journal article·2021-08Open access

Functionalization of microfluidic devices by microstructures created with proton beam lithography

Emad Nady, Gyula Nagy, Róbert Huszánk

Vacuum· Volume 190

Abstract

Microfluidic devices have become important part of technology nowadays in numerous fields of application, such as chemical reactions, biosensors, synthesis of nanomaterials, diagnostic device for detection of biological samples, etc. In this work, as a new fabrication approach, poly(dimethyl-siloxane) (PDMS) microstructures were integrated into PDMS microdevices by combining proton beam lithography and conventional UV lithography fabrication techniques. This way, the microstructures and the microdevices can be made from the same material, which is not only useful, but in case of certain applications, it is essential. This work deals with the design of various microfluidic devices with and without integrated microstructures, for passive mixing purposes. The investigation involves the computer simulation and optimization, and then the fabrication of the chips with the above mentioned methods. Finally, the analysis of the mixing efficiency of the micromixer devices was realized with UV/vis spectroscopy at different fluid flow rates. Compared to the small size of the whole mixing chip, high mixing efficiency could be achieved.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microfluidic and Capillary Electrophoresis Applications · Advancements in Photolithography Techniques · Innovative Microfluidic and Catalytic Techniques Innovation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A gas chromatographic air analyzer fabricated on a silicon wafer10.1109/T-ED.1979.19791 ↗
2. Microfluidic diagnostic technologies for global public health10.1038/nature05064 ↗
3. The origins and the future of microfluidics10.1038/nature05058 ↗
4. New microbiology tools for public health and their implications 110.1146/annurev.publhealth.26.021304.144522 ↗
5. Chaotic mixer for microchannels10.1126/science.1066238 ↗
6. An overlapping crisscross micromixer10.1016/j.ces.2006.09.048 ↗
7. Investigation of the convective motion through a staggered herringbone micromixer at low Reynolds number flow10.1016/j.ces.2005.10.068 ↗
8. Research on staggered oriented ridges static micromixers10.1016/j.snb.2005.06.023 ↗
9. PDMS microchannels with slanted grooves embedded in three walls to realize efficient spiral flow10.1016/j.sna.2004.08.033 ↗
10. A novel in-plane passive microfluidic mixer with modified Tesla structures10.1039/b305892a ↗
11. Ultrasonic micromixer for microfluidic systems10.1016/S0924-4247(01)00654-9 ↗
12. A minute magneto hydro dynamic (MHD) mixer10.1016/S0925-4005(01)00851-6 ↗
13. Active mixing inside microchannels utilizing dynamic variation of gradient zeta potentials10.1002/elps.200500402 ↗
14. Electrohydrodynamic mixing in microchannels10.1002/aic.690490825 ↗
15. A novel microfluidic mixer utilizing electrokinetic driving forces under low switching frequency10.1002/elps.200410222 ↗
16. Laminar mixing in different interdigital micromixers: I. Experimental characterization10.1002/aic.690490304 ↗
17. Simulation of miscible diffusive mixing in microchannels10.1016/j.snb.2006.10.025 ↗
18. Hydrodynamic focusing on a silicon chip: mixing nanoliters in microseconds10.1103/PhysRevLett.80.3863 ↗
19. Microstructure for efficient continuous flow mixing10.1039/a902237f ↗
20. Two-fluid mixing in a microchannel10.1016/j.ijheatfluidflow.2004.03.006 ↗
21. Effects of microchannel geometry on pulsed flow mixing10.1016/j.mechrescom.2006.01.007 ↗
22. Rapid three-dimensional passive rotation micromixer using the breakup process10.1088/0960-1317/14/1/302 ↗
23. Helical flows and chaotic mixing in curved micro channels10.1002/aic.10188 ↗
24. Micro T-mixer as a rapid mixing micromixer10.1016/j.snb.2004.02.008 ↗
25. Topologic mixing on a microfluidic chip10.1063/1.1686895 ↗
26. Molecular diffusive scaling laws in pressure-driven microfluidic channels: deviation from one dimensional Einstein approximations10.1016/S0925-4005(01)00990-X ↗
27. A modular microfluid system with an integrated micromixer10.1088/0960-1317/6/1/023 ↗
28. Hydrodynamic focusing on a silicon chip: mixing nanoliters in microseconds10.1103/PhysRevLett.80.3863 ↗
29. Micromixing of miscible liquids in segmented gas- liquid flow10.1021/la0482406 ↗
30. A microfluidic system for controlling reaction networks in time10.1002/ange.200390172 ↗
31. Rapid microfluidic mixing10.1021/ac010895d ↗
32. Chaotic mixer for microchannels10.1126/science.1066238 ↗
33. A review on micromixers10.3390/mi8090274 ↗
34. Optimized modular design and experiment for staggered herringbone chaotic micromixer10.1515/ijcre-2014-0123 ↗
35. Nguyen · 2002
36. Direct formation of high aspect ratio multiple tilted micropillar array in liquid phase PDMS by proton beam writing10.1016/j.eurpolymj.2015.06.023 ↗
37. 4He+ ion beam irradiation induced modification of poly(dimethylsiloxane). Characterization by infrared spectroscopy and ion beam analytical techniques10.1021/la200202u ↗
38. Wide range control in the elastic properties of PDMS polymer by ion beam (H+) irradiation10.1016/j.polymdegradstab.2018.05.004 ↗
39. Comparative analysis of passive micromixers at a wide range of Reynolds numbers10.3390/mi6081166 ↗