Infiltrated tungsten-copper composite reinforced with short tungsten fibers
Source abstract
Abstract
Abstract To achieve an enhancement of mechanical properties, the WCu composite reinforced with short tungsten fibers was advocated. Characteristics including phase constituents, microstructure and mechanical properties (tensile, compressive and frictional behaviors) of the Wf reinforced WCu composite have been systematically investigated. The magnetron sputtered Ti layer on the surface of Wf effectively improved the sinterability of the composite, leading to excellent electrical conductivity of 56.55% IACS and hardness of 182 HB. Cross sectional EBSD results clearly reveals the sharp fiber texture according to the {110} pole figure of the Wf part, indicating a reserved texture structure although after high-temperature sintering and infiltration, which ensures the fiber strengthening effect. Further tests confirmed the enhancement of mechanical properties including high tensile strength of 549.0 MPa and compressive strength of 1047.8 MPa with large plasticity, as well as low friction coefficient of 0.494. A three dimensional model via numerical simulation further revealed that the smaller the angle between the axial direction of the inserted fibers and the loading direction, the easier it was to bear a higher stress, and the middle part of the fiber was more vulnerable to the accumulated damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Assessment of solid state and liquid phase sintering models by comparison of isothermal densification kinetics in W and W-Cu systems10.1016/j.actamat.2015.12.041 ↗
2. Microstructure transformation after arc erosion of W-30wt.%Cu contact material10.1016/j.vacuum.2018.01.004 ↗
3. The thermo-mechanical behavior of W-Cu metal matrix composites for fusion heat sink applications: the influence of the Cu content10.1016/j.jnucmat.2017.08.020 ↗
4. Enhanced mechanical and arc erosion resistant properties by homogenously precipitated nanocrystalline fcc-Nb in the hierarchical W-Nb-Cu composite10.1016/j.compositesb.2018.11.025 ↗
5. Prospects of use of electromagnetic railgun as plasma thruster for spacecrafts10.1016/j.actaastro.2017.12.035 ↗
6. Thermal deformation behavior of the Al2O3-Cu/(W, Cr) electrical contacts10.1016/j.vacuum.2019.03.054 ↗
7. Rapid consolidation of ultrafine grained W-30wt.% Cu composites by field assisted sintering from the sol-gel prepared nanopowders10.1016/j.jallcom.2017.07.023 ↗
8. Investigation on the interfacial stability of multilayered Cu-W films at elevated deposition temperatures during co-sputtering10.1016/j.vacuum.2019.04.063 ↗
9. Synthesis and characterization of nanoscale tungsten particles with hollow superstructure using spray drying combined with calcination process
10. 2D MoS2 PDMS nanocomposites for NO2 separation10.1002/smll.201501129 ↗
11. Enhanced quantum efficiency from a mosaic of two dimensional MoS2 formed onto aminosilane functionalised substrates10.1039/C6NR02197B ↗
12. Synergistic outstanding strengthening behavior of graphene/copper nanocomposites10.1016/j.compositesb.2019.107235 ↗
13. Fabrication and properties of the W-30wt%Cu gradient composite with W@WC core-shell structure10.1016/j.jallcom.2017.03.064 ↗
14. Microstructure and properties of W-30 wt.%Cu composites reinforced with WC particles prepared by vapor deposition carbonization
15. Microstructure and properties characterization of tungsten-copper composite materials doped with graphene10.1016/j.jallcom.2016.10.310 ↗
16. Excellent wear resistance and compressive performance of ultrafine-grained W-25wt.%Cu composite reinforced with MWCNTs10.1016/j.jmrt.2018.11.003 ↗
17. Porous plug made of tungsten wires and its conductance10.1016/0042-207X(91)90003-2 ↗
18. Jech · 1963
19. Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum10.1016/0022-5096(65)90035-9 ↗
20. Fabrication and properties of the W-Cu composites reinforced with uncoated and nickel-coated tungsten fibers10.1016/j.ijrmhm.2017.11.020 ↗
21. Preparation and properties of ultrafine-grained W-Cu composites reinforced with tungsten fibers10.1016/j.matlet.2019.01.146 ↗
22. Self-sharpening ability enhanced by torque gradient in twisted tungsten-fiber-reinforced Cu-Zn matrix composite10.1016/j.jallcom.2019.04.281 ↗
23. Effects of low-content activators on low-temperature sintering of tungsten10.1016/j.jmatprotec.2008.09.026 ↗
24. A study on the sintering of ultrafine grained tungsten with Ti-based additives10.1016/j.ijrmhm.2016.11.013 ↗
25. Effect of alloying interlayer on interfacial bond strength of CuW/CuCr integral materials10.1016/j.msea.2010.05.041 ↗
26. Amorphous MoSx coated TiO2 nanotube arrays for enhanced electrocatalytic hydrogen evolution reaction10.1021/acs.jpcc.8b01678 ↗
27. Synergetic coupling of Pd nanoparticles and amorphous MoSx toward highly efficient electrocatalytic hydrogen evolution reactions10.1016/j.apmt.2018.09.001 ↗
28. Recrystallization kinetics of warm-rolled tungsten in the temperature range 1150-1350 degrees10.1016/j.jnucmat.2014.08.037 ↗
29. Correlation of microstructural and mechanical properties of K-doped tungsten fibers used as reinforcement of tungsten matrix for high temperature applications10.1016/j.ijrmhm.2018.12.007 ↗
30. Vacuum diffusion bonding W to W-Cu composite: interfacial microstructure and mechanical properties10.1016/j.vacuum.2019.03.060 ↗