90550-9 ↗
48. Removing the energetic neutral problem in sputtering10.1116/1.578695 ↗
49. Perspective on stresses in magnetron-sputtered thin films10.1116/1.579073 ↗
50. Study of the discharge gas trapping during thin-film growth10.1016/S0042-207X(00)00359-6 ↗
51. Disilicide systems10.1007/BF00902641 ↗
52. Correlation between glass transition temperature and melting temperature in metallic glasses10.1016/j.matdes.2014.04.021 ↗
53. Springer handbook of condensed matter and materials data
54. Bubble nucleation from gas cavities – a review10.1016/S0001-8686(98)00074-8 ↗
55. A three-phase model of hydrogen pore formation during the equiaxed dendritic solidification of aluminum-silicon alloys, Metall10.1007/s11663-002-0006-5 ↗
56. Observations of nanoporous foam arising from impact and rapid solidification of molten Ni droplets10.1063/1.2749183 ↗
57. Argon solubility in liquid steel10.1007/s11663-000-0067-2 ↗
58. Diffusion of oxygen in liquid copper and nickel
59. Diffusion in metallic glasses and supercooled melts10.1103/RevModPhys.75.237 ↗
60. Physical chemistry of metallurgical processes
61. Excess free volume in metallic glasses measured by X-ray diffraction10.1016/j.actamat.2004.12.011 ↗
62. Roles of minor additions in formation and properties of bulk metallic glasses10.1016/j.pmatsci.2006.07.003 ↗
63. Revisiting the glass-forming ability of Ti–Ni–Si ternary alloys10.1016/j.jallcom.2008.07.055 ↗